I use line out sound but the sound does not stay on when I start up
I use external speakers with my Mac Pro. However, since I upgraded to Yosemite (with latest upgrades), I have to use the desktop icon to turn on the sound every day. Alternately, I can uncheck the mute box in Preferences. Somehow, the mute button is set when I start up. How can I keep the mute button off?
How long do you wait for the display to come up? Can take several seconds during the boot process. Have you tried a safe mode start by holding the shift key down during startup?
Similar Messages
-
i have replaced the batteries and checked to make sure they are installed properly but the keyboard does not stay turned on
Hold the power key on the keyboard down for 5 secs to power off, tap the power button once to start. It should connect automatically.
-
Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?
Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao. -
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple -
the external GPS is used only for 911 but the device will not operate without it...this causes great inconvenience for me, having to run that cable to a window in the two houses I use it..is there a way to disable the GPS if I do not care about the 911 functionability..? this is the only downside I have with the network extender and it renders my device useless..
Nope, GPS is a Federal requirement for anything operating a cellular telephone signal. You don't ever plan to call 911 until you are in an emergency. I don't see that requirement changing any time soon.
If you are truly inconvenienced by the VZW network extender then perhaps you should disable you calling features in these areas and swap over to WiFi only. There are many services and apps out there that can route your phone services through internet service providers. -
In Adobe Acrobat X Standard, our user used to be able to resize drawings to 8.5 x 10, it stopped working yesterday. It allows her to do this without an error but the size does not change?
Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.
-
I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. What the heck... I did fine with the old iPhoto and "Shop elements 6... .
Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN -
My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]] -
i am unable to sync my movies in the i tunes 11 library i try to add the mp4 video by using the add to library option but the movie does not sync while the music is syncing fine...
I had the same issue. What I did was save the movies on a thrid-party app like Download Manager Lite. Once downloaded, go back to itunes, go to your iDevice, go to apps and transfer the app, then scroll down and click on the app and from there you can send the movies to that app and WILL play. Can only hold up to 8 videos/movies (this is for iPod Touch 3G or better, iPhone 3s or better, iPad requires iOS 4.3 or better)
YES THIS APP SUPPORTS .mp4
From other ipod (nano, classic): I don't remember.
If your just putting them on iTunes, it should show and play on iTunes no problem.
Message was edited by: keeferaf -
Hi, I'm trying to extract the nano sim tray on my new Ipad air. I know how it should come out but the tool does not seem to release the tray. Any ideas?
Thanks. It needed more pressure than I expected!
Didn't want to break it when it's less then 24 hours old!
BB -
I had an ipod touch 4th generation and used the Apple Universal Dock to play music through my stereo. I just got the 5th generation and the lightning adapter but the adapter does not fit into the dock. Apple tech support has no solution, does anyone?
That is the adapter I purchased from Apple which does not fit in the Apple Universal cradle (which apparently is no longer universal). However, I just created my own solution. The cradle holds the dock connector at a slight angle so the adapter, which has a straight bottom edge, will not slide down far enough to make a connection. Since the adapter has a plastic case, I used my Swiss Army knife to whittle it down to fit. It's a no-tech solution, and free!
-
I was trying to update my Security Questions this morning but got 'Timed Out' I've just tried again to get into my security settings but the system does not recognise the information I'm putting in. Can anyone tell me how I can correct this problem. I can still log-in.
Best wishesWelcome to the Apple Community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices) -
iTunes recognizes my device but the device does not show up for me to work with. Any idea where I go to access to device in iTunes. Going to File/Device is greyed out.
I think this article will help you.
-
New nano (7th generation) - music is loaded, nano is charged, volume setting are all on but the music does not play thru the earbuds, Checked with a different pair with same results...I'm sure I must have something not turned on that should be but not sure - help!
Hi deb253,
If you are having sound issues with your new iPod Nano, you may find the following article helpful (it is aimed at the 6th Gen, but the steps should be similar for the 7th):
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
Regards,
- Brenden -
My iPad Prefs are set for the side switch to Mute; but the speaker does not mute when the switch is moved down.
That setting only works for system sounds like push notifications (emails and the like), some game sounds, keyboard clicks and things like that. If you want to mute all sounds you still have to turn the volume all the way down with the volume switch.
Maybe you are looking for
-
Portal Runtime Error: Unable to parse template
Hi! I integrated SAP BW system with SAP Portal. All the connection tests (Sap Web AS connection, ITS connection, Connection Test for connectors) run successfully. I also installed a BI add on u201CBI Administratoru201D on Portal and performed all the
-
How to change colors in some Muse Widgets
Hi, After getting the perfect answer to my question about using new widgets from http://muse.adobe.com/widget-manager , I now have another one. Customizing the widgets has been extremely easy except of only one part I cannot figure out: changing the
-
Edge Animate file does not view properly in Firefox
Adobe Edge Animate 1.0 file does not view properly in Firefox (3.5.19)-figure gets cropped... but looks fine in Chrome and Safari. Here's a link to the file: http://127.0.0.1:54321/Users/breuter/Desktop/RD_Test%3AEdge/Flying_R_Man6.html?mode=previe
-
Tax amount also fetting posted in GR
Dear Experts, I have created a new pricing procedure,selected a tax code in PO 1000 basic price 100 BED 2 Ecess 1 HEcess 1103 Total Now when i go for GR this total 1103 is ge
-
Strange display behaviour inputfields on screens
Hi, I noticed strange behaviour with inputfields on screens. When a certain inputfield has a maximum length of 50 and a visible length of 50, it depends on the number of spaces whether the inputfield is fulled filled or not. When I have 50 characters