I use Rogers internet and a Dlink wireless router at home

I can not connect to the internet using my ipod touch.

Hi onome-salu12,
Welcome to BlackBerry Support Community Forums.
Do you have a BlackBerry data plan with your wireless service provider? You may want to verify with them that you have the correct data services enabled.
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

Can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

Yes, if the AirPort Express is set up to create a wireless network that uses the exact same wireless network name as the other router and the same wireless network password as the other router.

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

No airport card installed! I'm not using the internet and now what should I do?

no airport card installed!
I'm not using the internet and now what should I do?

 menu/About this Mac/System Information (at the bottom, may be called something else) - run that and see if the Airport card is detected.
Some things you can try.
https://discussions.apple.com/message/22246571#22246571
If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing.
Genius Bar Reservation US

I want to use my jetpack 890L as a wireless router to allow wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

I want to use my jetpack 890L as a wireless router to enable wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

I’ve used several wireless printers with a 4510 and 5510 Jetpack and they all print just fine. The MHS890L does not support WPS. The WPS Wikipedia article briefly addresses the reason why you should not use WPS. If you’re having trouble setting up your printer the manufacturer has a toll free support line to help you. Your Jetpack has the Wi-Fi Password on the bottom, under the battery, and or in the LED display.

How to hookup AE to dlink wireless router hardwired to computer??

Guys,
I have a computer that is hooked up directly to a dlink wireless router. I bought the router specifically to communicate with AE. I cannot find any network to join. Will a setup like this work?
Or do I need to just go back and buy a wireless card for my computer?

The ethernet port on an AX is only active and usable for an external device when the AX joins a network using the WDS protocol. WDS only works with AEBS, AX, and a limited number of third-party wireless routers. Without buying a WDS compatible router, you will need an ethernet to wireless bridge like the Linksys WET54G, or a wireless card for your computer.

HT4145 Can I link up a Dlink wireless router to a Airport Base Station

Hi All,
need advise on whether can I link up a Dlink wireless router to a Airport Base Station and if can how do I set it up.
with regards and thank you
Chris

If your goal is to either extend the D-Link's Wi-Fi network with the AirPort or the other way around, then the answer is no. That is because, most non-Apple routers are not WDS-compatible with the AirPorts.

I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please iPhone 4, iOS 7.0.3

I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please
iPhone 4, iOS 7.0.3

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Di-641+ Dlink wireless router not acquiring dhcp ips

I have this home user with a Di-641+ Dlink wireless router not acquiring dhcp ips. This is both with the Windows or Dell managing her wireless networks. However, it works fine in our office connecting our Cisco AP541L access points. Any ideas or suggestions other than physically looking at the device.

cascoli_2008 wrote:I have this home user with a Di-641+ Dlink wireless router not acquiring dhcp ips. This is both with the Windows or Dell managing her wireless networks. However, it works fine in our office connecting our Cisco AP541L access points. Any ideas or suggestions other than physically looking at the device.
Good afternoon,
As per your post, your home user is having issues with the D-Link product, not the Cisco products. This forum serves to provide technical and presales support for Cisco devices only.
I did take the time to locate the free support number for the D-Link products: 1-877-453-5465
In light of all of this, I am glad to hear your Cisco access points seem to be working well!
Best of luck,
-Lindsey

Someone used a pc to access my wireless router, the admin name went to their name, now I can get online with my MacBook???

A friend used her Dell to access our wireless router. She entered the router number on her pc, and it asked for the administrator. She typed in her name, now the rounter is under her name, and my MacBook is under her name. It won't let me or her connect to the wireless. It works fine if I hard-wire it. I've restarted the MacBook, and the router. Reset the modem and the router, still no luck. Any ideas?

Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

How do I use Time Capsule as my main wireless router and get rid of my other router?

I haven't been able to figure out how to use my Time Capsule as my main router, currently it's connected to my old router and isn't doing much as I'm still getting internet from my old, not as good router. How do I take advantage of the Time Capsule's capabilities and make it my main router? (Preferably get rid of the other one.) The Time Capsule doesn't have an ADSL port which is why I've found it difficult to do this and even when connected to the other router I'm still receiving internet from that one and not the Time Capsule.

SpaceMunt wrote:
Thanks, very helpful. The current modem/router I'm using to connect to the Time Capsule is in fact and ISP one, so now I just need to figure out how to "Connect to a network using ethernet to extend the network or create a second network" because whenever I try use that option it can't find the network it's extending and doesn't work.
You can only extend another Apple router wirelessly.

HT1695 I am at home and have a wireless router on my DSL line. I have been using the iPad for about a month without difficulty and tonight it will not connect. I do not understand why and yes, I am electronically challenged so be gentle!

I recently purchased an iPad after using a laptop and PC for years. I use a wireless router connected to a DSL line at home and have been using the iPad without difficulty for about a month and tonight it will not connect to the Internet. There is not a problem with the DSL or router. I am using the laptop now. Could someone please give this eectnically challenged individual assistance?

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Using Airport with itunes and as a wireless router- I'm confused!

Hello:
Since buying my Aiprort Express, I have used it to play music from itunes on my Windows 7 laptop, to my stereo. It works perfectly...or it did.
Last night, I configured the AE to work as a wireless modem so that when I am in a hotel with a wired internet connection, I can use my iphone and ipad. Again, this setup worked perfectly. However, now when I try to go back to scenario #1 and stream music to the stereo, the AE Utility can't find the AE and it has a blinking yellow light. I am using my original wireless network for scenario #1, not the new one created by the AE in scenario #2.
Can the AE be configured to do both of the above or did I wipe out the settings for scenario #1 when I set it up for scenario #2?
Thanks for any help you can provide. I'm not sure what to do since the Utility can't find the AE anymore.

You wiped out the settings for #1 when you set up the Express for #2.
You need to reset the Express back to factory default settings and then set it up again.
Power up the Express for a few minutes
Hold in the reset button firmly for 10 seconds and release
Allow a full minute for the Express to restart to a slow, blinking amber light
Now you can configure it for #1 again.

TS2756 If I'm connected to my home WiFi, using its internet and then us my iPhone 4s Person hotspot on a desktop....would the desktop be using the house internet or my phone's?

If Im Conected to my home WiFi on my iPhone 4s & turn on my phones personal hotspot & connect it to my desktop, Is the desktop using the houses internet or my phones internet???
I want my desktop in my room for me only but I dont have a phonejack in my room & dont wanna add one & I dont wanna long ethernet wire running from the living room to my room in the back of the house.
Please help

okay, I reset my router to factory defaults, unplug and plug in the cable modem, unplug and plug in the router, and now it seems to be working (crosses fingers).

Need Help setting up 2 wireless internet computers with 54g wireless router

I setup the 54g wireless router using the setup disk. It appears to have worked find and the first laptop has wireless internet. I am not familiar with setting up a totally wireless network so I am not sure if I did the rest right. I then setup the 54g wireless internet router on the 2nd computer. It appears to have loaded but will not connect to the internet. I looked at the linksys setup etc... for both computers and all is the same including the WPA key, IP address, and the rest. No differences noted. I have no idea why the 2nd computer does not have wireless internet access. It has wired access only. The 2nd computer shows the wireless network but won't connect to it. I click on it and hit refresh and nothing happens. I am at a loss as to what to do now.
With 2 wireless computers, must there be a main computer and a secondary computer? The 1st computer also doesn't have access to windows network setup for some reason. It tells me to go to the knowledge base at microsoft.com and look up 871122. No idea why the windows network setup is not working. It did work before I got a new cable service provider and modem. However, the windows network setup is working on the 2nd computer. Any help is appreciated.

does the 2nd computer even need the router info loaded into it like the 1st computer or should it be enough that the wireless network was created on the 1st computer? In other words, would having the router info loaded in both computers cause the 2nd one to not connect? I have spent hours on this and I am very confused now.
My router connects fine to the cable modem. the 1st computer connects fine to the router and gets the wireless internet without a problem. Again, the 2nd computer shows the network name but won't connect to it. help please!!

I use Rogers internet and a Dlink wireless router at home

Similar Messages

Maybe you are looking for