I use a PC with windows 7 and when I try to burn a CD from Itunes I get an error (2131) MESSAGE?

I get an error (2131) message on my Dell Vistro 1700 windows 7 computer when trying to burn a CD

clean and then reinstall, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Similar Messages

I have windows 8 and when i try to burn a disc from itunes, it says error 4310. how do i fix this?

i need help!

A 1G iPod Touch cannot be upgraded past iOS 3.1.3. So if an app you have downloaded in iTunes requires a later version of iOS than 3.1.3, I'm afraid you won't be able to sync or use that app on your device unless you upgrade to a newer device that supports a later version of iOS.
B-rock

Following new motherboard and cd/dvd reconnection, when i try to burn a disc from itunes I now get the message "The Registry settings used by itune drivers for importing and burning CD's

Basically we had a new motherboard fitted, we then found our CD/DVD drive had not been reconnected. After this has been done, when we try to burn a cd from itunes, we get the following message:-
The Registry settings used by itune drivers for importing and burning CD's and DVD's are missing. Reinstall Itunes.
I've removed and reinstalled itunes a few times now and we still have the same issue. HELP please.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Recently bought a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found."

Recently bought a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found. Would you like to locate it?" Hope you can help me solve this issue.
Thanks,
Shellyboo

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

I am working with Acrobat XI and when I try to add text to geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

I am working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

I figured it out...needed to use comment tool set, not the editing tool set.

I created a project with mostly photos and when I try to export it tells me that there is an error not enough disk space

I just want to create a slide show on final cut and make it a .mov how do I do this? I keep getting an error:out of disk space. at the end of the exporting

How large are the images (pixel wise) and what are your sequence settings.

I'm running FF 3.6.17 and when I try to log into my Blackboard page, I get an error message, "no user is currently logged in." I have noticed that some have had compatibility problems with earlier versions of FF and Blackboard, but what gives?

This recently upgraded version of Blackboard is also giving me problems with IE, and even Google Chrome. Regardless of which Windows OS I try. On these others, however, I can log in, I just can't edit.
Blackboard tech support has been blundering with this issue for two and half weeks now. But to no avail. So, I'm wondering if going back to an earlier version of FF would help.

unfortunately the fiddler2 issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

I set up a playlist in itunes and when i tried to sync it to my iphone i get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occured. Using itunes 10.5.2.11 and Windows Vista 64

I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred. Using itunes 10.5.2.11 and Windows Vista 64. Any help? Thanks in advance!

I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

Hi Prabhuram and falez,
This issue appears where there are any inconsistencies in your catalog (generally for video files). This issue may be due to offline files, missing files, video scenes. The recommendation here would be to fix these inconsistencies and try again. If that doesn't solve the issue, please follow steps mentioned in email by me.
~Surendra

My iPod classic won't charge. I just bought a new laptop with Windows 8 and when I plug in my iPod, iTunes will recogniandze it and will sync but after the syncing process ends the charging stops. Any suggestions?

MyiPod classic won't charge. I just bought a new laptop with Windows 8 and when I plug in my iPod, iTunes will recognize it and sync, but will only charge during the syncing process. Any suggestions?

rubicon53 wrote:
I just bought a new laptop and my ipod nano will not stay connected to my computer.
I cannot transfer any of my songs to my new laptop
How to use your iPod to move your music to a new computer

HT201413 I have a windows HP computer with windows 7 installed, when I try and update and restore my phone, I get an error message of there is not enough space on your computer to restore your phone. Any suggestions and help is appreciated.

I have a windows HP computer with windows 7 installed, when I try and update and restore my phone, I get an error message of there is not enough space on your computer to restore your phone. Any suggestions and help is appreciated.

You need to discard or save to an external disk and then discard some of the stuff we all tend to keep forever (movies, music, pictures, docs, apps no longer used, etc.). A clogged up disk also does not function ideally either.

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I've just got a new Dell with windows 7. When I try to download itunes it says the windows installer can't be found

I've just got a new Dell with windows 7. When I try to download itunes it says the windows installer can't be found

When your username includes a Charakter like "acson te graf" zhere is a Problem for Windows to find your installiert-Files. Yust Build another Username like "Dummy", give admistration rights, change to this user and install iTunes on this accout. Now you can Return to your Old account an use iTunes.
I am still surching how to change the username in Windows but still no idea.

I'm making a DVD with my iMOVIE and when I tried to burn a DVD I got an error message that said "ERROR IN PROJECT

I'm making a DVD with my iMOVIE and when I tried to burn a DVD I got an error message that said
"ERRORS IN PROJECT
There were errors during the project validation that have to be fixed before burning the project."
What does this mean and how do I fix it.
jim

Hi
Do You have a NEW Mac ?
Does it really have iDVD ? New ones Don't.
Please tell much more
• Mac used
• Program used (versions)
• Material used (Codecs, file formats etc)
Yours Bengt W

I use a PC with windows 7 and when I try to burn a CD from Itunes I get an error (2131) MESSAGE?

Similar Messages

Maybe you are looking for