I use Premiere CS 3 for any AVCHD work i do

I won't use media encoder unless it's like really easy and short, like under a minute
one time i used it to convert several 1 to 10 minute long avchd clips to f4v or flv don't remember and it actually worked without causing serious sanity questioning.
however, i can say without getting into specifics or wanting to barf when people say its great is this,
it sucks.  it's unreliable for fast work of meaningful scope and length (talking heads, no corporate 90s videos and no TED talk slideshows) and i'd use final cut any day and wait on it cause the image quality is almost always better, i've had better luck using bridge to import full timelines into after effects from premiere cs4 and outputting there, i did do that once, i don't remember how because it was out disbelief that i had to.
premiere cs4 with avchd is also awful.
premiere cs3 for exporting and using avchd, is absolutely superb, the abomination that is ame cs4 makes me sick to the point of getting another camcorder so i never have to use it or premiere again, unless it's premiere cs3 or cs2 if cs2 could handle avchd.
i mean this in the best of ways, MEncoder CS4, is awful
NOW YOU THINK YOU GUYS CAN PUT TRUE vanishing point features in Ae so i can keyframe it?  or is that still too hard or not of interest
and in the Ae timeline, EVER HEARD OF FOLDERS?
Keeping it dirty in a synthetically sanitized world,
Your Welcome

Reinstall CS5 and see if that re-writes the common files for you. If it does not, you'll have to uninstall both versions, run the clean tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 ) and then reinstall first CS4, then CS5.

Similar Messages

  • [SOLVED] enable apache ssl to use httpS at will for any vhost

    Hi,
    I have enabled ssl on my apache install without a problem by including the file httpd-ssl.conf in my http.conf.
    I have tested access by trying to access my phpmyadmin install by going to my site: https://example.com/phpmyadmin
    However, when trying to use a vhost with https, it doesn't work, I get redirected to a default page (first configured vhost) as https.
    If I modify the vhost like this, adding 443:
    <VirtualHost *:80 *:443>
    </VirtualHost>
    I get an error "(Error code: ssl_error_rx_record_too_long)".
    If I just add to the vhost config file instead like this:
    NameVirtualHost *:80
    NameVirtualHost *:443
    SSLStrictSNIVHostCheck off
    then I still only get the default site, but not my vhost site under ssl.
    Any pointers on getting this to work? I want to be able to universally add an "s" to "http" for any vhost whenever I feel like it to encrypt traffic...
    Thanks!
    EDIT: Here's the solution I found. I disabled ssl on apache by commentingout the httpd-ssl.conf-Include directive in httpd.conf.
    Then I installed stunnel and pointed it to my server key and certificate and enabling https connections to forward to port 80 on localhost.
    One gotcha to look out for was to put "https: ALL" into the /etc/hosts.allow file as stunnel apparently uses this to decide whether a client can connect.
    Last edited by awayand (2011-04-24 12:10:46)

    Apache is already listening on 443, otherwise it wouldn't work at all when I access https://example.com/phpmyadmin. My problem is that instead of responding by serving the requested vhost, apache serves only the default vhost page. For example, https://x.example.com, https://y.example.com, https://z.example.com all serve my default page at https://example.com instead of the corresponding vhost. Any idea as to what to configure so that apache serves the requested vhost under https?
    EDIT: clarification
    Last edited by awayand (2011-04-23 04:39:02)

  • Run out of Hard Drive space using Premiere Cs5- Can I save my work, buy and new hard drive?

    I am in the middle of a project using premiere cs5 and I have run out of hard drive space. Can I save it, buy a new hard drive and install Premiere and then reopen it again without  it effecting my project?

    If you are talking about only having one drive for Windows and programs AND video data and project files, a better option is to buy a second drive and move your projects and video data files to the new drive

  • Can I use Premiere Elements templates for Encore CS6

    LIke the title says.... can I use menu templates from Premiere Elements for Encore CS6? If so, does it matter what version of PRE?
    I've seen some templates on the web (e.g. muvipix) but don't know if I could use them in Encore.
    I saw somebody asked a similar question for CS4, didn't know what, if anything, had changed...
    ETA: Just FYI, I downloaded the Encore CS6 Functional Content and installed it, but honestly I'm not sure if it added any templates or what.... :)

    Also, I have to say, for stuff on that's so valuable, Adobe has made the page very hard to find and made the instructions as clear as mud.
    First, I'm still not clear on what the difference is between "Functional Content" and "Resource Central Library Content".
    Second, as far as I can tell, I never had the problem being addressed by the page (i.e. "When you access the Library panel in Adobe Encore, the panel contains no content."). My library panel always had content, just not a lot of it.
    My problem would more accurately be described as "When you access the Library panel in Adobe Encore, the panel contains surprisingly little content.". So the mother lode of content I was looking for was buried as an "Additional Solution" for a problem I didn't have.
    And lastly, the Functional Content is some oddly double-zipped self-extracting affair, and the "Resource Central Content is a more straight-forward compressed file, but unlike the Functional Content, it's a .7z file so you have to download a 7-zip compatible decompression tool.
    It's awesome that Adobe has that content, so I hate to complain, but it's not so awesome how hard it is find and install.

  • Using iPhone as Storage for any docs

    Does anyone know how can I user iphone as storage device? I had motorola phone with 8 gigs mem card, where I could drag any docs (word, excell or any pics and music) I know it's pain here already with all the podcasts that I downloaded to transfer to a different PC, how can I transfer Word docs?

    You mean you want to be able to take work files from one computer, upload them to the iPhone, then download them another, different computer? Just making sure I understand what you want to do.
    I do not know of any universal file transfer app like that, other than using some cloud-type storage perhaps as a go between computer(s) and iPhone.
    For MSOffice docs specifically, there is QuickOffice, which allows editing of MSOffice documents on the iPhone. QO transfers files between computer and the iPhone via an embedded (in the app on the iPhone) wifi web server. You enable the file transfer web server on the iPhone, and then connect via a URL in a web browser on any computer you wish that is on the same wifi subnet. Once the web page loads on the computer, you can upload or download files to/from the iPhone.
    Because of the app compartmentalization of the iOS, the office files on the iPhone would only be accessible from within QuickOffice.

  • How can I recover my YouTube favorites - I had hundreds related to my craft, and IO6 seems to have lost them.  I'm temporarily using Jasmine.  Thanks for any help.

    How can I recover my YouTube favorites after Io6?  I had hundreds of them for my crafts.  I'm using Jasmine as. substitute pending publication org an original replacement.
    thanks

    Favorites
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/817edd794b0091f8503 7d4ffff1d881f.jpg

  • How to search in Pages for any number or any character, using wildcards

    Is it possible in Pages to use wildcards to search for any instance of any number? For example, I want to find all occurrences of any one or two digits followed by a colon, such as 8: or 37:
    If I can't use wildcards, is there any other way to search, other than tediously searching for every instance of 1, every instance of 2, etc.?
    Thanks!
    Sue

    Hello
    Here is an enhanced version.
    --[SCRIPT highlight_ digitspluscolon]
    Enregistrer le script en tant que Script : highlight_ digitspluscolon.scpt
    déplacer le fichier ainsi créé dans le dossier
    <VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Pages:
    Il vous faudra peut-être créer le dossier Pages et peut-être même le dossier Applications.
    Ouvrir un document traitement de textes Pages
    aller au menu Scripts , choisir Pages puis choisir highlight_ digitspluscolon
    Dans les éléments de texte, l'arrière plan des groupes de chiffres
    suivis d'un caractère deux points sera mis en rouge.
    --=====
    L'aide du Finder explique:
    L'Utilitaire AppleScript permet d'activer le Menu des scripts :
    Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
    Cochez la case "Afficher le menu des scripts dans la barre de menus".
    --=====
    Save the script as a Script: highlight_ digitspluscolon.scpt
    Move the newly created file into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Pages:
    Maybe you would have to create the folder Pages and even the folder Applications by yourself.
    Open a Pages word processor document.
    go to the Scripts Menu, choose Pages, then choose "highlight_ digitspluscolon"
    In the text objects, the background of groups of digits
    with a trailing colon will be set to red.
    --=====
    The Finder's Help explains:
    To make the Script menu appear:
    Open the AppleScript utility located in Applications/AppleScript.
    Select the "Show Script Menu in menu bar" checkbox.
    --=====
    Yvan KOENIG (VALLAURIS, France)
    2010/07/17 -- enhanced to treat also text boxes and shapes
    --=====
    on run
    local en_liste, le_dernier, un_groupe, le_premier, recul
    local les_boites, une_boite, les_formes, une_forme
    Try to treat the main text layer
    tell application "Pages"
    try
    set le_document to name of document 1
    tell document 1 to set le_texte to body text
    on error
    set le_texte to ""
    end try
    end tell -- Pages
    if le_texte > "" then
    set en_liste to my decoupe(le_texte, ":")
    set le_dernier to 0
    tell application "Pages" to tell document le_document
    repeat with i from 1 to count of en_liste
    set un_groupe to item i of en_liste
    set le_dernier to le_dernier + 1 + (count of un_groupe)
    set recul to 0
    repeat with j from 1 to 10
    if character -j of un_groupe is in "0123456789" then
    set recul to -j
    else
    exit repeat
    end if
    end repeat -- with j
    if recul < 0 then
    set le_premier to le_dernier + recul
    set character background color of characters le_premier thru le_dernier to {65535, 0, 0}
    end if -- recul < 0
    end repeat -- with i
    end tell -- Pages…
    end if -- le_texte > ""
    Try to treat text boxes
    try
    tell application "Pages" to tell document le_document to set les_boites to every graphic whose class is text box
    on error
    set les_boites to {}
    end try
    if les_boites is not {} then
    repeat with une_boite in les_boites
    tell application "Pages" to tell document 1
    tell une_boite to set le_texte to object text
    end tell -- Pages…
    my highlight(le_document, une_boite, le_texte)
    end repeat
    end if -- with f
    Try to treat shapes
    try
    tell application "Pages" to tell document 1 to set les_formes to every graphic whose class is shape
    on error
    set les_formes to {}
    end try
    if les_formes is not {} then
    repeat with f from 1 to count of les_formes
    I know that using whose is more efficient than using an index but, in Pages '09, whose doesn't apply to shapes. *)
    tell application "Pages" to tell document 1
    set une_forme to item f of les_formes
    tell une_forme to set le_texte to object text
    end tell -- Pages
    my highlight(le_document, une_forme, le_texte)
    end repeat -- with f
    end if
    end run
    --=====
    on highlight(un_document, un_contenant, son_Texte)
    local en_liste, le_dernier, un_groupe, recul, le_premier
    set en_liste to my decoupe(son_Texte, ":")
    set le_dernier to 0
    tell application "Pages" to tell document un_document to tell un_contenant to tell object text
    repeat with i from 1 to count of en_liste
    set un_groupe to item i of en_liste
    set le_dernier to le_dernier + 1 + (count of un_groupe)
    set recul to 0
    try (*
    Useful if a shape was erroneously pasted in a text box. *)
    repeat with j from 1 to 10
    if character -j of un_groupe is in "0123456789" then
    set recul to -j
    else
    exit repeat
    end if
    end repeat
    end try
    if recul < 0 then
    set le_premier to le_dernier + recul
    set character background color of characters le_premier thru le_dernier to {65535, 0, 0}
    end if
    end repeat
    end tell -- Pages
    end highlight
    --=====
    on decoupe(t, d)
    local oTIDs, l
    set oTIDs to AppleScript's text item delimiters
    set AppleScript's text item delimiters to d
    set l to text items of t
    set AppleScript's text item delimiters to oTIDs
    return l
    end decoupe
    --=====
    --[/SCRIPT]
    It scans the main text layer in Word Processor documents.
    It scans text boxes and shape in Word Processor and Layout documents.
    Is it useful to scan :
    headers, footers, tables ?
    Yvan KOENIG (VALLAURIS, France) samedi 17 juillet 2010 21:07:04

  • Importing HDV footage - seems you don't want to use Premiere (?)

    Hi everyone, and good morning.
    Well, after many great posts, and lots of help here, I think I realize something....
    If you own a camcorder that does HDV footage ( like my Canon H20 ), you must use something other than Premiere to import your original footage from the camcorder, if you wish to do any type of editing in Premiere later on.
    If I understand what you have all told me that is.
    For clarfication, last week, I imported my first HDV tape using Premiere, and the resulting file was a very high quality .mpeg file, however, it was not editable in Premiere at all. The audio and video were totally out of sync.
    So, I then re-captured the original video from the camera into Pinnacle Studio 11, and this resulted in 2 files, a video and audio file. ( .wav and a .m2v file ). These files import into Premiere very well, and the audio and video is perfectly in sync from beginning to end.
    With all this said, is there any point at all in keeping the original .mpeg file that I originally captured from the camcorder into Premiere ???
    At this point, I don't see any advantage to this, but thought I would ask. I've read numerous posts that .mpeg is just not great for editing, etc,etc, so perhaps I should just delete this file, and keep going the route I'm now using ( capturing the original camcorder footage with Pinnacle Studio 11 ) (?? )
    I also wonder, if one only owns Premiere, then what on earth do you do, if you have an HDV camcorder ? ( perhaps all of you that own one of these camcorders, capture the video footage from the camcorder, in a program other than Premiere ? )
    Thanks for any info you may wish to give,
    Dave.

    I am not so sure the problem is always restricted to CS3 captured footage. I convert from AVCHD to HDV (usually using Elecard, or Procoder etc) and find that if I stitch the output into a longish single HDV file then although that hdv file plays ok in a player, and is in sync - it loses sync when imported into PP CS3 - but is OK in other NLEs (well Vegas) Seems to me that CS3 cannot hold sync if (some) hdv clips are simply longish. Bad bug!- although seems it's being worked on according to similar threads

  • What exact file format for exporting AVCHD to HDD of Sony HDR-SR12E (AVCHD) Handycam?

    When you are finished editing AVCHD files with Adobe Premiere Elements 11, what is the correct file format for exporting back to the hard drive of the Sony HDR-SR12E handycam?
    I used Sony Play Memories software to import AVCHD (.m2Ts) files at 1920x1080i PAL resolution. I tried rendering to several file formats after editing, but the files could not be exported in high definition back to the hard drive of the AVCHD camera. 
    I WAS able to import files from camera in Play Memories and then export them straight back to camera WITHOUT any editing, but of course you wouldn't bother doing this normally.
    I grew to love using Premiere Elements 10 for editing sd footage from my mini dv camera. However,  I've just purchased the AVCHD handycam and expect to receive my newly purchased copy of Premiere Elements 11 in a couple of days.
    Can anybody suggest the correct file format to produce for exporting AVCHD footage edited in PE11 originally captured on the Sony HDR-SR12E back to the camera?
    - Regards, Phil

    Phil
    Premiere Elements 10 has the Share/Tape (Record to DV). And, even that is for just DV, not HDV. There is no such choice in Premiere Elements 11 and 12.
    So, you are going to have to match up the properties of the original with Export settings and try to get the file exported onto the camera's hard drive if that is possible. Does the Sony user guide give instructions for how to import one of your video to its hard drive?
    The theory depends on how close you want the export of the edit to match the camera's original. There is no .m2ts file extension in any of the Publish+Share/Computer/AVCHD choices. If the .m2ts file extension is a must..
    One scheme to get a AVCHD.m2ts 1920 x 1080i25 for your camera's hard drive - lots of ifs
    1. Publish+Share/Disc/AVCHD and burn to folder using presets = H.264 1920 x 1080i PAL Dolby.
    (The preset cannot be customized so you will go with the Adobe bitrate.for the preset)
    2. Then go to the folder saved to the computer's hard drive, open the BDMV Folder, then the STREAM Folder of the BDMV Folder, and use the 00000.m2ts file there as your file destined for your camera's hard drive.
    If the hard drive will accept ..m2t, then you could use Publish+Share/Computer/AVCHD with Presets = M2T - H.264 1920 x 1080i25 and customize the export settings under the Advanced Tab/Video Tab and Audio Tab.
    Please review and then let us know if any of this works for you.
    Thanks.
    ATR

  • Use of NAS disk for project material

    I intend to buy a new computer. I have used and vill continue use a 2 TB NAS disk in the system to store photos, documents and videolips. It is a Synology DS111 with Gigabit Ethernet connection.
    I will use this computer for videoediting. I have used Premiere Pro 1.5 before and DV material and even if the system was not very fast it worked until now. I will purchase Adobe Premiere CS6
    I intend to include a 256GB SSD as system disk(Samsung 840 or similar) and a 128 GB SSD as scratch disk.
    The rest of the computer will probably be
    Intel Core i7 3770K 3,5Ghz (Ivy Bridge)
    2x Corsair 8GB (1x8192MB) CL10 1600MHz VENGEANCE
    Asus P8Z77-V
    KFA2 GeForce GTX 660Ti 2048MB OC
    I do not know how Premiere Pro CS6 handles files in runtime so my question is how much the NAS disk will be involved in video editing if I have Premiere Pro installed on the system disk (SSD) and use the second SSD for scratch disk. Video clips will be on the NAS.
    Can the videoediting still be fast when rendering and exporting contents except that final storage to NAS will not be lightspeed fast. Any comments on this usage are highly appreciated.
    /Stefan

    Stefan,
    I'm not sure from your post whether your plans are to continue working solely with DV video or whether you have some plans in the future for HD formats.
    In any case, I think that you would be much better served by making changes to both your hardware plans and workflow more along the lines of the following:
    Single 128GB Samsung 840 Pro (don't get the std. 840, its writes are much slower) - OS/Programs; if you turn off the hibernate feature 128GB should provide plenty of space
    Two 1TB 7200 rpm drives and either spread the load (projects and media on one and scratch / cache / outputs on the other) or RAID 0 them and put all files on the RAID array
    Do nightly backups of media and project files to your DS111 (orgainze your directory structure so scratch, cache, and output files can be easily ignored from the backup)
    This plan with give you way more speed and improved redundancy as well (as the DS111 is only a single drive unit).
    With your new faster system you would probably enjoy using the local drives for photo editing work as well, especially if you go with the 2x RAID 0 array option.
    Finally, you should probably increase the RAM of your new build to 32GB; what Windows 7/8 does not use for programs is does use for disk caching and that tends to speed things up for photo and video editing workflows.
    Regards,
    Jim

  • HT1752 I have an old iMac (the rounded type with monitor).  I need a new keyboard and mouse.  Will any work?  thanks for any help!

    I have an old iMac for 2002....it's the rounded type that has an attached monitor.  The software is way outdated (OS X 10) and I only really use now to access 3,000 plus songs and old video of the family.  Both the keyboard and mouse no longer work.  Am I able to use any keyboard/mouse and plug in using USB?  Thanks for any help!

    Most any USB mouse or keyboard should work. Borrow one if you can and just plug it in.
    If the USB circuits are at fault then you can access via Firewire Target Mode with another Mac in order to get at the files.
    http://support.apple.com/kb/HT1661
    Another alternative would be to remove the hard drive and use a USB adapter to access it as an external  drive.
    http://eshop.macsales.com/item/NewerTech/U3NVSPATA/

  • Using lion, do i have any way of printing out on to a cd/dvd

    hi
    i have a epson printer R2880,  i have copied some vhs to dvd and now would like to print on my dvd's but the epson software only works on powder pc! any other ideas, software i may have but not aware of or what i can get  for free or will i have to spent some cash!?
    i do have CS5.0 photoshop, and various of its friends, but limited ability to use them!
    thanks for any help,
    P.S. i don't blame you if you all look and run...................!
    alan

    Hi Alan,
    Although the printers provided the print drivers via Apple Software Update, the Epson site do seems to provide additional CD printing software for Lion.
    Please follow the link below and expend the Utilities section:
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=104488&BV_UseBVCook ie=yes&infoType=Downloads&platform=OSF_M_X7
    Hope that may help,
    Shlomi

  • I have an iMac and an HP laptop, can I use my one license for both?

    So I asked the other day how many computers one purchase, of the education version, would cover and Adobe told me two. Now I want to know if they will cross platforms. I am looking to ask for a new desktop for Christmas and I want a iMac, but I am worried that I won't be able to get cs5 on that and my pc laptop. So I guess my question is can one license cross platforms, and what computer should I get?
    I am partial to the user friendliness of Mac, but all my training and other programs are for pc.
    You can see my dilemma. Please help!

    Unfortunately no NobleC.  The only way to reduce the cost would be if you purchased a volume license.  But to receive a discount you would need to purchase more than two copies. 
    If you are not planning on using the Mac primarily for your creative work you could use a Windows virtual machine to run the software.  The performance would not be on par with running it on the Mac natively but should be ok for minor editting and opening documents.  The other option would be using Boot camp to boot into Windows and install our software while running Windows natively via Boot camp.

  • I want to use my iPad 2 for fantasy football, I need to be able to enter the draft room but I need flash player. How do I do this seeing flash player doesn't load with apple?

    I want to use my ipad2 for fantasy football and I want to draft with it. How do I do this seeing apple and flash player are not compatible?

    Yea there really is no app or browser you can use. Until adobe and apple settle their differences and realize they should focus on meeting their customers needs my iPad 2 is just a larger version of my iPhone and I still need to use my Mac book for school and work.

  • What's hardware should upgrade for Using Premiere CS4 to editing (AVCHD)m2ts file?

    What's hardware or software should upgrade for Using Premiere CS4 to editing (AVCHD)m2ts file?
    1st question: when i try to do editing by using Premiere CS4 AVCHD sequence timeline, the edting monitor seems not smooth (like wearing goggles) & delay, and when i use AME to encode m2ts file (which not yet edit) to AVI file (about 1 hour), it take 2h 13min to finish, is it normal?
    2nd question: i use mpeg2 HD 1440 file to do eding, the edting monitor also not very smooth but better than using m2ts file, after editing done, i try to encode these mpeg2 HD 1440 file (which edited about long 1 hr) to a New file mpeg2 1440 X 1080i HQ or even mpeg2 Pal DV HQ file, the encoding was not runthe encoding after wait for half an hour. How many hours it take usually????
    3rd question: i use m2ts file video file to export as a Bitmap, 1 frame 1 picture bitmap, it take long time too, about 1 or 2min to finish encoding, if i export more than 1 picture, it take even more time, i have experienced it, 3 or 4 pictures need about 10 or 15 min to finish encoding. i used to using mpeg2 HD 1440 file (which edited file) to export frame as picture, it not run the encoding at all. WHY ????
    i'm new in Premiere CS4,so i got many question about Premiere CS4, usually i use Premiere Pro 1.5 version
    my computer is: Intel (R) Core (TM) 2 Duo CPU
                             E7400 @ 2.80 GHz
                             2.80 GHz, 2.00 GB RAM
                             Graphic Card: ATI Radeon X1650 series
                            2 Hard Disks in my computer (C Drive is 300 GB (not sata) , D Drive is 500 GB sata)
    4th Question: Premiere CS5 & Premiere CS4 which one is better ???
    5th Question: What's different ATI Radeon and NVIDIA Card, which is better, which u suggest to. What is different Graphic Card and Video Card ?? Should i install HD Video Card ????

    I don't think a core-2 will work very well with AVCHD... you need at least an Intel i7 920... or whatever is current
    My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to the computer I built... since the GTX 285 is no longer sold, I would now go with a GTX 460 or whatever is the current "best bang for the buck" - AND I would buy 4Gig-by-3Sticks memory to be able to expand from 12Gig to 24Gig if needed
    For my home hobbyist, family movies (which means that I am not trying to recreate Star Wars with video effects or many layers) AVCHD editing is "as smooth as spreading warm butter on hot toast" (also the MP4 video from wife's Flip camera)
    My 3 hard drives are configured as...
    1 - 320G WD Win7 and all programs
    2 - 320G WD Win7 swap file and PPro projects
    3 - 1T WD all video files... read and write

Maybe you are looking for