I use title line under picture to print info-all info has disappeared

HELP! I use my Iphone to record daily activities at my job site. It has been working beautifully (I thought) I import the pics into Iphoto 09 and since there are no books offered that arn't all cutesy. (Older versions had "Yearbook" which was perfect) I discovered that if I double clicked on the title line under each picture I could put in a brief description of each picture, this was even easier and faster than using the books and it printed out fine. I recently had need to go back three months to check a pic for some info and all info has disappeared in all pictures, (over a years worth of documentation up in smoke) just the time and date remain. is there anyway of recapturing this info? If not 09 is useless to me and I will need to go back to an earlier version. Evidently this info will only remain as long as the computer is not turned off (who knew??) Any advice would be appreciated. Mel

Welcome to the Apple Discussions. First try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, reboot and try the contact sheet again.
If that doesn't help, backup and launch iPhoto with the Command+Option keys depressed to rebuild the library. Select the last three options.
Click to view full size
Again, try the Contact sheet. The custom titles and/or descriptions are kept in the library's database file. Have you viewed the older files and their titles since upgrading to iPhoto 09? How did you do the upgrade to 09? If done wrong that can remove all the metadata.

Similar Messages

Can anybody tell me where the export current frame option is in the new final cut update? It used to be under the share menu but that menu has now been removed.

Can anybody tell me where the export current frame option is in the new final cut update? It used to be under the share menu but that menu has been removed now.

When I click File> Share> There is no save current frame option. Also Cmd E isn't working either.

I am using i tunes10.4.1. My list of purchases has disappeared. How can I restore it?

I am using i tunes10.4.1. My list of purchases has disappeared. How can I restore it?

hello Listener369, please try this: enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''browser.places.smartBookmarksVersion''' - right-click and reset that entry to the default value and restart firefox afterwards for it to take effect.

The option to upload pictures and videos to you tube has disappeared in i photo 9 How do I get it back so I can share to you tube

I use to click on share then you tube but
the option to upload pictures and videos to you tube has diappeared in i photo 9
How do I get it back so I can share to you tube

I do not believe that iPhoto has ever supported youtube uploads - the iPhone does - you may have found a third party plug in to do that - if so it would have been in the export options not the share options
LN

Using the one language invoice to print in all other languages

Hi All,
Is there any way or setting I can use so that one language Invoice to print all lanuguages say European lanuguages for testing purpose?
Right now the printing language is based on customer master and Output type condition record..
Any help will be appreciated.
Thanks
Netaji

Hi Tummuru,
Try to change the output type of the script during the runtime.
All output type information is stored in the Table: TNAPR.
&******** Reward point if helpful********&

ME22N : Change PO Line item to Display Mode, After All quantity has GRN

Hi Experts,
In ME22N, PO change mode if the line item has checked with 'Delivery Completed' Indicator in 'Delivery' tab I want to shows that row always in 'Display' mode. Please help me to modify that table control within the exit. I'm using,
Enhancement : MM06E005
Exit Name : EXIT_SAPMM06E_012
Regards,
Rajasekaran.S

Hi Raja,
Think that this is a late reply but might be helpfull to others.
To make an item in display only mode you will have to create an enhancement implementation in the below method,
Class --> CL_TABLE_VIEW_MM
method -->MODIFY_SCREEN_TC_LINE
in implicit enhancement at the end of this method i code as below.
data : lv_ekpo type ekpo.
if <DYN_DATA> is assigned.
move-corresponding <DYN_DATA> to lv_ekpo.
if lv_ekpo-XXX is not initial.
loop at screen.
screen-input = 0.
modify screen.
endloop.
endif.
hope this helps.
If you have a better solution kindly share the same.
Regards,
Taher

IPhoto nightmare. Tried to import photos using Nikon software for the first time and all my photos disappeared from iPhoto 8.1.2 (and everything from itunes too). Newly reinstalled iPhoto crashes as soon as I import anything now.

Macbook OSX 10.5.8, iPhoto 8.1.2. I just tried to import some photos using Nikon software (View NX2) for the first time. When I next looked into iPhoto it was empty (so was iTunes but that's another story). I had backed up photos fairly recently but don't use time machine. Searched in vain everywhere and must have done something wrong because iPhoto wouldn't then open at all, saying it was unreadable. After a lot more attempts to recover I uninstalled iPhoto and the receipts and reinstalled from my original disc. It seemed to be ok and imported some photos from my iphone but as soon as the import is complete iPhoto crashes and when opened again it is empty. Have tried this several times and have shut down and have tried rebuilding with the alt and cmd buttons but nothing seems to help. Any ideas?

not a reply but not sure how to add something to my own thread! It seems that Desktop was damaged too as when I try to open it a screen says there is no application selected to open Desktop with. No idea what I should choose! Any help appreciated, have really made a mess of my MacBook this time.

Color Laser 2605dn Prints Lines on Pictures

Color Laser 2605dn Prints Lines on Pictures.
Normally all txt prints ok but I cannot get rid of the horizontal and vertical lines ( if the image prints vertical) on all images that it prints.
I rarely use this printer. I have gone under settings/print quality and calibrated but it does not fix the problem.
Please help.
Thank you.
JB

Looks like a high voltage power supply issue with the black only. Since the laser/scanner on this model uses 1 motor for 2 colors that would eliminate the laser/scanner. Repair by a repair shop may cost more than the printer. Only suggestion I can give to is do a google search for the service manual and download it. Look for instructions for the removal of the high voltage ps and remove it and then put it back in. There is always the possibility one of the connectors has become loose and is causing the issue. Good Luck.

Black line under title bar in AIR-App

Hi, does anyone know how to remove that black line under the title bar
which is shown in a MAC-Air Application?
I know I can solve this problem by making the whole app transparent. But that also means that
I have to do the whole skinning by hand, thats something I want to avoid. ;-)
thx
Mike

I ended up re installing Mavericks after the last update (10.9.1) from a bootble USB stick. The problem appears to have gone away, so maybe my original upgrade of Mavericks caused the problem???
I downloaded Mavericks again from the app store. When it had finished downloading (approx 5Gb) I exited the installer and created a bootable USB (needs to be 8GB minimum). Then booted from USB and ran the Mavericks installer. As I said problem seems to have disappeared......
I used this article http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html and used the method in Option 1 in the article to create the drive. A Synopsis of the steps are:
Format the USB using Disk Utility to Mac OS Extended with GUID partition.
Open Terminal and paste the following command press Return and enter admin password when prompted
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
It takes a while to create and copy the installer. (Could be up to 30 mins)
Finally reboot and hold down Option key while computer boots then select the USB drive.

Display Report Title line in Printer Queue Again

Post Author: ShowMeTheName
CA Forum: General
Hello, this is my question:
How can I get our Crystal Reports XI printed from our VB application to show again the line u201CCrystal Reports + The Report Titleu201D in the printer queue?
We first started generating reports with Visual Studio 2003 and Crystal Reports for VB.Net. Months later, we upgraded to Crystal Reports XI Developers Edition.
When we built our application in VB and CR for VB.Net (v.9?) and printed reports from it, they showed the Crystal Reports line with the report title in the printer spooler. Now that we upgraded to CR XI DE and compiled our program, the reports only show the line u2018Documentu2019 in the printer spooler. The report title is gone.
Does anyone know how to get that report title back? If we open a report in the Crystal Reports program and we print it from there, we do get that line u201CCrystal Reports u201C and the Report Title in the printer spooler. However, when we print the same reports from our VB application (and whatever upgrades installed by CR XI), the report title is replaced by a very annoying u2018documentu2019 word.
We need the report title to show in the printer queue to distinguish our reports.
In our VB app, we open the reports as a new ReportDocument and then we print them with the PrintToPrinter code.
Has anyone else had the same problem? Do you guys think that if we replaced the new report references with the original version will do the trick?
We donu2019t want to change or eliminate the u201CCrystal Reportsu201D words because I know we canu2019t. What we want is that line back so it can show the report title. I certainly like that line better than the u201Cdocumentu201D one we get now.
Thanks for your help!

Post Author: emoreau
CA Forum: General
as per http://technicalsupport.businessobjects.com/cs/forums/3054/ShowThread.aspx, it doesn't seem to be possible.

How to print a specific page from a given PDF document, using command line, please?

Hello,
I need your advise, please. My customer requires to print a specfic page from a pdf document they receive, using command line or 3rd party solution.
Anything you can advise, please? I have seen AcroRD32.exe options, but can only print the whole document.
Kind Regards

Not sure if there are any examples. The Acrobat SDK is a must, but it is best treated as documentation to study rather than examples to copy. The examples only illustrate a tiny fraction of the capabiliies.
(One other note: the solution must involve the client owning Acrobat; Acrobat is not for server use).

Pictures are printed on the edge of the paper using ipad with iOS 7

Pictures are printed near the edge of the paper instead of being printed on the center of paper. Using ipad 2 with ios 7 and hp 3520.
Can anyone suggest anything to fix this issue.
Thanks in advance !

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

Print using command line

Hello experts,
As mentioned in http://support.adobe.com/devsup/devsup.nsf/docs/52080.htm we can use command line instruction to open a pdf file in Acrobat Reader and print it.
Does anyone know if this works both in Windows and in UNIX?
Thank you.
Gie Kian Siauw

Hi Gie,
On Unix, you can use commandline instruction to create ps files from the pdf files.
for eg. "acroread -toPostScript -pairs a.pdf a.ps"
You can also pipe the ps output to a printer.
for eg: "acroread -toPostScript -pairs a.pdf - | lp -d <Printer Name>
This is a headless process of printing pdf files without the launching of acroread.
The file is not opened in the acroread and just printed.
Regards,
Rishi

I am using Adobe Photshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.

I am using Adobe Photoshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.. How do I get them back?

Hi,
Which operating system are you running on?
The date & Time can be displayed by going to the View menu and checking Details - also File Names if you want them displayed.
The Album information is saved within the catalog so it sounds as though you didn't do a catalog backup on the old computer and a catalog restore on the new computer which is the recommended way of transferring elements data. Did you just copy the photos over?
Brian

HT1430 I have 4 white lines down right hand side of phone I cannot use any icons under the lines

My I phone 5 has 4 white lines down right hand side I cannot use the icons under it. Can anyone help?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
As long as the issue is not the result of user damage (like being dropped) it should be covered under warranty. Only Apple can say for certain whether it is covered or not.

I use title line under picture to print info-all info has disappeared

Similar Messages

Maybe you are looking for