I use Incredimail how to add a email icon

1. I use Incredimail as my mail server
Yahoo as my homepage
and just switched from IE 9 to Firefox
I love it, except, where is the email icon on my toolbar?
2. I also have a business website, www.LaCanadaPetSitting.com and for some reason not all my testimonials show using Firefox, why is that?

Wynnefield wrote:
I have several rules moving targeted emails into specific folders; however, this does not accomplish the task I am attempting to perform. The "control-click" only works on unopened emails, and I prefer not to close the email to have to move it.
This question is really two-fold:
1) Can I place an icon on the toolbar if that icon is not an available choice in the "Customize Toolbar" selection from control-clicking on the toolbar? or can I add an icon to the available choices?
I'm quite sure that the answer is no. as i said if it's possible it would require hacking Mail and you'd have to ask in the Developers forum (it's under OS X technologies) about that.
2) Is there a way to configure Mail so when I Delete or Move an open email, instead of the email just disappearing, the "next" or "previous" email in the Inbox would open in its place?
no.
Message was edited by: V.K.

Similar Messages

  • How to add program documentation icon on selection screen

    Hi All,
    Please let me know how to add  program documentation icon on selection screen.
    Thanks
    Jog

    THis is pretty straight forward, in se38, enter program name, click change.  Now click Go To, Documentation.  Enter the documentation on this screen, save and activate, now run the program,  the icon will be there.
    REgards,
    Rich Heilman

  • How to add new email id in sumbit event

    Hi all ,I am using Adobe life cycel designer ES2.Currently we are using a pdf form for getting hiring information .
    The need is while clicking the submit button of the form i would like to send the attached pdf form to two new mail ids.
    Am using this syntax to send to one person
    this.resolveNode("#event").submit.target
    = mailto:[email protected]?subject= Smart Form Hires (for Action Reason NHR)&body=NOTE TO HR: \n Please do not change the Subject line \n Remember to also attach Employee Data Form for a New Hire transaction;
    How to modify to add another email id?
    kindly help me,Thanks in advance.vidhya.

    Welcome to the Apple Community.
    Firstly, you need to change your details with Apple,  Start here, change your country if necessary and go to manage your account.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)

  • Using JSP, how to add new items to Fuego Business Object "Group" ?

    Given the classic Fuego Business Object (FBO) example of an Order, which has a few attributes (orderNumber, customerName, Order Date) and a GROUP attribute called OrderItems (ItemName, ItemPrice, etc.), I want to use a JSP to allow user to submit order. My JSP has a form and uses the Fuego Tag Library. There are FORM INPUT elements for Order.orderNumber, Order.customerName, Order.OrderDate, and a table using dynamic HTML to add rows and INPUT elements for new items to add to the GROUP attribute OrderItems - ItemName, ItemPrice, etc.)
    But when the user wants to add "OrderItems" to the order, I don't know how to get Fuego to create OrderItem Objects to add to the array (aka GROUP).
    Thx in advance.

    ###### below is the response I response I received from a BEA Engineer. From looking at the html source of fuego presentations that implement desired functionality, it appears as though they handle it using the first suggested workaround below ######
    Hi,
    The short answer to your question is that there is no out of the box feature to support directly what you are asking for.
    The problem is that JSPs receives a Fuego Object that is accessed at rendering time (JSP compilation/ HTML rendering). And then all the updated values are sent back to the engine in a new request when you hit the submit button of a FOR tag that has the postResult tag in the action attribute. At this point all these values are automatically taken from the request and the Fuego Object instance variable in the screenflow is updated.
    After saying this you will notice that it doesn’t make sense to update the Fuego Object instance on the JSP. Because you only could do this ate rendering time and because this instance is not going back to the engine (just the values).
    Fuego Object tag Library was designed basically to be able to show Fuego Object data and invoke runs-on-server FO methods.
    I see 3 different approaches to solve the problem you have:
    1)Use JavaScript to call a runs-on-server method that recive the required arguments to extend the group and set the values. You should use the new tag called invokeUrl that allows you to use AjaX, in this way you could update the page with partial rendering.
    2)Use JavaScritp to submit the form when the user click the add row button. And have a loop in the Screenflow with an automatic activity that will extend the group and the go back to the component activity that now will show the page again but with one more row. The drawback is that each time the user wants to add a row, it will require the entire page to be refresh.
    3)Handle the table and values using JavaScritp and DHTML, and put all the new values in the request (input element), then in the Screenflow use an automatic activity to set this values to the Fuego Object.
    Look at the Samples of using Fuego Tag Lib and AJaX
    albpm5.7\studio\samples\Integration\Portlets\PFoodDelivery.fpr
    albpm5.7\studio\samples\Integration\ThirdParty\AJaX.fpr

  • How to add bt emails to iphone

    how do i add bt emails to my i phone 4 s on o2

    It's easy, though Apple says it's not a user-installable part.
    The appropriate hardware is available for about $90, the antenna cables are in place. The card just plugs into a connector on the logic board.
    Note: the Airport Extreme kits at Apple Stores are not correct for this, the correct kit is specifically for dual-core PowerMacs.
    Part number for the correct kit is MA252G/A, search the web for sources.

  • How to add multiple email id

    Hi All,
    I am using Adobe interactive forms for offline scenario ..
    How can I use the submit button for sending email to multiple users dynamically ..
    Regards,
    Naval Bhatt

    Hi Naval Bhatt,
    Can you explain me the process to send email to multiple users dynamically as you know the solution.
    Appreciate your help!
    Thanks,
    Krishna.

  • How to add iCloud email address

    Can't find any info on how to add another icloud email address.
    Any help out there?

    You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
    More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

  • How to add an email address to an existing contact?

    Can someone explain how this is done (without having to email someone first. You should just be able to add an email address to a contact, yet I have not seen or found a way.
    Please help.

    Thank you nitekram for providing a helpful troubleshooting tip.  
    For future reference, you can view your user manual online to quickly search the steps on actions you would like to perform. Since each device can have a different series of steps to follow, please go to the link below to locate your device's guide:
    www.verizonwireless.com/phoneguides
    Thank you!
    KellyW@VZWSupport

  • How to add an email account to the inbox

    HHow to add an email account to inbox on an ipad

    If you want to add a new email account you do that in the settings - Mail, Contacts, Calendars>Add account
    If you want to add new mailboxes or folders to an existing account - you must have an IMAP email account in order to do that. When you are in the mail app - go to the window that shows your inbox, sent and trash folders. If there is an Edit button at the top - tap that to add another mailbox.
    If you do not see that edit button - you did not have an IMAP account and you cannot add additional folders or mailboxes.

  • How to Add Checkbox and icon in ALVGRID

    Hi Experts,
      i have one Requirement. i need to add Checkbox, Selectall,icon(Unlock or inactive) infront of Contracts of ALV GRID.How to achive that.
    Thanks,
    Venkat.

    Hi
    For check box
    At declaring field catalog using structure LVC_S_FCAT
    mark CHECKBOX = 'X' and also EDIT = 'X'.
    For reference check below subroutine in program BCALV_EDIT_05.
    form build_fieldcat changing pt_fieldcat type lvc_t_fcat.
    data ls_fcat type lvc_s_fcat.
    call function 'LVC_FIELDCATALOG_MERGE'
    exporting
    i_structure_name = 'SFLIGHT'
    changing
    ct_fieldcat = pt_fieldcat.
    *§A2.Add an entry for the checkbox in the fieldcatalog
    clear ls_fcat.
    ls_fcat-fieldname = 'CHECKBOX'.
    * Essential: declare field as checkbox and
    * mark it as editable field:
    ls_fcat-checkbox = 'X'.
    ls_fcat-edit = 'X'.
    * do not forget to provide texts for this extra field
    ls_fcat-coltext = text-f01.
    ls_fcat-tooltip = text-f02.
    ls_fcat-seltext = text-f03.
    * optional: set column width
    ls_fcat-outputlen = 10.
    append ls_fcat to pt_fieldcat.
    endform.
    For Icon:
    CONSTANTS:
         icon_id_failure            LIKE icon-id   VALUE ' ((Content component not found.)) @',
         icon_id_okay              LIKE icon-id   VALUE ' ((Content component not found.)) @'.
    TYPES: BEGIN OF ls_tab,
           matnr LIKE equi-matnr,
           maktx LIKE makt-maktx,
           b_werk  LIKE equi-werk,
           b_lager LIKE equi-lager,
           lgobe LIKE t001l-lgobe,
           sernr LIKE equi-sernr,
           icon LIKE icon-id,
           objnr LIKE equi-objnr,
          END OF   ls_tab.
    *Table that display the data for the ALV.
    DATA: itab  TYPE ls_tab OCCURS 0 WITH HEADER LINE.
        PERFORM get_h_date .
        IF h_date => sy-datum .
          itab-icon = icon_id_okay.
        ELSE .
          itab-icon = icon_id_failure.
         ENDIF.
    Regards
    Sudheer

  • How to add custom file icons on SharePoint 2010 document library?

    Hi there,
    In a document library SharePoint shows the PDF and Word etc icons all fine - however we have a custom file format with a custom icon. Is this possible to add this custom icon for our custom extension? How?
    Thank you so much.

    Hi,
    You could accomplish your requirement by using jQuery with these steps, and this code is using jQuery to modify it on the current page, if you would like to make it work on all library, you need to choose the former method or add this JQuery script on all
    library pages manually:
    Upload a custom icon to file “14\ Template\Images” or your SharePoint document library.
    Add this code below in the document library that you want to extend your custom icon, you could add code by following these: Click edit page in the document library -> add a web part -> choose Content Editor -> click edit source in the Ribbon ->
    add the source below -> click OK.
    <script src="https://code.jquery.com/jquery-1.11.1.min.js" type="text/javascript"></script><script type="text/javascript">
    $(document).ready(function(){
    var fileObject = $("[title$='docx']");
    for(var i=0; i < fileObject.length; i++){
    //fileObject[i].outerHTML="<img width=\"16\" height=\"16\" title=\"test.docx\" alt=\"test.docx\" src=\"/_layouts/15/images/custom.png\" border=\"0\">"; // upload your custom icon to file ” 14\ Template\Images”, replace your src URL
    fileObject[i].outerHTML="<img width=\"16\" height=\"16\" title=\"test.docx\" alt=\"test.docx\" src=\"/sites/sharepoint2013/Shared%20Documents/custom.png\" border=\"0\">"; // upload your custom icon to SharePoint document library, replace your src URL
    </script>
    The screenshot below is my result:
    Best Regards
    Vincent Han
    TechNet Community Support

  • Air iOS - How to add iPhone 6 icons to app.xml?

    I'm using Flash CS6 and Air 3.9 to publish an iOS app.
    How to add the icons for iPhone 6 and iPhone 6 Plus to the app.xml?
    I tried this but got an error:
    <icon>
    <!-- all other icon sizes -->
    <image120x120>AppIcons/app_120.png</image120x120>
    <image180x180>AppIcons/app_180.png</image180x180>
    </icon> 
    Any help appreciated.
    Thanks

    Hi,
    Thanks for reporting, but things are working fine at our end. Could you please tell us the error you are observing. Also i would recommend you to use latest SDK and Flash pro.
    Thanks,
    Jitender

  • Using TextEdit, how do I create the icon below?

    Using MacBook Pro's TextEdit, how do I create the icon below?
    Thank you for the information.
    John Freeman.
    [email protected]

    Drag the icon image right into the body of text edit.

  • How to add the window icon to task bar

    hai,
    i am display one window using jwindow.how can i place that in
    window(os)task bar.plz help me.
    thnks in advance.
    kishore

    Only JFrames in the taskbar. If you are using 1.4, you can use a JFrame and use setUndecorated(). It looks a lot like a JWindow.

  • How to add additional email using second domain name?

    BC is currently hosting wa-cs.com and we are using email address pointing to that domain. We added wolfeassociates.com domain name to the site and now want to setup emails with that domain name in addition to the wa-cs.com. This should be simple but the option to setup does not appear available.
    Is there a solution? Thanks, Greg

    Hi Greg,
    When you create an email account on the main domain, and alias will automatically be created on the second domain as well. So, when you create [email protected], the system will automatically create an [email protected]
    Email sent to either of the two addresses will end up in the same inbox.
    Cristinel

Maybe you are looking for