I used a Disk Warrior to rebuild my G4. When loading the program it wouldn't SU with the repair disc so I selected the Disc Warrior as my SU disk and repaired my hard drive but now I can't get the G4 to SU with anything but the repair disc. What do I do?
I used a Disc Warrior repair disc to rebuild by G4 Power Mac hard drive. It wouldn't
startup using the disc and the C key so I selected the Warrior as my startup disc, started up, repaired the disc and now I can't get the computer to startup on it's hard drive. It will only startup on the repair disc. What do I do to get back to normal?
Press the Option key at startup and select the hard disk.
(60933)
Similar Messages
-
Had to replace my hard drive. Now I can't get into i-tunes to enjoy or purchase new music.Are my i-tunes stored in my old hard drive ? Do I have to take my old hard drive to a computer store and have them placed on something called a flash drive ? I'm having the same trouble retrieving my Ancestry.com infor.
Yes, all you iTunes data are on the old drive. Get an external enclosure in which you may install the old drive in order to connect it to your computer and copy your iTunes data to your new drive.
Everything is on your old drive unless you copied it to the new drive. -
Hard drive crashed, replaced. Downloaded iTunes again, but now I can't get to my apps, music, movies, etc from computer through iTunes. Any help?
If you have access to them anywhere, restore them from it. If not, click here and ask, or redownload the applications freely.
(58121) -
Dear all, I have a MacBook Pro bought in April 2011. Last April, it got stuck while the wheel was spinning and I had to force it shut. That cost me my hard drive. Now, it's stuck again. I tried esc, cmd+tab, moving the trackpad on the apple, but no. HELP!
Dear John,
thank you for your prompt reply. After I sent the email, I left the wheel spinning to see if it would eventually stop. It didn't, but after a while the screen turned blue, so I decided to switch everything off with a forced shut-down. I could not restart with the OS DVDs because I am currently away from home, but fortunately everything was more or less fine after restarting. It then got stuck again, I forced it shut again, restarted again, and now it seem to work but I won't overdo it and will switch off smoothly after writing this (unless it gets stuck again). Last April I have replaced the HD, so it's now just under 6 months old. And, of course, since the crash occurred when I was abroad and had backed up just before I left, I have lost only a few days' work. Still, and I know this will make me hugely unpopular here, with my 5 previous laptops running on MS Windows I never had a problem. Which does not mean I loved the OS, or I would not have switched to Mac.
Anyway, and this is the main reason for this message, thank you very much again for your speedy intervention.
Claudia -
how do I restore all of my itunes content onto my newly installed computer drive? All my purchase are no longer in my account but I did back up the files onto an external hard drive. Now how do I get them back? Please
Ummals wrote:
...I did back up the files onto an external hard drive. ...
Did you follow all the steps as detailed here...
http://support.apple.com/kb/HT1751 -
I'm new to boot camp and have always used Parallels which was easier to install but now I can't get my hands on Windows 8 for boot camp? What do i do?
There is no Windows for Boot Camp. just buy a copy of Windows.
-
iMovie was removed from my macbook pro after I downloaded OS X Yosemite, I had it before and have used it, but now I can only get it through the app store. I can't pay for it so I would really appreciate the help.
Look in your applications folder for the installer - Install OS X Yosemite. Delete it. Then go back to the App Store purchases tab and see if you can download it. You might have to re-index Spotlight.
Spotlight – Re-index -
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos
Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I have just updated to Yosemite, but now I can't get the custom short-keys to work.
In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
Does anyone have the problem? All the other shortcuts work!Hi Thomas,
I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
Thanks for identifying this issue!
In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
Cheers,
Alex -
I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.
-
I just downloaded the new iOS7 onto my iPhone 5 and now I can not get my iMessage to activate with my Apple ID! My iPad connected just fine but my iPhone won't. Please help
I would go to Settings - General - Reset - and Reset Network Settings
Try it again after the phone restarts -
I have added a control app to my screen, but now I can't get rid of it. help
I have added an app to my screen,it's there all the time, and now I can't get rid of it. Help?
Tap the small down arrow at the top center of the Control Center. It's just above the bluetooth button.
-
My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!
11lizzyp wrote:
can't be saved because the file is read-only.
I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
More on versions here:
http://support.apple.com/kb/ht4753
local snapshots:
http://support.apple.com/kb/HT4878
Sounds like a permissions problem ie read only.
If running repair permissions from your DiskUtility.app does not sort it,
Someone should jump in here with erudite and concise fix. -
I had to reset my phone and I only have one of my ringtones I had 4.. Why'd it delete 3 and not the last one and now I can't get em back without paying for them again!!! What the **** is up with that??
Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.
-
Hi, I have a iPhone 4S and I reset the phone to factory settings bcos the iTunes and AppStore didn't work. Now I can't get my phone to turn on
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
recently had my settings reset and now I can't get my emails or texts unless I'm at home. What do I need to do?
I'm going to assume the reason your able to get them at home is because your connected to wifi?
Can you do anything else when connected to cellular data?
Have you contacted your cell phone provider re: the issue.
Maybe you are looking for
-
Primary Key in Internal tables?
Hi all, Im doing a ABAP- certification, so I need an exact answer , not the 'I think...' or 'it should...' answers. I often heard the sentence 'every internal Table has a key, even if you dont define one!'. OK, I was told, that SAP takes the non-nume
-
Business Connector - JRE memory problem
Hi, We have an Business Connector v4.0.1 under win2000 that uses IBM jvm 1.3.0 and due to the DST change we upgarde the JVM to SUN JRE 1.3.1_19, The problem that we have is that the Xmx limit for Sun JRE 1.3.1_19 is limited to arounf 1.7 M. However b
-
HT4946 itunes 10 or 11? Back up restore?
I backed up my iphone 4 yesterday ready to restore backup to my new iphone 5. I lost my whats app chat history today so want to use yesterdays back up. But I have realised it is itunes 10 not the latest 11. Does this matter? Or do I need to upgra
-
Which version of Safari adds the feature "Smart Search Field"?
The so called version of Safari's "Smart Search Field" will include function that automatically give suggestion based on what you type in the search field, just like this Which version of Safari add this function?
-
Unlock request denied by AT&T-what next?
I need to use my AT&T iphone when I go back to Germany but I have not had my iphone very long. When I came back from Germany (12 yrs with Army) in late Sept 2013, one of the first things I did was to aquire a cell phone and got an iphone 4s. Like it