I use Go Daddy mail for work, and I can no longer receive mail to Apple Mail, no matter what I try. Help?
My work uses Go Daddy for our mail server at work. Up until 2 weeks ago, it was connected to Apple Mail using IMAP just fine. Then I stopped being able to receive mail to Apple mail or my phone. Completely. I've tried deleting the account and re installing, with SSL and without, different ports, everything. It just won't sync, and I can't receive mail whatsoever. It's tedious going through the browser at work, and even more not being able to get emails to my phone. I've even tried sending mail, and it shows like it's sending, then does not send. It happened out of the blue. Can someone help?
I tried something similar by adding a new mail account doing the apple id etc but it worked in that it would look for mail but no mail would come even though mail still goes to my phone I was loath to delete my original account just in case the new one did not work as well. So I guess I am a little stuck now.. I hope you can help me to sort it out.
Thanks
Similar Messages
-
I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
Safari is apparently frozen. I can no longer receive or send e-mail on Safari, nor search using Bing. When URL's are typed in and entered, there is no response. Obviously, I can still use Firefox for these needs, but how do I get Safari back to work?
I have the same issue - it worked once, then the error pop-ups keep coming asking for the same darn password I gave it and saved 100 times before. Anyone else find a solution? I use my earthlink for outgoing and that works but would rather use godaddy since I pay for it.
-
I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?
Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.
-
I can no longer send from my apple mail since icloud.
I have made a mess of things. I can no longer send from my apple mail since icloud. My outgoing mail remains offline no matter how I reconfigure it.
How do you check your tls certificate? Is is me.com or mac.com?
I am so frustrated.Hi philo f,
If you are having an issue with printing from your iPad mini, I would suggest that you troubleshoot using the steps in this article -
About AirPrint
Thanks for using Apple Support Communities.
Best,
Brett L -
After installing the latest update to itunes, and my ipod, I can no longer sync my computer and my ipod nomatter what I do. I have tried everything I know and can read. I am beginning to think it has something to do with the password that I changed, but I tried to change it back and nothing happens. Does anybody have any suggestions. I have been working on this for three hours and I can't figure it out? Apple is no help and it was their updates that messed the whole thing up.
Kathy295http://kb.mozillazine.org/New_messages_do_not_appear
-
HT3843 I install the Genius for Apps and I can no longer access the Apps Store on my I phone
I installed the Genius for Apps on my new IPhone 5 and I can no longer access the App Store and when I tap App Store I just get a white screen with the heading Genius for Apps with a white screen and no active keys.
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
Not sure how long ago...a few weeks...I thought it was a problem with bell provider so went there first.
They did diagnostics and recommended I contact you since I can obtain my e-mail through other browsers. I can access internet without difficulty but when I sign into e-mail account through hotmail my e-mail page is jumbled and looks skeletal. I cannot access any of the messages as if I press on any one it does not come up. I have taken a screen print but I do not know how to import it here. I imagine it is some interaction between your browser and my computer but I am clueless as to how or where to start....
Doris S. BauerMany site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
As I already said after I upgraded firefox I can no longer add attachments, photos etc. from my hotmail account.
Welcome to the Apple community.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
My friends sent to me gift card, but I have vaited for hours and gifts didn't come to me. What happened, why they didn't come ?
<Edited by Host>We are fellow users here on these forums, you're not talking to iTunes Support - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
You've checked the spam folder on your email account as well as the inbox ? They could also try resending it (and they should double-check the email address) : http://support.apple.com/kb/HT1541
If you still don't get it then they should contact iTunes Support. -
Suddenly can no longer receive Yahoo IMAP in Mail
I have suddenly become unable to receive Yahoo IMAP mail in my Mail client in Yosemite on my MacBook Pro (13" Early 2011).
I can send mail, but not receive it. I suspect a problem on the Apple/OS X side, because my iOS devices are still receiving Yahoo IMAP mail.
I tried deleting and re-adding my Yahoo account. Now, not only can't I receive mail, I can't see any mail in my Inbox! Yet, I can see all my Yahoo folders and their contents while using Mail.Hello Paul,
Thank you for participating in the Apple Support Communities.
It does seem like you're encountering an issue with email that's isolated to your Yahoo IMAP account in Mac OS X.
For a situation like this, start with the troubleshooting tips in the section of this article called "Mail Connection Doctor shows one or more red dots in the account Status column:"
OS X Mail: Troubleshooting sending and receiving email messages
This article contains a variety of steps that can help resolve an issue like the one you're seeing.
All the best,
Jeremy -
Can no longer access Gmail from Apple Mail in OS 10.7.5
Apple Mail stopped playing nice with my Gmail account.
I have IMAP enabled. All accounts are online. But there's no communication between Mail and Gmail. Whenever I try to update my mail, I get the following error message:
The server returned the error: The connection to the server “imap.gmail.com” on port 993 timed out.
Incoming mail server: imap.gmail.com
Outgoing mail server (SMTP): gmail
It's almost as if Apple Mail thinks I'm offline.
What can I do?Double-click anywhere in the line of text below on this page to select it, then copy it to the Clipboard (command-C):
imap.gmail.com
Launch the Network Utility application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Network Utility in the icon grid.
Step 1
Select the Lookup tab and paste into the address field (command-V). Press return. Post the output that appears below – the text, please, not a screenshot.
Step 2
Select the Ping tab and do the same. Please enter the same input as you did in Step 1. Don't use the output of Step 1 as input to Step 2.
Important Note
Some web browsers and mail clients will automatically convert a domain name such as "www.example.com" to a clickable URL, such as http://www.example.com. That will interfere with the test. If necessary, edit the input in the Network Utility window to remove any added characters. -
I have 2 iPhones, a new 5c and 4s. I use them both but only have one associated with my iTunes account. Can I use the account for both of my phones? If so can I set my account to only sync certain things on each phone? For instance, my new iPhone 5c I want to back up, my old iPhone 4s I don't, I just want to be able to access my music when I'm using it.
Yes, both can be on the same Apple ID.
-
I'm on 3 as pay as you go and bought an all in one 15 so i get unlimited data for 1 month, but for somereason my internet has stopped working asnd i still have 3 weeks left of data? My iphone no longer show the personal hot spot button too and when i select it from mobile data it is forever loading and does not work >
Contact the carrier and ask them what is going on.
-
I have checked all of the things E-mail troubleshooting has told me...It simply isn't working on my computer as a result of putting my e-mails on my Iphone...I'd like to know how to receive the e-mails in both places, whether I open them or not, and also how to send from both places (whichever I'd like) Please help!!
Email provider is?
POP3 or IMAP?
If POP3, is email configured to remain on the server?
You need to provide more info.
Maybe you are looking for
-
No Jabber client for Windows Phone 8.1
Can you advise on when a Jabber client for Windows Phone 8.1 will be released?
-
Sorry. Credit Cards are not allowed at this store....
So, I have a US based credit card and I'm located in the US. All of my account info is updated with my latest address and credit card info. I can't seem to purchase anything in the store with a credit card. When I click on buy it brings up the mess
-
Is Windows XP supported, and by which versions of NI-DAQ and LabVIEW?
Which versions of NI-DAQ, LabVIEW, and LabVIEW Run-Time run under Windows XP?
-
DECISION in Process Chain - TK 102
Hi there, I did create a Decision in DEV which does work perfectly. The Issue is even the Object Type RSPV is set to "Everything Changeable", I can not change the Formula. I get the message TK102 The system administrator has set the system status t
-
About starting the debugger in a modal screen
Hi, I've tried the way provided in ABAP FAQs, which is to create a txt file with the following line: [FUNCTION] Command=/H Title=Debugger Type=SystemCommand And then drag and drop it to the modal screen. How come it doesn't work for me. It just goes