I use Firefox Browser, but I don't have a toolbar. I have tried to install the Verizon toolbar, but that just throws me back to internet Explorer 9 as my brows
I have been using Firefox as my browser, but haven't had a toolbar. I tried to use Verizon's toolbar, but that keeps throwing me back to Internet explorer 9, which I don't want to use, and asks me to use I.E 9 as my default browser. All I want is to use a toolbar with FF ( preferably verizon toolbar, but would use FF toolbar as well), and I can't seem to get one without having to use Int. Exp. 9. Any ideas as to what I can do to get a toolbar on my FF browser?
Hello Fzsishn, did you try to [https://support.mozilla.org/en-US/kb/navigation-buttons-missing#w_restoring-the-default-toolbar-set Restore the default toolbar set] ?
thank you
Similar Messages
-
I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I'm trying to install the os x but I got the point where its's asking for "administrator password". How do I get that password?
That password should be the one you used on the system *before* you do the upgrade.
If you got the computer used from someone else, you need to get in touch with them and get the password. -
I have downloaded infinity blade 3 and then deleted it because i wanted to install some other apps. but now i am trying to install the game again but its saying error 0xE8000004. I have about 6.5 GB space on my iPad. what should i do..
These might help
http://support.apple.com/kb/TS3221
http://support.apple.com/kb/TS3694 -
My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?
Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error writing to file: c:\Config.Msi\feea.rbf. What do I do?
Hi Beverly ,
Please refer to the following and see if this helps.
https://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html
Regards
Sukrit Dhingra -
Switched from Internet Explorer because seemed slow. Firefox was fast at first. Then upgraded to Firefox 4 and frequently have trouble opening. Sometimes page doesn't open, or is very slow. If I try to open again I will get Mozilla Firefox Unresponsive or a message that say "Warning-Unresponsive Script". Often have to restart and do the whole thing again. Don't really want to switch back to Internet Explorer, but getting tired of taking a half hour to get into my emails!
I am having the same problem, but not sure what's causing the slow down. Restarting in safe mode fixes the performance problem... but disabling all plug ins and extensions in normal mode (and restarting firefox) still shows the bug. Any ideas?
-
I tried to install the new itunes but didnt install correctly
I tried to install the new version of itunes. it didnt download correctly. i uninstalled itunes and tried to download it again but I keep getting a message that the "apple device support " didnt download correctly and keeps showing me "windows error code 1114.
Many thanks.
If it's saying it can't find the iTunes.msi or iTunes64.msi, we should try the following procedure.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
None.
Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah -
HT201210 I am trying to install the iOS 6 but keep getting an error message what is wrong
I'am trying to update my iPad with ios6 but it keeps showing an error message, how do
I fix this problem?"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
It doesn't matter what I'm trying to do, the pages won't load ("respond") or the program crashes. I can't even get the program to quit without going to task manager and forcing it to close. I've actually had to go back to using Internet Explorer, which has it's own problems, but at least it doesn't crash on me. Please help!!!
Basics from the user guide are restart, reset, restore from backup, restore as new. If you go through ALL of those steps and you still have issues, you need to get your phone checked out by Apple.
-
Firefox 4 will not go to the selected webpage; the round arrow keeps turning and nothing happens or sometime it works after a minute or so. Internet Explorer works fine.
Configure your Firewall and Antivirus
https://support.mozilla.org/en-US/kb/configure-windows-firewall-allow-firefox-access -
I am new to MAC systems...i bought one recently i loaded with some items i dont want anymore on the MAC. i attempted resetting to default settings but instead, i erroneosly wiped off the entire hard drive clean. I attempted to reinstall the the OS X, but i kept on having download failure. what i can do to salvage the situation.
but i kept on having download failure.
May be your internet connection ...
OS X Recovery requies a high speed broandband connection via Wi-Fi or Ethernet as noted here > OS X: About OS X Recovery
If it's convenient, you can sign up for Apple workshops > Apple - One to One -
I'm trying to install the iOS 7 but it doesn't work how can I install it?
I can't install my iOS 7 it doesn't work how can I install
It?I suggest you scroll down and use the "Update your device using iTunes" method here:
http://support.apple.com/kb/HT4623 -
Everytime I try to install the new Itunes It fails. I've tried downloading the set up twice with the same effect.
See Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
CREATE OR REPLACE PROCEDURE cdsshell.prc_drop_partition (days IN NUMBER) AS l_sqlerrm VARCHAR2(4000); BEGIN <<Code >> EXCEPTION WHEN OTHERS THEN l_sqlerrm := SQLERRM; INSERT INTO ctrl.ctrl_typ (ctrl_id, ctrl_typ, ctrl_sum, ctrl_detail, ctrl
-
How to put colours for a column in ALV
Dear All, I need to put green colour for 1 column in an ALV report. Can anybody tell me how we can do that ... Thanking you in advance, Shankar
-
Window doesnt recognized my ipod nano
Window doesn't recognized my ipod nano, and i cannot turn my nano on,,Is there any way to fix it??
-
Password protect zip files-Terminal help
Hi. running OS 10.7.4 on my MacBook Pro. I want to password protect a zip file (FPTGH.zip) to send to both PC and Mac users. I created the zip file using the finder. That worked like a champ. The file is on my desktop. I opened Terminal and entered z
-
UOM Conversion changes where conversion is only used for reporting
I think this is a different situation than I've seen in other posts. We have a UOM conversion from CS to POUND (i.e. 1 case = 30 pounds), and at some point may want to change it so that 1 case = 28 pounds. In our situation, all transactions are done