I uploaded some pictures into Elements 11.

They were shot in RAW but automatically converted to JPEG.  Is there anyway I can keep them in RAW until after they are enhanced and then save them as JPEG?
Thank You for your help
Tonya Lee Kent

Hi,
If your RAW images are automatically converted to JPEG by your camera and you haven't have the RAW copy of them .There is no way to restore them originally .
If you want to editing on Raw images just open them in PSE Editor ,they will automatically open in the Camera raw window(ACR)  where you can enhace them using sliders and then save to JPEG.
Thanks,
earth-star

Similar Messages

  • How do I download my Nikons pictures into Elements?

    How do I download my Nikons pictures into Elements?

    Hi,
    Insufficient data to give a precise answer.
    Which operating system are you running on?
    Which version of Photoshop Elements are you using?
    Which camera model are the images from?
    If you are shooting in raw (NEF) format it depends very much on the version of elements and the camera model.
    This might help if you are new to elements
    http://tv.adobe.com/watch/learn-photoshop-elements-12/importing-photos-from-a-camera/
    Brian

  • I have bought a new iPad 2 charger and it works absolutely fine but then I wanted to upload some pictures on the computer so I put the wire in the right places but it doesn't work so I tried my iPhone and it worked fine?

    I have bought a new iPad 2 charger and it works absolutely fine but then I wanted to upload some pictures on the computer so I put the wire in the right places but it doesn't work so I tried my iPhone and it worked fine?

    Plz answer as soon as possible

  • IPhoto on Macbook; Photostream not uploading some pictures

    All my iCloud/Photostream settings have been on on all my Apple devices.
    However, Photostream on iPhoto on my Macbook are missing some of the pictures that I took from my iPhone for about a month. (Say from Feb-Mar)
    All the pictures taken before and after that period are uploaded as usual. I did not change any settings during that period.
    The only thing I can think of is that I did not open iPhoto on my computer at all during that period while I use my Macbook. Does this even matter?
    Of course my phone&computer had been on wifi network during that period all the time.
    What could be the possible reason that iPhoto is not uploading these pictures?

    Disable Photo Stream in the System/iCloud preference pane
    and in iPhoto's Photo Share preference pane.
    Reboot and reenable both respectively. That should jump start Photo Stream.
    OT

  • How to batch upload some data into SAP system?

    Hi All:
    I'm a SAP key user in our company, I want to know how to batch upload master data into SAP system? What t-code we can use for batch input?
    Thanks in advance!

    Hi,
    I think at least there are four methods for batch input which you can use in SAP system:
    Standard mass change t-code: for example, MM17 for mass change of material master data, you can find the mass change t-code under the relevant function module;
    T-code SCAT, you can use to record and generate the simple batch input template, it's easy to use for key user;
    T-code LSMW, it's another transaction to generate batch input template, it's often used at the beginning of SAP rollout;
    ABAP program, of course, ABAP is a universal tool for everything, you can use ABAP to generate a batch input program to upload data into SAP system as well.
    So you had better contact your SAP support department, help you to upload data!
    Good luck
    Tao

  • Pictures Into Elements?

    When I import photos to hard drive, want ask me do I want to put photos into Elements, how reinstate this feature that I had before and lost?
    Can you reply to [email protected] subject Elements?

    Hi, when you connect you device, dont you get a Auto play dialog? In case you dont can you please tell which OS you are using?
    Cheers:)
    Swarnima

  • Why can't i upload raw pictures into photoshop elements 9. it use to let me  but not anymore?

    I have Photoshop Elements 9 have been using it for a couple of years now and have always been able to upload the jpeg and raw pictures and now it is not allowing me to upload raw.
    I have uninstalled and re installed but still not working.
    Can someone please give me some ideas on how to fix this.
    It is probably something so simple i just can't figure it out
    THANKS
    Emm N

    It shows see below. thanks for all the help
    Elements Organizer 9.0.0.0
    Core Version: 9.0 (20100929.m.9165)
    Language Version: 9.0 (20100929.m.9165)
    Current Catalog:
    Catalog Name: My Catalog
    Catalog Location: C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog\
    Catalog Size: 2.4MB
    Catalog Cache Size: 18.1MB
    System:
    Operating System Name: 2000
    Operating System Version: 6.1 Service Pack 1
    System Architecture: Intel CPU Family:6 Model:7 Stepping:10 with MMX, SSE Integer, SSE FP
    Built-in Memory: 2GB
    Free Memory: 1.6GB
    Important Drivers / Plug-ins / Libraries:
    Microsoft DirectX Version: 9.0
    Apple QuickTime Version: Not installed
    Adobe Reader Version: 9.1
    Adobe Acrobat Version: Not installed
    CD and DVD drives:
    D: (HL-DT-ST DVDRAM BUS: 2 ID: 2 Firmware: GT20N)

  • When I upload new pictures to Elements 10 or Lightroom 4, will they automatically sync to Revel?

    Hello,
    My pictures made the transition to Revel, however when I go to the Revel website and sign in, I do not see the pictures from my Elements 10 catalogues or my Lightroom pictures. Is there some setting I need to switch?
    Thanks

    Well there is no way of communication between Elements 10 with Revel as of now.
    So you will only see the images which got transitioned (and those are only jpegs). In short, there is no setting so as to automatically backup your Elements 10 catalog.
    For Lighroom, you may like to view following page:
    http://help.adobe.com/en_US/lightroom/using/WS2bacbdf8d487e582-46da1b6f13419e06a64-8000.ht ml

  • I'd like to upload some pictures to my iPod

    but i don't know how.
    my present settings:
    open iTunes when this iPod is connected is unchecked
    only synch checked items is unchecked and greyed out
    manually manage music and videos is checked
    enable disk use is greyed out, but checked
    are my settings ok the way they are?
    aish! i wish this stuff was more 'intuitive!'
    cheers,

    Syncing Photos from a Mac
    Scroll up a bit and there's a link to the Windows instructions.
    Regards,
    Colin R.

  • Unable to upload any files into a folder

    Hi,
    i was trying to upload some files into KM Content/root/Document
    i tried to upload a pdf then i got this error
    "  "Enterprise_Portal_Cookbook_Vol_1.pdf" does not exist, or file is empty; you cannot upload empty files.  "
    i tried to upload some text files n i keep getting the same error.
    can anyone Please tell me what is the reason behind it.

    Venkat,
    Welcome to SDN.
    Please refer note 898637 . That would be the solution.
    This thread would also help
    https://forums.sdn.sap.com/click.jspa?searchID=2014008&messageID=2986367
    Points are welcome if this helps.
    Regards
    Vineeth

  • Can any one tell me how to include the company logo and some poictures into the Teststand report

    1. Can any one tell me how to include the company logo and some pictures into the Teststand report?
    2. How to include the waveforms into the report?

    http://zone.ni.com/devzone/cda/epd/p/id/3619
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • I have an Iphone 3gs and today I had taken some pictures and my battery was 8% i was looking at the few I had took. Then my phone died but when I plugged it into the charger and got it on I went to upload the pictures but they were deleted!

    I have an Iphone 3gs and today I had taken some pictures and my battery was 8% i was looking at the few I had took. Then my phone died but when I plugged it into the charger and got it on I went to upload the pictures but they were deleted! All my other pictures that i have taken are still there, it just deleted the ones I took a couple of hours before it died!
    I was just wondering if there is anyway of getting them back at all? and how common is this?

    Sounds like your iPhone was hacked to unlock and now updating locks back to the original carrier.
    Where did you get the iPhone?

  • I just loaded some July pictures into my PC iCloud photos upload folder, but I do not see them with my iPad. Are they not shared because they are past the 30 day window, or is there a different issue?

    I just loaded some July pictures into my PC iCloud photos upload folder, but I do not see them with my iPad. Are they not shared because they are past the 30 day window, or is there a different issue?

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

  • How do I download RAW pictures from a Panasonic TZ60 into Elements, keeps telling me file damaged or in format not recognised.

    I have just purchased a Panasonic TZ60 which is producing some good quality pictures. The camera can be set to save picture in jpeg, RAW and jpeg and RAW but I have been unable to download any RAW pictures into either iPhoto or Elements. Both programmes see the file but won't download and comes up with message saying file damaged or not recognised.
    I have tried just transferring RAW picture file to my desktop and then into Elements, still no joy.

    Thanks John
    Missed updating so went in search and found update path and that has resolved and can now pull in RAW, just need to crack iPhoto now and will be happy again.
    Thanks for help
    Garry

  • Hi. After I have loaded a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cut, for instance I cannot use Ctrl   T to enter free transform mode. Also the toolbar is so small I cannot see the icons without ge

    Hi. After loading a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cuts, for instance I cannot use Ctrl + T for free transform, how do I resolve this problem. In addition the tool Icons are so small I have to get close to the screen to see them, is there anyway the Icons can be made bigger without reducing the resolution of the screen.
    Thanks
    Derek

    Are you working on a background layer? If so, Ctrl + T will not work. Press Alt and double-click your background layer to convert to a normal layer (or right-click BG layer and select Layer from Background) and try again.
    If you're working in Photoshop CC 2014 you can go to Preferences > Experimental Features and tick "Scale UI 200% for high-density displays" to make your buttons and icons larger.

Maybe you are looking for

  • Empty iPod, unable to snyc

    i've had my iPod for 7 months, a few weeks ago i updated it, only to find that there was no music on it at all. i then tried to update it again, with the same to happen again. i then went on to the apple help site, which told me to manually sncy my i

  • ESS BP DC view displaying the UI items in diff language, other than english

    Hi Folks, I have imported the ESS BP into my NWDS using NWDI.  But when iam opening cat(timesheet ) related DC, all the views are displaying labels in different language, other than english.  How to get those displayed in English. Kindly guide us, if

  • Thinkpad W530 problem - Microphone not working

    Hi,  My W530 microphone's not working. Whenever any problem tries to use it (skype, audacity), it always shows a quick activity (about 0.5 ms), always with the same from - and nothing more, ever.  I have installed drivers from realtec, and the driver

  • Temporary NFS mount keep being mounted while server is powered off

    I was doing some performance testing using different file protocols (NFS, SMB mainly). The last test was with NFS, I mounted on the command line the nfs exported directory, did my test, forgot about the moment and shutdown the NFS server. Since then

  • How to 3 way call?

    I would like to make a 3 way call- can I do this with the Iphone4?