I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

Similar Messages

  • I'm having problem  with my icloud account,I don't have access to the email i once used to set up my icloud account,this is really affecting me,I can't backup and restore anything from my phone and device..anybody can help?

    I'm having problem  with my icloud account,I don't have access to the email i once used to set up my icloud account,this is really affecting me,I can't backup and restore anything from my phone and device..Can somebody help?

    Hi Maastricht2014,
    Until and unless you remember the password to your old email address, you will not be able to access the eBooks as those eBooks are only authorized with your old email address only.
    The only workaround or alternative to access your eBooks will be to contact the eBook vendor and ask them to migrate the eBook from your old email to the new one.
    Hope that Helps!
    ~ Arpit

  • I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

    I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.  

    Was it purchased from an official Apple Store, not a reseller?  Only Apple Stores sell official factory unlocked phones.  The others sell hacked to unlock phones, and the unlocking is unstable.
    Try these steps, as needed:
    1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
    2. Settings > General > Reset > Reset Network Settings.
    3. Replace SIM card (and reset network settings again)
    4. Restore Phone in iTunes using a backup
    5. Restore in iTunes as new, without using a backup

  • I am having problems with flash player it keeps crashing i have unistalled it then reinstalled it bu

    i am having problems with flash player it keeps crashing i have unistalled it then reistalled it and it still keeps crashing i use firefox as my web browser can anyone help me thanks

    Hello,
    The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
    Texas Mac Man's Flash hack/post...
    https://discussions.apple.com/thread/3599648?tstart=0
    Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
    Might be later ones around also... saw 11.3 I think.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    You should also consider the Shockwave Player, which displays Web content that has been created by Adobe Director, much used for multimedia: For PPC Macs:  http://get.adobe.com/shockwave/
    See in each Browser which version of Flash it thinks it has...
    http://kb2.adobe.com/cps/155/tn_15507.html
    Then Test Adobe Shockwave & Flash Players...
    http://www.adobe.com/shockwave/welcome/

  • I am still having problems with my music videos freezing (all purchased from iTunes) since the update.  Have restarted, rebooted etc. and it is worse than before.  Help!  Spent a lot of money on these and they won't play properly.

    I am still having problems with my music videos freezing (all purchased on iTunes) since the update.  The first day of the update, no problems...played 6 hours of music videos and no freezing.  Today...every single video froze!!! So frustrating!  I rebooted, restarted, powered down and no help.   I would appreciate any suggestions.  Thanks.

    I don't know how to do this without using a mouse point.
    This may help, http://www.computerhope.com/issues/ch000542.htm
    As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
    Even the original order that the songs were entered or date added or last played can be sorted.
    Much easier with a mouse or touch pad.

  • I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer.

    I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh

    I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh

  • At event calendering site, getting message "There was a problem with your event submission. If you have disabled JavaScript please enable it and try your submission again." Javascript is ENABLED on my computer.

    I'm trying to submit an event to the events calendar at http://calendar.jtnews.net/events/index.php?com=submit. After I enter the Authentication words and press Enter, I get the message, "There was a problem with your event submission. If you have disabled JavaScript please enable it and try your submission again." According to my Firefox/Tools, etc., button, Javascript is enabled. I

    Hello mjswooosh,
    I'm very disheartened to hear that you've had ongoing problems when attempting to order from BestBuy.com. Our goal is ever to provide a fun and efficient shopping environment! Certainly creating aggravation serves neither you nor us and I apologize sincerely for this having been your experience.
    We recommend the troubleshooting steps you mentioned (i.e., clearing the browser cache, deleting temporary internet files and cookies) because this is the most common cause of this type of problem. I too have encountered this issue from time to time and these steps have almost always resolved the problem. I say almost always because there's one further step you can try: ensure that you have signed out of BestBuy.com, then perform the browser maintenance steps we've recommended. Afterward, before signing in to BestBuy.com, add your desired items to your cart and sign in as part of the checkout process. When the standard steps have not netted a resolution for me, this has solved the problem each time.
    I hope this helps. I'm very grateful that you took the time to write to us with your concerns and for sharing your very valuable feedback about your online experience.
    Sincerely,
    John|Social Media Specialist | Best Buy® Corporate
     Private Message

  • HT1338 My Macbook Pro 13" says that I have no more memory in my startup disk. I've tried clearing files and folders and deleting applications but it still says that I have low memory. How do I fix it?

    My MacBook Pro 13" says that I have no more memory in my startup disk. I have tried deleting applications, files, folders, and it still says I have low memory. What is taking up all that space?

    First -- do the target disk backup.  Somehow get a backup.
    You might try booting to Single user mode:  http://support.apple.com/kb/ht1492 and removing the files in the command line.  When you put files in the trash, the space is still used up until the trash is emptied.
    using rm command removes it totally.  Just be very careful because you remove the wrong file, and you have to relad the system

  • HT2510 having issues with Garage Band stating disc too slow...i have stopped ALL other apps, restarted and still having same issue....Please help!

    i have not been able to replay older Garage Band productions I have done. I got one to play and then when I edited and saved said did i want to save to newer version. I said ok...But getting repeated error that disc too slow and then starts playing in timeline but no audio then says Garage Band not responding.
    Please advise...

    Just some thoughts: You have an older Mac, so that could be part of the problem. You may have processes running in the background, or perhaps your disk is too full. Look in the Apple Knowlege Base for things like Startup Items, Launch Daemons, etc and see if you have any that you can get rid of. Also check your HD available space. If it's too full, your files are probably fragmented and spread all over the disk, which might make it respond too slowly.

  • I have read up, and am still having problems with RSS Feed

    Greetings Everyone.
    I really need some help with my RSS feed before I go insane. I would like to think I know what I am doing, but obviously there is some little (or big!) step I am overlooking.
    Ok here is my site: www.drewernst.com it is hosted by asmallorange.com
    My pocast is at www.drewenst.com/podcast
    This is the rss feed iWeb generated: feed://www.drewernst.com/podcast/The%20Jeff%20and%20Drew%20Podcast/rss.xml
    Now, from everything I have read so far - it seems that as long as you get the URL right when you are publishing to a folder, iWeb should do the rest. Also, it is important to put the whole folder containing your podcast in your root web folder otherwise it breaks the feed. Both of these things I have done. (obviously not correctly, or it would be working!)
    I read Many tutorials and topics I could find about this, but it still doesn't seem to work for me. Apple suggests taking the RSS feed an pasting it into itunes under Advanced menu "subscribe to podcast" to make sure your feed is valid before submitting to itunes.
    When I do this, I get an message saying "there was a problem downloading... An unknown error occurred (-50).
    I tried using a feed validator and it came back with so many errors. I just don't know that much about RSS, but i have been working on this for about a month and it's driving me crazy. No one I have asked at the apple store has been any more helpful than to suggest I just buy a .mac account and do it from there(honestly the nerve. wink.) I don't need .mac, I have my own website.
    Thanks in advance.
    Mr. Rss Crazy,
    Drew
    Oh, I tried to be as detailed as possible but if I left anything important out, please just ask...I will be watching this like a hawk.
    iMac 2.0ghz Core 2 Duo   Mac OS X (10.4.8)  

    So, my web-host said that it's a problem with the RSS feed, not there hosting.
    They pointed me to "Feed Validator" which I looked at before. I have a lot of errors.
    http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.drewernst.com%2Fpodcast% 2FThe%2520Jeff%2520and%2520Drew%2520Podcast%2Frss.xml
    Shouldn't Garageband and iWeb have taken care of these errors. I don't even know how I would correct them. I thought this was supposed to be a 1-2-3 process, like the documentation of both programs said.
    Sorry if I sound sarcastic, I am just frustrated.
    iMac 2.0ghz Core 2 Duo   Mac OS X (10.4.8)  

  • Still Having Problem with Battery Overheating with Car Dock/Charger when using Maps/Navigation

    I'm having a problem with the battery overheating when using Google Navigation in the OEM Samsung car dock and car charger.  On a trip last weekend, I started off with a fully charged battery (because posts on other sites have complained that the Charge cannot keep up with the power draw of the Google nav app while using the car charger).  About an hour into my trip, I got a message that the battery was overheating and to unplug the charger which I did.  I then had to contend with the screen going out because it was running on the battery.  I let the phone discharge to about 70% then tried the car charger again.  Within a few minutes, I got the same overheating message.  It was not an overly hot day and the car A/C was set at 68 degrees.  
    This morning (with the battery at about 85%) I tried to use the Navigation without the car dock while charging and got the same results...the phone battery overheated and I had to unplug the charger. The battery temperature reached 116 degrees. (also, the battery level was also dropping while using the Maps or Nav application even though it was hooked up to the car charger).  
    I'm very disappointed with this situation since I was hoping I could replace my old Garmin GPS with the Charge.  But between the phone dimming the screen while running on battery, and having a depleted battery in the phone at the end of the trip, its just not a viable option.  I really like this phone, but I'm running against the "return" clock.  
    Any ideas?
    Could this be a software problem that will be corrected by an update in the future?
    fyi:  other Charge problems in the last 5 days:
    - dropping audio on calls to other Verizon phones.
    - use of camera flash causing the phone to reboot.
    (I do have the 'class 4' 32gb card in my Charge)
    Thanks in advance,
    Rich

    Jerry:
    Yes, the phone is charging while in the car dock.  I confirmed it both under the "about phone-status-battery status" menu and by my battery widget.  By watching the battery widget, I also noticed that the voltage steadily increased over the ride home.  It started at about 3.90 volts and ended at 4.02 volts.  I don't know if that is significant.  This time the battery did not overheat.  The Max temp was 110 degrees, but no notice to disconnect came up.  This might be because the sun was behind me on the drive home rather than beating down on the dash like it was this weeked.
    I've ordered a cheap universal dock from Amazon for about $15.00 which clips onto the a/c vent.  I want to see if this keeps the temperature down.  If this works, I can still return the fancy-schmantzy Samsung OEM car dock. (The car-dock interface wasn't that impressive anyway).
    Please let me know if the volt change means anything.
    And thanks again for your help!
    Rich

  • Is anyone else having problems with apps? My computer seems to have lost about 500-600...

    It says I have like 746 apps, but over 2/3 show an exclamation point, and when I try to open them, it tells me they can no longer be found...
    My husband and I purchased the 4s each and have ios 5...thanks!

    Try resetting your device by holding down both the home and lock buttons for ~10 seconds or until the device restarts, ignoring the power slider.

  • I am using ios 7.1 but I still having problems with the level, how can it be solved?

    How to solve the problems with the level?

    The level that we have in the compass app, it still shows me -2

  • TS1398 Still having problems with my ipad wifi connection since upgrading to IOS 6.  Can Apple do something about it the soonest possible time.  I don't have this kind of problem using IOS 5.1.1 Can you at least put back the 5.1.1 if you cant find a solut

    So disappointed with IOS 6.  I'm having weak wifi connection since upgrading to it.  Can Apple do something about it? Can you at least reset it to IOS 5.1.1?

    Sorry Jim for the wrong question because I'm getting frustated with my IPAD since I can't use it for surfing internet with a faster speed.  Ipad was very convenient to use until this IOS 6 upgrade.  Tried all the suggestions in the forums but still gets back to weak wifi connection.

  • Still having problem with downloading to excel two ITs

    Three things I have to do are:
    - to have leading zeros in excel - (wich I solved with DBF filetype - >> is there any other way ?) ,
    - to append two internal tables one after another (to have them in one excel sheet), (did it calling two times FM )
    - finally to download them in one excel sheet .
    (Note, two internal tables are different ) .
    I used WS_DOWNLOAD wich works fine with DBF filetype ,
        BUT can not append two ITs with DBF filetype .
    When using GUI_DOWNLOAD append works fine
             BUT does not supports DBF filetype .
    Which FM is best to acomplish these three things together using ONE FM ???

    I allready tryied to use GUI_DOWNLOAD but it did not help
    Gives me error Invalid type

Maybe you are looking for

  • Issue in itunes apple id in app store

    hello i am using my itunes id in my iphone for downloading apps in app store. due to some reasons now i could not continue with my old apple id so i create a new apple id and remove my previous account by performing the following steps goto settings

  • Syncing issues on Sky drive

    Hi, I cannot be able to sync documents on skydrive to the shortcut on my PC.I am currently using sharepoint 2013.When i try to sync, i get the error "We can't sync this library because it's too large. For more information, please see SkyDrive Pro hel

  • Sequence Settings Frame Size, LIMIT?

    I want to export a sequence that's 1080x5760. Essentially 3 1080p screens right next to each other. Every time I enter this custom setting into the frame size of my sequence, I get a 4000 limit for both height and width. Shouldn't FCP be able to hand

  • I cant detect CTRL+any keys like a, c, v, x, Home, end key strokein mac

    hi, I have problem with mac internet explorer. Problem: i cant get key event for the keys Home, End, CTRL+C, CTRL+V etc. if anybody having an idea abt this please help me. I am in hurry. thanks in advance, rao.

  • Password to a jar file.

    How can we keep a password for a jar file ,so that we can keep our class files in it and get access to them .Please give me good suggestion.