I use digital voice editor 3 on my pc..... want to convert to a program for the MAC.  Any suggestions????

Hi!
Ohhhh how I hope someone out there can help me with this issue!  I use Digital Voice Editor 3 on my pc and would prefer to use my MAC however don't know of any program similar/comparable to DVE 3. 
Anyone know of anything out there I can use instead of what I'm using on the pc????
THANK YOU SO MUCH!!!!!

The best? A PowerMac (tower). Mainly due to the fact the the iMac isn't expandable. For example, all Macs have one bus for all their Firewire ports; adding a PCI Firewire card to a tower system is cheap and easy and creates a second Firewire bus that helps avoid dropped frame issues when capturing to or recording from an external Firewire drive from your DV device. Can't do that on an iMac though ... no PCI slots.
Also, having the capability of adding a second internal hard drive is something totally lacking in an iMac. If you're editing DV/DVCam/HDV, you'll get much better throughput with a second internal drive that an external drive. And with some kits available, you can have up to 5 SATA drives inside a G5 tower. The capacity for more RAM is a plus also ... I'd reccomend at least 2 gigs minimum ... but you can add more as needed.
-DH

Similar Messages

  • I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

    I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

    Purchase and use Paragon Camp Tune

  • Programming for the mac without using xcode

    Hi
    I'm very new to programming for Apple platform. I wanted to clear some doubts which is currently standing as a barrier in getting started.
    Can I use a text editor (preferably TextMate), Interface Builder, and the Terminal (without using xcode to write & compile) to develop software for the Mac. I have installed the xcode package (~900 mb image).
    Can you point me to some resources on terminal commands for compile, debug codes for the mac. (Obj-C, Cocoa api)
    Thank You.
    Message was edited by: jase21

    You can use anything you want to develop software for the Mac. In fact, I always encourage people to start out with tutorials and examples using standard UNIX command line tools like vi and gcc. There are plenty of such getting started tutorials for UNIX and Linux.
    At some point, however, the command line is going to get cumbersome. You may want go start writing true Mac applications instead if command line tools. Then it will be time to start with Xcode.

  • Digital Voice Editor 3.3

    Hi, I help a woman who transcribes a pastor's sermon using the Digital Voice Editor software. We had to replace her older XP computer with a new computer running Win 7 Home Perimum 64 bit. I have installed the latest version of DVE, but I am having a problem with it not responding. When a button or tab or even selecting a voice file is selected, the wait cursor appears and remains for several seconds without any response. The application title bar acknowledges the lengthy wait with the "(not responding)" message there as well. I have looked at system resources and we are not taxing the cpu or memory, the drive is new with very little on it, so its response too is very fast. It appears as though the program is waiting on some event or message before proceeding from every request, but I have no idea what device, event or semaphore it might be waiting on a response to continue. Any help would be greatly appreciated.
    I have not tried it in compatability mode since it states that it should work with win 7.
    Thanks,
    Mitch
    Solved!
    Go to Solution.

    Thank you for your post and welcome to the forum.
    We will need some additional information to assist with this issue, or you can contact our support line via the link below.
    http://esupport.sony.com/US/perl/suppor ... dl=ICDMX20
    1) What is the model number of the ICD unit
    2) What is the listed version number of the firmware you are using
    Sony® Digital Voice Editor Version 3.3.01

  • If i upgrade will Digital Voice Editor 2 work?

    will Digital Voice Editor if I upgrade?

    Try it and you will find out. If not, you can always revert to the old FF version.

  • I am trying to use an external HD and need to configure it for the MAC. Can someone explain how to configure the HD (Western Digital - My Passport SE)?

    Can someone help explain how to add an external HD to the Mac? I have a Western Digital My Passport SE and need to configure if for the MAC and add it to the HD location on my Mac.

    Connect the external drive to the Mac. You can do that while the Mac is on, (If the drive is one that has to be plugged into a wall outlet do that too and turn the power on.) If there is a light on the drive it should turn on.
    Now double click on the hard drive icon - top left of the screen of your computer. When it opens look for the Applications folder. Double click that. Next look for a folder called Utilities. Double click. In there you will see a file called Disk Utility.app. Double click on that.
    You will now see something like this, with two items on the left. The second one is your new drive.
    Select it - one click. And click on Erase - one of the buttons at the top, You will see this.
    You must select the Format, it's a drop down - the one shown in the image above is best. You can change the name from Untitled if you want. The name can be changed later if you prefer.
    At this point look at the bottom right. There is a button there called Erase. Click on it. Then go get yourself a cup of coffee - this will take a few minutes.

  • I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    In the Mac side of things, backups usually come in two flavors: clones or incrementals.
    A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
    Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
    As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
    Holler if you need specifics on how to do each. This was just an executive summary.

  • I am trying to play a DVD on my MacBook Pro and transmit it to my TV (use my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit to my TV?

    I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the movie from my MacBook to the TV?  I also tried an HDMI cable and had the same issue.

    you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
    this will display ur mbp main screen. good luck.

  • How do I upload to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC :) )

    How do I upload photos to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC )

    100pat wrote:
    Thanks, I can do it fine from my Windows desktop PC, I just want to know how to do it from an iPhone4
    Like I said before ask facebook or look at their support site to see if that is even a feature.

  • I need to use an older version of FireFox for the Mac (3.0) to be compatible with another program; how can I get it?

    My company uses SalesForce CRM and recently changed wholesale to Macs. Unfortunately, certain functions in SalesForce are not compatible with the current version of Safari or any version of FireFox newer than 3.0 and we need to be able to use those functions. How can I download that version for the Mac?

    There is also a portable Firefox 3.0 version via this link:
    http://prdownloads.sourceforge.net/osxportableapps/PortableFirefox_3.0_en-US-OSX_r4.0u.dmg?download
    It can take some time before the download starts.

  • HT4623 An Apple pop up keeps coming up anytime I try and use my phone and it has an old Apple ID and it is asking for the password. How do I get it to stop?

    An Apple pop up keeps coming up anytime I try and use my phone and it has an old Apple ID and it is asking for the password. How do I get it to stop?

    That means there is content on your phone...music and or apps...originally obtained using his Apple ID. Such content is forever tied to the account used to originally obtain it and cannot be transferred to another Apple ID. Your only choice is to identify and delete this content.

  • Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

    Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

    Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share,  as I am facing real problem because of this...

  • I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

    I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini with a thunderbolt cable. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

    Hi there,
    The simplest way is to drag it across wirelessly using the 'Airdrop' application once both computers are near one another. 'Airdrop' can be found near the top, on the left hand side menu, within 'Finder'.
    AJ

  • My Adobe trial for Photoshop Elements 10 for the Mac was over and I wanted to buy the application. The screen message was "Your trial has expired...but the fun doesn't have to end! Buy now to continue using Photoshop Elements 10 without having to download

    My Adobe trial for Photoshop Elements 10 for the Mac was over and I wanted to buy the application. The screen message was "Your trial has expired...but the fun doesn't have to end! Buy now to continue using Photoshop Elements 10 without having to download or re-install. " and then the button "Buy Now". When I hit the Buy Now button I am put in a field to buy Photoshop Elements 13, with no way to change to Elements 10. I do not want to go through the hassle of reinstalling etc. In fairness, it's been over a month since making the decision to buy. Still, I consider this a nightmare. Any ideas on how to buy the app I've got withou having to purchase a whole new one? Thanks.
    If worse comes to worse, will I need to uninstall the trial if I buy a new version? Can I use part of it lime download assistant?

    Adobe does not sell older versions of their software.  If you wish to purchase an older version you will have to find and take your chances with a third party vendor.

  • I plan to purchase a Mac mini and then a new iPad.  Can I use the iPad as a monitor and keyboard for the Mac mini, either through the USB connection or thru Wi-Fi?

    I plan to purchase a Mac mini and then a new iPad.  Can I use the iPad as a keyboard and screen for the Mac mini, using either the USB connector or Wi-Fi?

    I'm sorry, I should have said thru Bluetooth, not Wi-Fi.  I want to use the mini as a base station and the iPad like a laptop that I can sync when I'm home and carry with me when I travel.  Is is possible to hook these 2 up - iPad/mini, through Bluetooth?  I understand I need to use a regular monitor/keyboard/mouse on the initial install.

Maybe you are looking for