I use a prepaid Verizon MiFi portable hot spot and I cannot get home sharing to work do I need a regular router that is hard wired to my computer? Rocket

I use a prepaid Verizon MiFi portable hot spot and I cannot get home sharing to work
!  Do i need a regular router that is hard wired to my computer?

I use a prepaid Verizon MiFi portable hot spot and I cannot get home sharing to work
!  Do i need a regular router that is hard wired to my computer?

Similar Messages

  • HT201413 I cannot get home sharing working, using windows 8 . does anyone have a solution?

    i cannot get home sharing on itunes to work using windows 8. I also have Norton 360 and have unstalled and disabled it but still cannot get home sharing to operate so that i can use the remote APP on my ipad to control music through the house. does anyone have a solution or experienced similar issue?

    Hi Pat,
    Yes I marked the question as Assumed Answered. I needed to move on. I have never taken part in a forum and couldn’t wait any longer for any input so not wanting anyone to waste the time answering me, I marked the question as assumed answered. I guess this was the wrong thing to do and I apologize to the forum.
    I did go another route and loaded and enlarged the photo in Photoshop Elements, Then cropped the photo to the area I needed to reprint. I probably should have done this in the first place!
    Again, my apology to the forum for my lack of patience in waiting for a reply.
    Diane Harris
    Sent from Windows Mail

  • I have an Ipod Video 60 GB (1st Gen from 2006) and I cannot get it to show up in my iTunes version 11.0 that I just upgraded to.  It won't show up as a disk under Disk Utility either.  I cannot get it to stop saying "Do Not Disconnect" to use it either.

    I have had the same issue with my Ipod Nano (bought 2011).  It would not show up in Itunes on my macbook unibody (2009).  Please help!

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • I just upgraded my Apple TV v2 and I can't get home sharing to work? I do have internet and can use my iPhone as a remote (home sharing ok) on the computer I'm trying to connect. Any ideas?

    I just upgraded my Apple TV 2. I am now no longer able to share music with my computers or use my Iphone as a remote. I can however use my iphone as a remote (via home sharing) with my other two macs. Any ideas?

    Windows 8 has not been officially released and is not supported.
    Try google for possible solutions... otherwise, downgrade the OS back to Windows 7 or wait until a version of iTunes is released that supports Windows 8.

  • I'm using a Brother MFC 420CN (printer, fax, scanner) and can't get the scanner to work

    I'm running Lion 10.7.2 and downloaded the latest twain plug-in for lion from Brother. I don't know where the twain driver went after I downloaded it. I searched the computer for it and it doesn't show up. I wanted to drag it into the import folder photoshop plug-ins folder in Photoshop CS5. There is no Twain plug-in the folder now. when I try to scan from the Brother Control Center I get error messages and do what the messages suggest but nothing works.I don't use the fax, I occasionally use the printer and the printer still works. There is only 1 USB  cable that drives the Brother machine.

    Plug in the usb lead.

  • HT1937 I used to have verizon as my phone carrier. But I don't no more. It's been more 5 months that I don't. I want to start using my iPhone 4 with a prepaid plan. Is that possible. Verizon said I'm not longer listed as their customer.

    I used to have verizon as my phone carrier. But I don't no more. It's been more 5 months that I don't. I want to start using my iPhone 4 with a prepaid plan. Is that possible. Verizon said I'm not longer listed as their customer.

    Verizon offers prepaid service on the iPhone 4. Go into your local Verizon Store with your phone. I'm sure they'll be happy to set you up with service.

  • Does it cost extra to use my Tab as a wifi hot spot?

    Does it cost extra to use my Tab as a wifi hot spot?

    Hello Jessicaann9607,
    Tablets don't need to subscribe to the 3G mobile hotspot feature. All usage is deducted from the mobile broadband plan.
    Hope this helps...

  • HT4145 I want to use aaple ipad 2 as wifi hot spot.

    I want to use aaple ipad 2 as wifi hot spot.
    <E-mail Edited by Host>

    The iPad 2 does not support WiFi Hotspot.

  • I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. I do not want t

    I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. For my personal use, I did not a need to join Creative Cloud. Have you any suggestions for a work-around?

    Try to install Adobe application Manager from below link and check
    Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager : Thank You

  • I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc?

    I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. I want to draw, but I cannot get any linework like I should. I also use Sketchbook Pro, and ToonBoom, and I get wonderful linework. But not with Photoshop.
    None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc and not a mac?

    Thanks for your response,
    I'm using a Fujitsu T901 laptop, with a stylus pen. Painting works great in Photoshop, but for drawing there is no sensitivity at all.  Frans Vischer
    author and illustrator of Fuddles, A Very Fuddles Christmas and Jimmy Dabble
    www.fransvischer.com
    pamperedfatcat.wordpress.com

  • I currently use a iMac OS X 10.6.8 and I cannot open iPhoto. Every time I click on iPhoto the coloured wheel comes up and lets me go no further, leaving me with no other option but to force quit the application. HELP!!

    i currently use a iMac OS X 10.6.8 and I cannot open iPhoto. Every time I click on iPhoto the coloured wheel comes up and lets me go no further, leaving me with no other option but to force quit the application.
    it is showing all my existing photos but will not let me click on any of them, nor will it allow me to import any new photos into iPhoto.
    I am really worried that I cannot access all of my photos and even more worried as I need to back them up!!
    HELP!!

    Try repair the Library:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    See if the iPad will accept the password after you restart it. It's worth a try.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You could also try a reset as well.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.

    Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.
    What can I do to get it to work again as more than an overpriced paperweight?

    Hello,
    Safe Boot from the HD, (holding Shift key down at bootup), see if you can set a good resolution.

  • HT2240 I cannot get my registration to work for QuickTime Pro for Mac OS X 10.6.8 using QT 7.6.6

    I cannot get my registration to work for QuickTime Pro for Mac OS X 10.6.8 using QT 7.6.6  I have copied and pasted exactly as require (I don't have an organization).  Any suggestions?  Thank you!

    There is no QuickTime System Preferences pane in 10.6.8 or later.
    You enter the registration under the player 7 menu.

  • I cannot get wireless mouse to work in windows 7 using bootcamp

    I cannot get wireless mouse to work in windows 7 using bootcamp

    OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

Maybe you are looking for