I uploaded videos to website server and when playing videos they keep buffering and stop & start

Hello, I edited videos in PP CS6 and encoded 1920x1080 clips in .mp4 format. Encoded vbr 2pass 5.00 mbps , audio is AAC 320 kbps, 48khz. The videos play perfect in player on destop, and when downloaded from site, but don't play well
in website player..Even after encoding down to 1280x720, and with a much smaller file size, they still don't play well on site. Please help-

Jim, thank you for responding to my call for help. The internet server that I am uploading videos to, says that it is something to do with my videos size. Like I said I brought the size down to 1280x720 and also
reduced the quality and size of the clips but they still buffered extensively. I had the designer change the player but that was not the problem. So I am back where I began. The server uploaded their video and it
played with no problem so I am thinking its a small correction I need for html5 playability with my clips.

Similar Messages

HT201263 i forget my passcode.now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

my itune keep showing message that i tune is downloading software for my phone. but downloading for several minutes it displays message that i tune cannot connect to my phone because it is locked with a passcode. first entre the pass code.
on the other hand phone is started with a message on screen phone is disabled.

Flash Video Slows Down Website Load, Lags When Playing

Hello, I am a designer that has encoded .Mov files to
.Flv in CS3 Flash Video Encoder. They look and play great
when previewing on my hard drive, but once uploaded to the website
host, the pages load much slower and the video sometimes stops
& lags, like it is waiting for it to load.
I used Flash CS3 Video Encoder,
settings: On2 VP6, 246kbps video, 32kbps audio; resized to
320x240. File sizes range from 5mb-13mb. When I inserted into
the html page in
Dreamweaver, I choose the
Flash Progressive Player. There are a lot of videos on this
website, approx. 20, but only one per page. The site is hosted by
godaddy.com.
Here is the temp site:
http://www.wondernumber.com/testing I thought this would be
handled by a programmer, but it got stuck in my lap. The client is
anxious to get this project done!. Any help offered is greatly
appreciated!!!!!
~Jana

Hi, thanks for the reply. I actually gave in yesterday
morning and reduced the quality of the video from 400 to 150, and
the sound from 96 to 16. Does play through now but doesn't look or
sound as good.
Do you think if I put the videos on a dedicated server I
could raise the quality and they would play smoothly?
Thank you! ~Jana

While watching videos they keep stopping and starting

Videos stop every 2-3seconds and may not start for 5 minutes

I understand that on Firefox for Android that when playing videos, they stop and start.
#Does this happen when you clear the cache and restart the browser?
#What version of Android does this happen on?
#Are there certain video files that this will happen for or a specific site?

When playing games it keeps updating

When playing words for friends or hang man it keeps updating and doesn't stop. I've tried shutting it down but it doesn't help. Any suggestions?

What do you mean by, "it keeps updating and doesn't stop"?
Do you mean that it can't seem to connect to the Words with Friends site?
If so, there could be a problem on that site or there may be a problem with your internet connection or ISP.

I can't get my cursor to completely leave the screen, so when I'm watching videos on some services the video control menu stays at the bottom of the screen. How do I make it disappear so I don't have to see the progress bar and stop/start buttons?

When I watch certain video services like amazon or Netflix and enter full screen, when I move the cursor a video menu pops up on the bottom of the screen and won't disappear until the cursor goes offscreen. But my cursor won't go fully off screen. Just the tip remains visible so the video menu doesn't leave.

What happens if you simply click the trackpad in the movie area before the cursor disappears? Does that cause the video menu to disappear?

Trying to upload to 8.1.3 and stops at a picture of a power lead going into an itunes logo? I cannot get beyond this - any ideas?

Can anyone help? I now cannot even open the ipad as it doesn't go beyond this logo.

The image means that the iPad has gone into recovery mode, it needs to be reset by connecting it to a computer's iTunes.
When you connect the iPad to your computer, does your computer's iTunes not recognise that an iPad in recovery mode has been connected to it ? That should let you reset the iPad back to factory defaults, and you can then restore to your backup or just resync your content to it.
If your computer's iTunes isn't recognising the iPad then you have an up-to-date version of iTunes installed ? These troubleshooting pages for a device not recognised in iTunes might help :
PC : iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Mac : If you don't see your connected device in iTunes for Mac - Apple Support

When playing music through iTunes, it no longer starts at a random song.

I have it set to shuffle and it used to start with a random song. Now, it always starts with the first song in my library. I prefer the random start, but after the last update, it no longer does it. Can I change this in a setting or something??

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Video streaming- keeps having to stop

anyone finding it difficult to stream videos on the iPhone 3G compared to the old 1st Gen iPhone. Sites like BBC iplayer worked fine on the 1st gen iPhone but it's slow on 3G, other sites were fine on the old one but the new one seems to crash all the time which I find frustrating. Please help.

http://docs.info.apple.com/article.html?artnum=304508
http://docs.info.apple.com/article.html?artnum=302684

Content Server And Asp e-Commerce site

Hey guys,
I've got the Content server installed and can upload books from my loacl test machine to the actualy server and download them as a preview. But im a little confused as to how to create the connection between purchasing a book and being supplied with a link? any other tutorials?
cheers
Darren Phillips
darren.c.phillips AT gmail.com

Hi Lee,
I've got that book, but I cant seem to find any working examples of a store, eg the section when the user clicks BUY BOOK and is then presented with the download link.
as for Digital Editions, would this allow me to create my own bookstore online and use DRM styles to control the features of the book? if so how can I get it?
essentially i've got Content Server to upload books to the server, and when i view them as a preview from the ADMIN acrea of the Content Server I can download the book and read it. If i try going directly to the books link on the server, im told i can not open it (which is correct).
im looking for a guide on how to create a store to encoprorate this featuer for hte books.... any ideas?
Darren

How to change your Administration Server password when you're locked out

How to change your Administration Server password when you're locked out
The Netscape server products are all managed by a single administration
server, which gives you a web forms-based interface you can use to
configure them, start/stop them, check their logs, and so forth.

There are three levels of protection that keep the general public from
being able to get into your administration server and mess up the
configuration of any Netscape servers you have installed:

<OL>
<LI> Obscurity: Your administration server can run on any port you'd
like (usually something between 81 and 30,000), so if an attacker
doesn't know what port to find your admin server on, he can't get
into it.
<LI> Host restrictions: You can tell your admin server to only allow
connections from specific hosts, and to reject all other hosts.

<LI> Password protection: Even if a user connects to your admin server
from a valid host, he won't be allowed to get into even the first
page unless he presents a valid username and password.
</OL>

If you, the legitimate administrator of your web server, are unable to
access the administration server (if you forgot your password or the
admin port number or if you accidentally locked your own site out),
then here is how to get past each of these levels of protection:

<OL>
<LI> If you don't remember what port your administration server is
running on, just look in your "ns-admin.conf" file, which is in
the "admserv" directory under your Netscape server directory.
(For 1.x web servers on Windows NT, run "regedt32" and go to the
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
You will see a "Port" entry there that specifies what port your
admin server is on. You can change this value if you want your
admin server to run on a different port, but make sure you restart
the admin server after you change the value.

<LI> If your admin server is complaining "Unauthorized host" when you
try to connect to it, then you can open it up to all sites by
going into the "ns-admin.conf" file or the "Administration"
section of your NT registry, as described above, and deleting the
lines for "Hosts" and "Addresses" (either one of those might not
be present) then restarting your admin server (on Unix run
"stop-admin" then "start-admin"; on NT go into the Services
control panel and stop/start the "Netscape Administration" or
"Netscape Admin Server" service). You will then be able to get
back into the admin server, where you can then try new settings
for your host and address restrictions if you wish.

<LI> If you have forgotten the password to your admin server and now
you can't log into your admin pages, all is not lost! Go into
your "ns-home" directory, and into the "admserv" directory under
that. You should find an "admpw" text file containing a simgle
line of text, something like this:
admin:lnOVeixulqkmU
The first part of that line is the name of your admin account
(usually just "admin"), and the second part is your admin
password, encrypted. Edit this file to remove the encrypted
password so that your file looks like this:
admin:
Then shut down your admin server, bring it back up again, and log
into your admin server but don't give any password. It should let
you in, at which point you can then go to the appropriate
configuration page to set a new admin password, and then you're
back in business.
</OL>
Note that because it is so easy to change the admin password this
way, it's good to periodically make certain that your admin
password file and your web server's configuration files are not
left world-writable, and that only trusted people have access to
them. (By default they're not world-writable, but it's good to
make sure of this from time to time.)

If you mean that yu forgo the password for yur encrypted backup then you can only:
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946

Tcode to upload file to SRM Server.

Hi,
We have a requirement to upload file into application server and then read the data into internal table.
In ECC we can use the tcode CG3Y/CG3Z but this Tcode is not available in SRM Server,
Can anyone suggest corresponding tcode in SRM server to upload data into application server.
Thanks in advance,
Jerin

Jerin,
Please go throgh the below link which will help for upload the contracts.
http://help.sap.com/saphelp_srm40/helpdata/en/e5/2c85403e1b6e1de10000000a1550b0/content.htm
Best Regards,
NMK

I have created a DVD via iMovie and burned several copies. When played the DVD's will stop and display a message SKIPPING DAMAGED Part. It is not the DVD. When trying to export the project, I get an error message.

I have created a DVD via iMovie and burned several copies. It is a large file. When played the some DVD's will stop and display a message SKIPPING DAMAGED Part but will not resume. Some work fine. It is not the DVD. I have burned from several batches. When trying to export the project, I get an error message with the following message: The project could not be prepared for publishing because an error occured (-108).

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

Downloaded new format yesterday and now when playing music the sound is low for first few seconds of each subsequent track. Is this a bug?

Under new format when playing music each track after the first starts in low volume then kicks in within 3 seconds. very irritating. is this a bug?

I'm having the same issue on my iPad (the "new iPad" / 3rd gen with retina display and 30 pin dock connector) after downloading iOS 7 (is that what you meant by the new format, updating to iOS 7?).
The music will play quietly for a few seconds then it will play at the volume it's supposed to.

My "older" songs stutter when played back

my pc is only 6 months old, but the first songs i downloaded from the itunes store
"stutter" when played back. they don't stutter on my ipod, and the more recenlty
downloaded songs are also ok. i have deleted them, reloaded from the ipod, updated
itunes, all to no avail. any ideas?

First a correction. I am using the latest version of FCP – 5.
Regarding the encoding, I have tried going from native HDV MPEG-2 to H.264 at 720P from 10 to 4 MB at 24, 30 and 29.97. The Mac seems to play everything back very well, but most PCs (the latest IBM T 40 – 43 series laptops) a couple of Dell desk tops (2.6 GHZ with 64 and 128 MB graphic cards) and a 3.2 GHz Shuttle PC with a 128 MB graphic card (that we routinely use to decode four MPEG-4, 4CIF images simultaneously and display on a 42” ED Plasma) choke/stutter to varying degrees with processor utilization hitting 100%.
So, the real issue here is what is the difference between a 720p trailer that I can download from Apple and what I can output using Compressor 2 at a similar data rate – other than the frame rate?
And why does the Compressor output stutter on most PCs?

I uploaded videos to website server and when playing videos they keep buffering and stop & start

Similar Messages

Maybe you are looking for