I use Plaxo for my contacts, and I want it to synch my Outlook contacts with my PC. So I can't use my iCloud contact synch. My question: How do I disable my iCloud contact synch feature while still allowing the rest of iCloud (music
I use Plaxo for my contacts, and I want it to synch my Outlook contacts with my PC. I got a new HP PC with the (awful) Windows 8.0 operating system, and, to say the least, I miss the good old days. Plaxo customer support tells me that I can't use my iCloud contact synch because they clash.
My question: How do I disable my iCloud contact synch feature while still allowing the rest of iCloud (music, photos) to operate as usual.
What mysterious steps must I take in order to do this and not cause a complete meltdown in the process? The meltdown that I fear most is the one that happens between my ears.
Music is nothing to do with iCloud but Photostream is, so turn off Mail, Contacts and Calendars (in the iCloud Control Panel) and leave everything else on.
You will lose iCloud Calendars and Mail as well as Contacts, but you can manually re-enable mail (if you use iCloud email)
Similar Messages
-
Disabling computer account in Active Directory will still allows the workstation to login
I have a special scenario. A Widows 7 workstation was in lock mode (waiting for CTRL+ALT+DEL). As an administrator, I disabled the computer account, user account and even reset the password for that user and the workstation. My requirement
is that the user can not login to the workstation again.
However, the user able to login to the workstation.
What AD registry parameter could lock down the computer completely? or is there any parameter in GPO that could lock down the computer?
Thanks in advance.
Pingala
SPHello Karen,
I am testing with the DOMAIN Account, not local account. With your instructions,
Control Panel\All Control Panel Items\User Accounts\Manage your credentials
Select the corresponding credential and click Remove.
I am able to see local accounts and not the DOMAIN account locally cached.
BTW, I am not seeing "Manage your credentials", instead, I am seeing "Manage Your Accounts" in User Accounts.
Secondly, I am looking for a setup with AD GPO so that, for most of the Enterprise Windows 7 workstations, I would like to apply the policy across the board - "Once a workstation is disabled by the administrator, the domain
user for that workstation can not login again - especially when the workstation is in lock mode.
The article you cited did not give any technical details that could help me to clean both local and domain credential caching.
Please help me with the steps how I can disable the caching for local and domain credentials on the workstation to check this manually first.
Eventually, I would like to disable a "computer" in Active Directory that should lockdown the targeted workstation for further use. Or let me know what steps are needed to lockdown a workstation immediately when a user is fired before further
damage occurs to the enterprise resources.
Thanks,
Pingala
SP -
My daughter has a mac air that she needs for homework and school documents. She is however so distracted by her access to all that the internet has to offer that she is forever "doing homework"! How can I block some of her access while still allowing her to actually do homework and use Safari for research?
Thanks for your helpParental Control - found in System Preferences.
-
The rest of my music is still on my iPad, so how do I get it from my iPad to the computer, and back on my phone? All my music is sitting there safely on my iPad, but whenever I try to sync it with my computer the only option I get is to wipe the iPad and replace it with the files on the computer---which is only a fraction of what I had originally. How do I fix this?? It even deleted my playlists, and I now only have some 200 songs left out of what used to be over 1000!
It can not do that all by itself.
When you plugged it in, iTunes said 'Oh goody! You got a new phone! Would you like to make it just like your old phone?'...
You explicitly said 'Yes'.
You can't undo that.
No backup of the current state of the new phone was made. It was wiped and the last backup of your old phone was restored to it.
Anything you had on the new phone is gone. -
How do I move from one website to another using Safari, while still allowing Pandora to provide music in the background? It seems that when ever I open a new URL, I lose Pandora.
Try running Pandora in its own tab and leaving that tab open (Safari 7.1.5, OS 10.9.5). I don't have Pandora to try this, but it works for me otherwise.
Good luck
srb -
I have an AT&T locked phone valid contract for another year. I am planning for India visit for 3 months and I want to unlock my phone to use for my purpose. Apple care can help on this? or AT&T Customer care?
It's not going to happen. Even a cursory reading of the forums would have revealed this fact.
Apple can NOT help you. AT&T WILL NOT help you.
Leave your iPhone at home or in airplane mode while you're in India and buy yourself a cheap disposable phone to use while you're in India. I believe AT&T still has a program where they will put your account "on hold" while you are gone for a small fee. -
How to write data to the DAQ for a specified length of time while still reading the input data?
Hello,
I'm using labview 2012 and am trying to turn on a signal for a specified length of time in labview at the press of a button. The signal goes into an AO (PXI 6723) through my system, where the voltage gets divided by 2, the read in through the AI (PXI 6225). I want to write and read voltage constantly and then have a spike of voltage after pressing a button in LabView while still reading the voltage value for the specified amount of time.
Parameters:
constant voltage of 1 volt to Analog output (reading and writing) seen through a waveform chart.
for 1 second, turn on 3 volts and see the response on the waveform chart.
My specified delay time does not match the elapsed time. I am having difficulties doing this. I have attached the VI.
( I can't upload a functional VI since it shows "the contents of the attachment doesn't match its file type") How can I attach the VI?.
Thanks!
EduardoMike,
Thank you for your reply! I greatly appreciate it. I currently don't have any DAQmx timing in my application. I tried using it and, without really understanding how it works nor how to manipulate it, the whole test end up taking a long time to change the values i.e. too slow.
The DAQmx timing I used was the sample clock since it was for analog signals, but I don't really understand the buffer, what that means nor how to use it. inputting a rate time for it also made my test slower. The rate time is the samples per channel per second, but I'm not sure how to determine a number so that I am collecting the data I need and take into account aliasing.
I know the PXI 6225 has the capability to read 250kS/s (which I am assuming it's kilosamples per second or 250,000 samples per second). I am using 32 differential channels. I have read that I have to divide the maximum sample rate by the number of channels, (250kS/s / channels) but I don't know if I should count the number of total channels (64) or differential channels(32). In other words, is the per-channel maximum rate:
250,000/32 = 7,812.5 samples per channel per second, or
250,000/64 =3,906.25 samples per channel per second
Furthermore, If I know the number of samples per channel per second, how can I implement that knowledge to the DAQmx sample clock so that my sampling is as fast and as accurate as it can be?
I attached an image of my DAQmx functions in my code, I merged all the stacked sequence structures in paint so you can see them.
thanks for your help!
Eduardo
Attachments:
DAQmx tasks.jpg 211 KB -
I have an ipod touch but i don't have enough memory and 0I get an upgrade soon for my phone and i want the iphone but the thing is, can i have an ipod touch and an iphone on the same itunes account like can i use my money on my ipod account for my iphone
Your iPhone and iPod can share the same iTunes account. Apps can be freely shared and used by one or both devices. You can't use money in your iTunes account to pay for your phone, but purchased apps can be used by both the iPod and iPhone.
-
when i plug in my charger to my macbook and have it charged all the way i can only use it for an hour before it dies on me again. what is wrong with my macbook? what can i do to fix it?
Go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report in 10.7), then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.
Also it would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report in 10.7).When System Profiler comes up check the Model Identifier. -
I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this
I took away my backup disk with me so just took it from there excellent. I am back home at present working on my imac. When I go to use my macbook air on these projects (when away on boat) is it easiest to simply copy the Project and Events folders in total from my imac onto the other machine and do the same upon my return in reverse? I don't use icloud
-
When I bought my Mac they gave me a free hp printer. My mac is a 10.7 and the printer is for 10.6 and below.... so why did they give me this printer? Can I use it somehow or should I ask for a different one that is compatible with my computer?
Can I use it somehow or should I ask for a different one that is compatible with my computer?
No, that's not necessary.
You Mac most likely sat in inventory before it was sold so the latest drivers were not installed.
If you tried using the printer and couldn'tget it to work, go here > http://www8.hp.com/us/en/support-drivers.html
If this is a USB connected printer, make sure it's connected to your Mac, then at that link click: Detect Your Product
Download and install drivers for v10.7 / Lion. -
How do I transfer from iphone 4 to 4s while still leaving gaming apps on the iphone 4?
I would like to transfer all everything from my iphone 4 to a 4s while still leaving the gaming apps on the orginial iphone 4. My plan is to tranfer my phone number to the iphone 4s so that my son can use the iphone 4 as a gaming device only.
Do a backup of your 4, either to the cloud or your computer, depending on how you usually do this.
If you backed up your 4 to the computer, connect the new phone to the computer at this point, if you restored it to the cloud, do NOT connect it to the computer (or you might get an old backup by mistake). Just connect it to a charger.
When you first power up your new phone, it will ask you whether you want do configure it as a new phone or to restore it from a backup. Select "from a backup". The prodedure is slightly different for computer and iCloud backups, but you'll be able to figure it out.
This will restore all your apps, settings, and camera roll. Then you can either sync it to the computer or redownload your music and movies (depending on how you manage these things).
Once this is done, you can delete everything you don't want from the old phone. -
How can I burn music from my iTunes library to CD, while still keeping the track info intact?
I made several CDs for a friend, but when my friend imported the disc into iTunes none of the track names showed up (it just said "Track 1", "Track 2", etc.) This is annoying because it was 8 CDs worth of music (over 150 songs!)
Is there a software or any tool I can use that will allow me to burn music for friends, while still keeping the track info intact?Is there a software or any tool I can use that will allow me to burn music for friends, while still keeping the track info intact?
Yes. Click on this link to purchase gift cards for your friends. They will get nice new tracks with all correct tags. -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
Do you ever get tired of searching for a solution and just want to TALK TO A HUMAN BEING?
Do you ever get tired of searching for a solution and just want to TALK TO A HUMAN BEING?
This is not Apple Technical Support. If you want to talk to Apple, you'd need to use the information provided using the Contact Us link at the bottom right of every page.
This is a user-to-user forum. Most of us posting here are human beings.
Maybe you are looking for
-
Error while publishing a service with WSPUBLISH: Error publishing Endpoint
Hallo, I've a problem while publishing a service which a had created via proxy. I configured the service and one endpoint (binding) in SOAMANAGER. When I publish the service in WSPUBLISH I get the error: 'Error publishing Endpoint for SD : <Proxy>, S
-
Can't read the base station configuration
I just set up my AirPort Express using the Airport Utility, connected to Comcast high-speed Internet service. for some strange reason, the base station still has the "amber light blinking," while I seem to have no trouble with Internet connection (I'
-
Max. Concurrent # of users (SESSIONS) in RAC Env
Hello Fellows, Assuming that you have adequite SGA, PGA, Processes parameters...and given that you have enough RAM, CPU resources..... : - We have 2 RAC Nodes - We have SESSIONS parameter set for both instances to --> 1600. Does that imply that this
-
is this like a dual boot... and you boot the intel mac as a"rosetta volume" ? or is it software you apply to each app individually? so some could run in rosetta mode and some not. i don't undertand. thx.
-
Storing User defined reports in SQL Developer
Hi All, I have created some user defined reports in SQL Developer. My company requested me to update the OS from Win XP to Win 7. I forgot to export those reports. I got my machine back, they said that the data is retained. Now i need to take th