I use a scxi 1530 module to acquire acceleration from an accelerometer and need help to write the integration to know the deplacement

i would like to integrate the acceleration signal i receve from my accelerometer connected to my &("à MODULE SCXI TO KNOW THE DIFFERENT DEPLACEMENT OF MY SIGNAL;;NEED SOME HELP

Debonfort,
I'd like to ask a few questions for clarification.
1. What programming language are you using?
2. Are you looking for more programming assistance and calculations? Or getting data from the 1530?
3. Which version of NI-DAQ are you using?
4. What DAQ board are you connected to?
I look forward to your responses. Perhaps other users will be able to help more too with your answers.

Similar Messages

  • DIO ports used by SCXI 1530 Channels.

    Hi
    I m using SCXI 1530 module and want to know exactly which DIO ports are being engaged by the channels of this module and which ports are left for user access.
    On writing ports 5 and 6 I see following error :
    The specified resource is owned by the driver
    and can't be accessed or modified by the user.
    plz suggest some solution.
    Regards
    GNS

    The SCXI chassis uses dio lines 0,1,2, and 4. Refer to this KB on more information on how to write to the other lines.
    http://digital.ni.com/public.nsf/websearch/5979CA0B55AEB7E78625656800599623?OpenDocument
    I hope this helps solve the problem.
    Joshua

  • I have acquired a  old G5 MAXC and need to make it wireless?

    I have acquired a  old G5 MAXC and need to make it wireless?

    The majority of G5 iMacs shiped with a built-in Airport Extreme card. Started with models shipped in May 2005. To see if yours has woreless already installed, , please do "About this Mac" for your Apple menu and, in the resulting window, click the "More info.." button. That opens System Profiler.
    There is a right-hand "Contents" pane; from it, select "Airport" from the "Network section. Should look like this:
    If the main pane shows similar entries to the ones in the example, you have wireless capability.
    If you do not have an Airport card present, they are now rather inexpensive on the used/pulled market:
    http://www.ebay.com/itm/Apple-Imac-G5-AirPort-Extreme-Card-A1026-802-11g-WiFi-17 -20/121359253551?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222003%26algo%3D SIC.FIT%26ao%3D1%26asc%3D23309%26meid%3D7510110507362911239%26pid%3D100005%26prg %3D9834%26rk%3D1%26rkt%3D6%26sd%3D351073247746&rt=nc

  • HT201317 Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they a

    Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they appear OK

    Hi AP_In_Surbiton,
    I am really sorry that you have had so much trouble getting your Caller ID up and going.  I'll be happy to help you out with this and get it working for you.
    Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience. I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to s

    firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
    I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to start Firefox, even in safe mode. i have checked with latest antivirus softwere also.. i didn't find any thing suspicious.
    == This happened ==
    Every time Firefox opened
    == after loading firefox 3.6.6 ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

    I was having this problem few days ago,and I have fixed.Try this steps-If you have AVG antivirus so go on firefox>Tools>Add On and Disable AVG safe search and AVG tool bars too.Then restart computer.

  • I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the proble

    I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened

    https://forums.adobe.com/message/6219922#6219922
    See if the issue in the thread above helps you to solve your problem.

  • I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and L

    I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and LR4 were easy but I'm finding it impossible without subscribing to CC.

    Sorry, maybe I don't understand, but why do you feel compelled to subscribe to CC if you already have a permanent Lightroom 5 licence?
    For the SmugMug plugin, a simple Google search ("smugmug lightroom plugin") gives this link to download the plugin:  http://help.smugmug.com/customer/portal/articles/121321
    Another way is to click the button "Find more services online..." in the the Publish Service section of Lightroom, and to search for SmugMug in the Adobe Add-ons portal; you will find a link to the latest plugin: https://creative.adobe.com/addons/products/1755

  • My iPhone will no longer pick-up the wifi at home(comcast). My mom used to have comcast and I used to connect there as well, but she changed to verison and I connect there, but no longer can get the comcast wi-fi at home.  the wi-fi settings are ok there,

    My iPhone will no longer picks-up the wifi at home(comcast). My mom used to have comcast and I used to connect there as well, but she changed to verison and I connect there, but no longer can get the comcast wi-fi at home.  The wi-fi settings are ok there, but blank at home now.  The phone's network settings are fine because I can join other wifi networks.  I've done a reset with no results.  Is there a manual way for me to restore the comcast wifi from the router?

    First thanks for the reply and second sorry about the confusion.  I was unable to get the full message out, but here's the problem:
    Like I had mentioned, for a long time both me and my Mom had comcast and as soon as I came into both dwellings the phone would automatically jump onto either wifi network.  Then a while ago she verison and used the same Belkin router.  So there was no problem and my phone jumped on her system as usual, but at some point something happened and when I got home I noticed that the phone asked to be put on my system.  I would input the password, but it would say "unable to connect" to the network.  I did the standard things like check the network settings on the phone itself and they were fine.  Then I did a reset (actually twice) with the same result.  It seems like the phone ability to pick-up wi-fi is ok because when I go to my University I can log-in with no problem.  The only thing I noticed is when I look at the settings (on the iPhone) for the router at home the whole thing is blank.  My question is: Is there a manual way to get the phone to pick-up my router?  I need to have it on my network at home because I use DocumentsToGo a lot.  Thanks again for your response again and I hope things are clear now.  Have a great day.
    Michael

  • I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo.

    I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo. Is it possible to simply delete this blue color of the sky?

    Make your selection and then use Refine Edge.
    See this video tutorial from Bob Gager.
    https://www.youtube.com/watch?v=xrl3Qwg6zSc

  • Uloading ebook using iProducer rec'd error: ERROR ITMS-9000: "Unable to parse nav file: toc.ncx" at Book. I don't understand and need help fixing it. Please Help

    Uloading ebook using iProducer rec'd error: ERROR ITMS-9000: "Unable to parse nav file: toc.ncx" at Book. I don't understand and need help fixing it. Please Help if you've the knowledge.
    Many Thanks

    Yep, i just did it again. The entire scroll-bar widget, complete with formatted text, graphics, etc., pasted itself nicely in another book. Two different files, the same widget.
    I use the scroll-bar widgets for most of my texts. (I have audio buttons on the side, and the scripts are within the widget, to the side). My only text is within widgets, and text boxes, naturally. 
    I am following your recommendation: cleaning files, etc. I am remaking the book anew. I need to convince the EPUB bot or whatever that my file looks and works nicely on all my devices. You would expect an error message when previewing the book: 'Hey Amigo, your file is flawed, stop working on it, and get back to the drawing board." Should be able to try again next Monday.

  • Need help - I2C write/read with TAOS TCS3414 light sensor using USB-8451

    Hello, I'm new to labview and need help setting up a vi that will allow me to communicate with a digital light sensor (TAOS TCS3414) using a USB-8451. I need to use the sensor to measure light from a light source that I designed and built as part of a project im working on. I've tried looking at several labview I2C exampled but find them to be very confusing. I've used an arduino to interface with the sensor successfully but need to use labview and dont understand how to write the program. The actions are simple; I need initialize the sensor with a simple command and then request data from 8 data registers and then read that data. The data will then be used in further calculations. The portion i need help with is writing and reading from the sensor. I've attached the datasheet for the sensor as a guide. I can also provide the arduino code that i use to read data from the sensor if that would help. 
    Pleae keep in mind that i am completely new to labVIEW. I really do want to learn from this but need quick results so the more help the better. It would greately appreciate any help or explaination. 
    Attachments:
    TCS3414_Datasheet_EN_v1.pdf ‏1806 KB

    Hi Aaron,
    Here you go, this is made with a USB-8452.
    When you run the code tick the power en dac enable box on.
    Maybe you can help me with my problem, I want to use a fiber to sense light from a led.
    Do you use any fiber hardware with the TCS3414?
    gr,
    Attachments:
    TCS3414.vi ‏63 KB

  • Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

    Hi 
    Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
    How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
    For Example: if i have 4 users, A, B, C and D. what i want is:
    User A can see everything and act as a project manager or Admin.
    User B can view all projects in project centre but can change the schedule or resource assignment etc.
    User C can only act as approver of projects and can view all projects in project centre.
    User D can only view specific projects for which permissions are given.
    can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
    Thanks in Advance
    Cheers
    AJ
    Ajay Kumar

    Hi Ajay,
    Please refer to this link for detailed explanations about PS2013 security model. 
    http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
    Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
    define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
    level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
    I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
    Concerning your 4 users:
    user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
    user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
    user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
    concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
    and approves resource timesheet.
    user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
    timesheets and/or tasks updates which must be approved.
    Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

  • FM Transmitter used to work fine but stopped working, bought 2 new ones and neither work, they work with other Ipods in the house, IPOD Usb syncs fine with Computer, why won't it work with the FM transmitters anymore?

    FM Transmitter used to work fine but stopped working, bought 2 new ones and neither work, they work with other Ipods in the house, IPOD Usb syncs fine with Computer, why won't it work with the FM transmitters anymore?

    Are the other iPods models, same version as yours. The 2 New FM Tx may need a new iPod software, which you can update via iTunes.
    Good Luck!

  • Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started". I need help because i'm enable do download the new update. Thanks

    Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started".
    I need help, because i'm enable do download the new update.
    Thanks

    Type "Apple Mobile Device service" into the search bar at the top of this age by "Support" and read the resulting help articles.

  • I have lost the use of my extension pannels, and need help recovering the use. I get a message that extensions failed to load. Why?

    I have lost the use of my extension pannels, and need help recovering the use. I get a message that extensions failed to load. Why?

    I've had that before when on a really slow Internet connection.

Maybe you are looking for