I use incredimail for my email and can not get it to work with foxfire for sending links etc

i will try to email a link and at first it went to outlook but i use incredimail so i need to know how to make it launch incredimail
== This happened ==
Not sure how often
== everytime i try to send a link

See this KB article.
[http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox]

Similar Messages

  • HT4108 I have a hdmi connector and can not get a picture to come on my tv. Need help also bought the RCA cables and can not get it to work with my iPhone 4 g

    I have a hdmi dock connector and can not get  it to show on my tv. It's a iPhone 4g please help also have a RCA cable to and can not get it to work either

    With what apps?  Not all apps require video output.

  • I have Nortons security suite under the old version the Idenity protection worked I kept all my passwords under this which used a master pasword I did not save passwords any were else and now can not get it to work supplying passwords for my l0gon site.

    I have Norton's security suite under the old version the Idenity protection worked. I kept all my passwords under this which used a master pasword I did not save my passwords any were else and now can not get it to work supplying passwords for my logon site.

    Symantec need to correct a mistake they made with their add-ons. They originally updated their add-ons after quite a delay to work with Firefox 4.0 as shown here - http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894
    They made an error with the update in only listing it as compatible with Firefox 4.0, so they will not install on Firefox 4.0.1 and subsequent Firefox security updates. Symantec have indicated they will be releasing an update to correct their error soon, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788/page/12

  • I use a 10.8 system and can not get Terminal or Textmate to accept a password. I actually can't type it when prompted. Any ideas?

    I use a 10.8 system and can not get Terminal or Textmate to accept my password by that I mean, neither will even allow me to TYPE it in.
    I need this to edit hosts files. I've used Macs for years but am not that wise on the inner workings. HELP!?

    If you type a password into Terminal it will not appear on the screen at all, just enter it and press return.

  • HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

  • I just bought the BDP-S1500 yesterday and can not get it to work via wireless

    I just bought the BDP-S1500 yesterday and can not get it to work via wireless????

    Hi BigDaddy317,
    Please the link below for further assistance in connecting your wireless device to the internet.
    https://us.en.kb.sony.com/app/answers/detail/a_id/33377/p/47329,47564,95482/c/65,66/kw/internet
    https://us.en.kb.sony.com/app/answers/detail/a_id/35983/p/47329%2C47564%2C95482/c/65%2C66/kw/internet
    Please let us know if you're getting the same result or the error messages that you see.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • I can not get website to work with ShockWave

    I don't know where to post this, but I need some help with it.
    Back in 1997 I was using Director, which I no longer have. At that time I created a website that contained some interactive pages where I had used Director to create content the required using Shockwave.
    I now have a MBP running system 10.6.2. I tried to open the pages in Safari and I get a dialog box telling me:
    "Some content on the page can’t be shown because its MIME type is unspecified."
    I downloaded Shockwave and Flash from Adobe, I restated my computer and still get the same message. I am not sure if ShockWave works with 10.6.2 or not.
    I am wanting to get the content of the pages so that I can use them on something else. If I could open the interactive pages I might be able to copy and past them off the webpages. Or if I could open the files with some other program then I could recover the content. Recovering the content is my goal, not running the interactive files online.
    Anyone have a suggestion?

    HI,
    It's possible (more like probable) the software you used to create the site isn't compatible with the latest version of Flash. I'm pretty sure why you are getting this... "Some content on the page can’t be shown because its MIME type is unspecified."
    Go to the Adobe Director support area here...
    http://www.adobe.com/products/director/
    You can ask their customer service for suggestions so you can extract the data from your site.
    Carolyn

  • IPhone 4 quit vibrating n can not get it to work with ibrate

    Can any one help me my iPhone 4 quit vibrating n I can't get to work

    Hey Little poignant,
    Thanks for the question. I understand that your iPhone 4 is no longer vibrating, let's double check the settings to make sure everything is configured properly.
    Settings > Sounds > Vibrate on Ring (Make sure this is ON)
    Settings > Sounds > Vibrate on Silent (Make sure this is ON)
    Settings > Sounds > Ringtone > Vibration (Make sure this is not set to "None")
    If the above settings are configured properly, we'll need to isolate this issue further. I recommend restoring your iPhone as outlined in this article:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • I recently purchased U2 Any DVD Ripper on Mac App Store and can not get it to work!  Help!!

    I can not find any documentation on how to use this software.  I can not figure out how to get it to copy a DVD to Mp4 format on my media hard drive, allowing me to watch the video on my apple tv.  Please help or direct me to get a refund for this $14.99 purchase. 

    Did you reset your PRAM?
    command-option- p-r
    Hold down all four keys as the mac starts up and wait for the chimes to ring twice. Then let the machine start up as usual.
    If it works be sure to check your date and time settings (the system will tell you)
    You can also start up from your system disk holding down the c key as it starts-- go past the language screen and open disk utilities from the menu bar run disk repair and then repair permissions. Set your startup disk to your new drive.
    Hopefully that will take care of the problem.

  • I've installed firefox 7 and can't get it to work with 1password

    One of your techs said 1Password would work with Firefox 7. I can't make it work

    Hi SusieQ,
    Seems they have no idea what they're doing over there, to wit...
    Mac Snow Leopard and above*
    In general, we recommend a multi-core processor and at least 2 GB RAM.
    Connection to the Internet is required; Smilebox is optimized for a high-speed broadband connection, and that faster connection will give you the best performance.
    Smilebox uses your Internet browser and Flash11 (or higher) to run. We automatically detect whether Flash is installed and will help you install the free download if need be. You will also need javascript enabled. Your internet browser and any security software (firewall, antivirus) you have on your computer may need to be configured to "allow" Smilebox internet access. Please refer our article on - I have security software (firewall or anti-virus software) that I suspect is blocking Smilebox.  What can I do to fix that?
    If your computer shipped with Windows XP, Windows Vista, Windows 7 and Windows 8 you can install run Smilebox; we do require that Windows XP computers have Service Pack 3 installed.
    To run Smilebox on your Mac, your Macintosh should have an Intel or Power PC processor on a G5 or higher (if your Mac was made in the past 3 years, it should meet this requirement), 2GB or more RAM.
    *Smilebox will not run on earlier versions of the Mac OS X including Leopard (10.5).
    Snow Leopard is 10.6.x, no G3/G4/G5 PPC Mac can run 10.6 or above.
    So this line is wrong, or two other lines about Snow Leopard are wrong....
    To run Smilebox on your Mac, your Macintosh should have an Intel or Power PC processor on a G5 or higher
    https://smilebox.zendesk.com/entries/23872226-What-are-the-system-requirements-t o-run-Smilebox-

  • Artist spent alot and can not get anything to work

    I thought it would be strait forward; but it is more like a backwards tango!
    OK, I can't get the media once down loaded from my cam to load into final cut.
    I have a JVC GZ-HD7U that records in Mpeg2 and when I down load from the cam to my desk it reads Mov00?.TOD. When I import this to Final it reads " unknown file format ( I may be off on the wordage;I am bit madddd at the moment)
    Maybe there is some one out there using the same set up as me? What would be cool, is you have a easy answer.
    My new MacBookpro has Quicktime and Jvc I did their thing to this plus Final cut offered a down load of it. You would think after all this and how much I have spent I could take over the world with this program; but oh no, I even tried ctrl clicking the media I downloaded in Quicktime (the only place I could view it but do nothing with it) and saved it as a QT movie.
    Then after converting it to quick time media; but no where near the 3.6 GB I downloaded, Did it load into final cut. Then once there no image, nothing, zip, nota, ssooooo confused.!!!
    I have watched the dvd tutorial and read the pdf etc. Still lost
    If any one can help or direct me in there right direction, I would be relatively thank for a long time!!
    Why doesn't final cut load and read TOD or work with QT from it. What a waist. I am not any where near Rich and could return this all now due to the way I feel and i am in my 30 day period with it all.....a darn shame
    Help

    Unfortunately, Ian is correct. Your options at this point are
    1) return the camera for a tape-based one (best option if you can)
    2) search the discussions at length to see if anyone else has found a workaround
    3) buy iLife 08 and use iMovie to import your clips, then transfer them from iMovie to FCE. iMovie 08 has the ability to capture off card-based cameras.

  • HT4356 I have a Kodak printer hero 9.1 and can't get it to work with my I pad is there a way

    Hello I can't get my iPad to work with the Kodak hero 9.1 does anyone have any suggestions thanks

    iOS devices can only print directly to AirPrint printers.
    To print directly from an iPad / iPhone you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or AirPrintActivator (donation - supported). The Mac must be "on" but may be asleep for them to work. Equivalent PC options exist but you're on your own finding them.
    You can also buy this standalone print server:
    http://www.lantronix.com/it-management/xprintserver/xprintserver.html
    These options enable you to use any printer available to your Mac, even older ones that may predate AirPrint by decades. Otherwise you will need to buy an AirPrint printer or multifunction device.

  • Just bought Apple TV and could not get it to work with my iTunes.

    iTunes can't find Apple TV. Tried reinstalling iTunes and even went disconnect ATV, router and modem...restarted my Mac pro. Still did not work! Changed my router channel and checked my config as well....
    ATV is able to work with the trailers and radio including UTUBE. What is wrong with iTunes?

    You might have more luck asking in the Apple TV forum http://discussions.apple.com/forum.jspa?forumID=1185

  • I just got my printer to day and can not get it to work please help p.s. email nsdolan@comcas

    THIS IS A HP DESKJET 3050A ALL-IN-ONE J611 SERIES

    Hi NEDJDOLAN4,
    What functionality is not working for your Deskjet 3050A:
    -Printing from the computer?
    -Printing from a mobile device?
    -Scanning to a device?
    -Copying by stand-alone?
    -Sending an ePrint job?
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Bought used ipo touch 5th gen but can't get it to work with my library

    hi bought used 5th gen ipod touch on ebay but it doesn't show in my library when i connect it all i get on the ipod is a message saying do you trust this computer when i prees yes nothing happens.

    Is your account listed in Settings>iCloud? If not y ohave to first delete the iCloud account from the iPod by going to the bottom of the screen. You have to enter the password for the listed ID. That is part of the Activation Lock
    iCloud: Find My iPhone Activation Lock in iOS 7
    Withou that or without getting the previous owner to remove the device from their account
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    The iPod is not usable to you. If you can get either of the above two thnks done. restore the iPPod via iTunes and set it up with your account
    iTunes: Restoring iOS software

Maybe you are looking for