I use FireFTP to upload files. This past week the profilesuddenly stopped connecting. Ideas?

I manage two Websites and use FireFTP to upload files for both of them due to FireFTP's ease of use. I've never had a problem connecting before last week. The files on the host (my computer) show, but there is no response when I click on the "Connect" button. These were already established profiles and have worked before, and I have made no changes. I've tried to make the connection fairly frequently over the past week (this has been going on for a full week now), and tried a few minutes ago to confirm there was still a problem. There is. Did I have only a limited time to use FireFTP? If so, I don't recall being advised of that when I downloaded and installed it. I'd gladly pay a nominal fee just to not have to learn another FTP app, although there are many free FTP apps available on the Internet. Further, Firefox itself is not working -- I can not see any Webpages using Firefox, although in using IE or Chrome, the Webpages I seek come up. In fact, I had to find your Website and fill out this support ticket via IE. What is going on with Firefox and FireFTP? Thx.

If Firefox won't connect, as well as FireFTP not connecting, the most common reason would be a firewall block after the update. That and other reasons are discussed in the following support articles:
* [[Fix problems connecting to websites after updating Firefox]]
* [[Firefox can't load websites but other browsers can]]
Anything there help?

Similar Messages

  • I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files.  For some reason, just this past week Image Capture will no longer save the file.  It scans, and the Scan Results window pops up, but it won't save file.

    I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files.  For some reason, just this past week, Image Capture will no longer save the file.  It scans, and the Scan Results window pops up, but it won't save file.
    The file name has no special character in it, just letters and no spaces.
    I have done this in the past and it has worked, but now it will not.
    I have not upgraded any software, that I am aware of.
    After scanning, the Image Capture pops up the Scan Results with the file name in the window, but neither the Scan Results nor the Image Capture window responds to inputs.  The Image Capture window is frozen, with only the "Overview" and "Cancel" buttons active (but non-responsive).
    Is this a software issue or a scanner hardware issue?  I am using a HP Photosmart C6200 series printer/scanner on a network using a Time Capsule airport.
    Thanks.

    I had the same problem.
    Got a 90% fix.  Apparently the Mavericks preferences won't work with Yosemite, so I just deleted the Image Capture preferences.
    Unfortunately, the "Scan to" folder seems to be permanently set to the Pictures folder.
    1.  Quit Image Capture
    2.  Go to Finder > Go > Home, which opens up your home folder (named after your user name)
    3.  Open Library > Preferences > com.apple.ImageCapture.plist - Drag this file to the Trash
    4.  Start "Image Capture", click "Details" and change all your settings as you prefer
    5.  Quit and restart "Image Capture".   Notice it remembers all your settings except "Scan to" folder.  It insists on saving to "Pictures".
    That's as far as I was successful.  I tried changing the "Scan to" folder to "Desktop", but on launch, Image Capture always sets it back to "Pictures".
    This is what I tried:
    6.  Download and install "Pref Setter" from http://www.nightproductions.net/prefsetter.html
    7.  Quit "Image Capture".  Right-click on "com.apple.ImageCapture.plist" and open with Pref Setter.
    8.  Search for "Pictures", which finds "~/Pictures" (the tilde character at the start means your home directory).
    9.  Double-click on "~/Pictures" and change it to the folder you prefer.  I like "~/Desktop"
    10. Choose File > Save then Quit from Pref Setter.  Note that re-opening the plist file still shows "~/Desktop"
    11. Start up "Image Capture" -- on startup, "Image Capture" sets "Scan to" folder to "Pictures"
    I consider this a bug.

  • I am using iPhone 5s ,I paid $188 ,but I can't use PDF to work file this function ,it is sucks app

    I am using iPhone 5s ,I paid $188 ,but I can't use PDF to work file this function ,it is sucks app.i will complain apple of you app

    iUploader app
    "The iUploader app is the only way I know of to load files such as resumes and cover letters to sites such as Monster and CareerBuilder (those having the "Browse for File" links intended for desktop use) from an iOS device. If there is another way to do it, then I'm just not aware of it. I asked for this on the Apple discussion forum months ago and now here it is! Thank you app devs for this!" https://itunes.apple.com/us/app/iuploader-free-uploads-downloads/id541315293?mt= 8

  • I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only with wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

    I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only to wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

    Trust me when I say this coming from 20 years of experience.
    Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
    Download and install Carbon Copy Cloner, clone internal drive to external drive.
    Set a schedule to remind you to do it at least once a week, keep it near your charger.
    When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
    CCC will do the rest.
    If you want to boot from it, hold the option/alt and select it Startup Manager.
    I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
    It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
    Make as many clones as you want, keep them time seperated, off site etc. etc.
    Cables don't have network issues, clones can be verified in seconds merely by booting from them.
    Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
    Software problem? No sweat, boot of the clone and reverse clone your problems away.
    If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
    I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
    Most commonly used backup methods

  • I've had my Mac since Feb, just this past week when I turn it on, the apple symbol shows and the loading icon appears, and that's all it does for hours and it never starts up.

    Hello,
    I have had my MacBook Pro since February/March of this year. It has been working fine, up until this past week.
    It froze on me one day, and I couldn't not do a force quit or anything so my only option was to hold the power button until it shut off.
    It then reboots and it stays on the apple load up screen for hours. I then read the manual and tried the disk utility and it couldn't verify or repair my disk until after the sixth try.
    Once I did repair it, I rebooted and once again I had the start up screen for like a day, until I just finally resulted in an erase install.
    The erase install failed the first two times, and finally worked the third. My computer was doing fine for a day, I was reinstalling apps that came with the Applications disk.
    Upon using software update to get the latest Snow Leopard Update 10.6.8 that is used to prepare for the Lion OS X Update, it downloaded, but after about two hours, the install failed, and none of the updates installed.
    It told me to restart, and once I restarted my computer yesterday evening, it is STILL currently sitting at the apple load up screen. STILL.
    I do have the Apple Care for four years, and I was trying to see what all could happen before I have to ship it off. I am a college student, and this resulted in me losing all my papers, work, and things that I've done so far, because I was unable to back up files.
    I thought buying a Mac was a great choice because things like this usually don't happen! But I guess not!
    Can anyone PLEASE help find a solution to this?

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly

    My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate

    If the thief enabled activation lock on the device, then there is nothing that can be done.  Only the password for the Apple ID that it is locked with can disable activation lock.

  • I am unable to connect to my home wifi, i was fine in a hotel this past week with the wifi

    Question I am unable to connect to my home wifi, I was fine in a hotel this past week with their wifi, I am not that technical and need help also how do I find my operating system info??

    Go to settings, general, about, and you will see "version." That will indicate what your operating system is such as 5.0.1 which is the most recent upgrade.
    As for the wifi, you might try going to settings, then general, then at the bottom reset, then click on reset network settings. Back out of everything and then when you log back onto your wifi it will ask you for your local password (assuming you gave it one when your router was set up). Enter it and you should be good for go.  At least this worked for me.
    Good luck.

  • My macbook air has gotten slow this past week i have changed browsers and the beach ball keeps coming up all the time and on a game i play it says the network is slow can anyone help me?

    my macbook air has gotten slow this past week i have changed browsers and the beach ball keeps coming up all the time and on a game i play it says the network is slow can anyone help me

    Go step by step and test.
    Restart the router. Restart the computer.
    OS X 10.7 Lion / 10.8. Mountain Lion
    http://support.apple.com/kb/PH3915
    Start up in Safe Mode.
    http://support.apple.com/kb/PH4373
    Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836?viewlocale=en_US
    Reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Increase Disk Space
    http://support.apple.com/kb/PH10677?viewlocale=en_US
    Best.

  • Unplug stopped working this past week so I downloaded 2.052 like suggested and still not working.

    Have enjoyed Unplug and all of a sudden this past week it stopped working completely, not only on YouTube but Vimeo too. Updated like suggested but still not working.

    Please contact the developer by email at [email protected] as this is an add-on and not a Firefox issue.

  • I just bought two new songs this past week....

    I just bought two new songs this past week, and now they're missing from my iphone and my computer library.  I went to purchase one of the songs from Itunes store again - and it actually downloaded, not recognizing that I had bought it before!  What happened?  And I'm totally going to get charged for the one song, and I don't even have the other now
    Please help!

    https://discussions.apple.com/message/19943090#19943090
    there's a chance that iTunes deleted the song. Don't worry, you're not the only one with this problem. Other problems may include, but are not limited to missing album artwork, missing albums, incomplete albums, duplicates, and other exasperating shenanigans.

  • HT201210 Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?

    Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?

    Restore the iPhone when connected to iTunes by cable.
    Still the same TS1275?
    Is your iPhone jailbroken?
    Or
    Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone?

  • When bad file is created then the process stops

    hi all,
    through interface while we transfer data to a table , if the bad file is created, then the process stops .we want to execute further with all the correct data records excluding records which are in bad file, is it possible ? if yes then how. Because out of 10,000 records if one record is errorneous why the process will stop.
    I checked LKM and found the jython script where it checks the return code <> 0 can I do something there to meet our requirements.
    regards,
    Palash

    Hi,
    You can do this by implementing error checking in the tool, so that only the bad records will be moved into E$ table and remaining records will insert into the target tables. I hope this will meet your requirements.
    Thanks,
    Saravanan Rajavel

  • Safari could not open this page because the server stopped responding

    Since upgrading to 4.2 I get this message a lot even though the page loads anyway:
    "safari could not open this page because the server stopped responding"

    Have you Checked your firewall setting(of both windows and of the Anti Virus).
    I was Having the same Problem, and tried everything from the Internet, then i realised that firewall can mess things up and so i immediately TURNED OFF the firewall and restarted my Network and my Ipod ....THE INTERNET WORKED
    i am using win vista and McAfee.
    want to add few more things:
    1> adjusting brightness has nothing to do with Networking.
    2> Multiplayer/online games also get into problem due to antivirus firewall(AVG anitvirus specially.....Disabling firewall or setting it to permit the Device/program to access Internet WORKS)
    3>to know if the problem is with the Idevice or with the System, try connecting other devices to that netwrk, if non of them connect then its the problem with the System/Network/OS and not with the Device........Resetting you Idevice again and again will not Solve the problem.
    Happy Idevicing

  • After downloading InCopy I click on the downloaded file to install, but the process stops when trying to connect with server and doesn't carry on.

    After downloading InCopy I click on the downloaded file to install, but the process stops when trying to connect with server and doesn't carry on. Can you please help?
    Thanks,

    Agathe.texier which copy of InCopy are you downloading and installing?  Do you receive any specific error messages?  Finally what operating system are you using?

  • I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    Put your phone in DFU mode,
    Hold the Power Button (3 secs)
    Continue holding the power button and also hold the home button (15 secs)
    Release the power button while continuing to hold the home button (10 secs)
    Your device should prompt with the "Connect to iTunes Screen"
    Restore.

Maybe you are looking for