I used iphone 3gs iOS 6.1.6 why i can't open an application camera 360 ultimate

I used iphone 3gs iOS 6.1.6 why i can't open an application camera 360 in my iphone

Hello Kunmon,
The following article provides some useful troubleshooting that can help get your iPhone's camera working correctly.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Similar Messages

  • I am using iPhone 4S , iOS 6.0.1. I can sign in using my apple password, but the App Store showing message your password is incorrect. Do any one help me?

    I am using iPhone 4S , iOS 6.0.1. I can sign in using my apple password, but the App Store showing message your password is incorrect. Do any one help me?

    Try This...
    Close All Open Apps... Sign Out of your account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I am running Lion (OS X 10.7.4) and trying to reinstall iLife06, a .mpkg file, using Installer.app.  I get a message "You can't open the application iLife06.mpkg because PowerPC apps are no longer supported."  Is there a work around??  Thanks in advance!

    I am running Lion (OS X 10.7.4) and trying to reinstall iLife06, a .mpkg file, using Installer.app.  I get a message "You can't open the application iLife06.mpkg because PowerPC apps are no longer supported."  Is there a work around??  Thanks in advance for any help that can be provided.

    The only workaround would be to purchase the current version of iLife apps from the App Store.
    Lion doesn't support the old PowerPC architecture anymore, which is what iLife '06 was written for.
    If the internal apps are universal, right-click on the mpkg and choose Show Contents. Then, dig through and run the specific installer package for each application.

  • Firefox 4 unable to use on imac G5 ( without intel chips ), get messageYou can't open the application bcz it is not supported on this architecture.

    My iMac G5 without intel chips, Mac OS X 10.5.8.
    using Firefox 364 no problem at all.
    But unable to install Firefox 4 on it, prompt "You can't open the application because it is not supported on this architecture"

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    There is a third-party version of Firefox 4 that works on PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

  • My iphone get switched off between when i use camera or any internet appliaction, e ven though my battery is at 100% please help ....!!! i use iphone 3gs model no A1303

    my iphone get switched off between when i use camera or any internet appliaction, even though my battery is at 100% please help ....!!!
    i use iphone 3gs model no A1303... AND SOME OF THE APPLICATION LIKE SAFARI & FACEBOOK AND WHATS APP GET CLOSED IN BETWEEN WHEN I AM USING

    Go to itunes and restore your phone from backup, make sure you have a recent backup in itunes of your phone first.

  • Respected sir/mam  , I m using iphone 3gs and it was running properly since todyesterday  but today I have updated my iphone 3gs to ios 6.1.3 after downloading and installing the update it stuck on "connect to itunes symble on my iphone screen?

    I m using iPhone 3gs (ios5.1.1) but today I update it to ios 6.1.3 after the update it got suckon " connect to itunes " symble. And when I was trying to connect it to iTunes it showed restore and update? When I selected that it start downloading ios 6.1.3 on iTunes . I m unable to use my iPhone what to do pls tell me?

    Unable to Update or Restore..?
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743

  • Hi frnds, i am using iphone 3gs, i want to know how can i update my iphone to ios 4.3.3

    hi frnds, i am using iphone 3gs, i want to know how can i update my iphone to ios 4.3.3 or any other ios.

    Please note the iPhone 3G can not be upgraded beyond 4.2.1.
    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • Iphone 3gs ios 6.0.1 keeps switching off when trying to use cellular data

    Hi everybody
    bought an used iphone 3gs a few days ago, the guy gave it updated to ios 6.0.1. I noticed as i put the phone on cellular data it switches off. and when turned on it comes till the unloack screen, and as i try to unlock it switches off again.
    Read a few threads and removed sim put the charger on and started and it starts and works like an ipod with no issues. After a while if i put the sim card and if its on charge it will work perfect with no problems.
    As i remove it from charge works until the battery level comes to approx 60 % and then turns off.
    Then i must again put it on charge , not because the battery is low but to start the phone.
    i have no idea whats goig on, first t ime apple usr and such horrible experience, any ideas?
    P.S - read many threads saying toggling on /off for cellular data. I cant do it without sim as i am on 6.0.1 .
    Please help phones really not doing what its supposed to. just switches off anywhere in meetings or on the go when i need to make calls.
    Thanks

    wyattrv wrote:
    Thanks Keith
    3g now working, didn't need the info after Password no filed on my settings for them. Don't suppose you know thw MMS settings do you?
    cheers
    rich
    On my phone it says BT GPRS MMS settings are
    btmobile.bt.com
    username bt
    password bt
    proxy not set
    port not set
    server not set
    MMMSC http://mms.bt.com/servelets/mms
    MMS proxy 212.183.137.12
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Hi. I am using iphone 3gs running on ios 5.1.1. I didn't find any software update option at any place in setting.  Please tell me how can i get it or how i would be able to download and install ios update without using computer

    Hi
    I am using iphone 3gs running on ios 5.1.1
    I didn't find any software update option at any place in setting.
    Please tell me how can i get it or how i would be able to download and install ios update without using computer

    Just use the phone the way it is, forget the apps.

  • HT4623 After update of my iphone 3GS ios, I found out that my iphone has returned back to factory setting. It shows on the screen that I need to sett up my iphone so as to start using. I followed the on screen display but the step keeps failing

    Dear Community,
    Please can someone assist me on what to do on the following;
    After update  of my iphone 3GS ios. I found out that my iphone has returned back to factory setting and it shows No Service on the top left corner of my iphone screen. It equally shows on the screen that I have to set up the iphone before using it again. I followed the on screen display then get connected to a WiFi, but the response I was getting is that the Set up Server cannot be contacted please try again latter. I chose the option of using itune through my Laptop. The response I was getting here is that my iphone cannot be connected the itune store because my iphone was not found.
    I am regretting why I updated the ios. Please, can someone advise me on what to do please.
    I am ernestly waiting for your kind response.
    Regards
    Daniel

    Hi iPheariPhoPad,
    Welcome to Apple Support Communities.
    It sounds like there’s an issue with Settings, the Notes app entry isn’t showing up as expected. Take a look at the article linked below and try restarting your iPhone 3GS.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    If that doesn’t do it, try restoring your iPhone as shown in this article:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Take care,
    -Jason

  • Am using iphone 3gs and updated it to ios 6.1.3, after this when i restar the phone and put the sim back it said that your phone cant be avtivated because the server is temporarily unavailable, my sim is also undetected. what should i do now please help.

    am using iphone 3gs and updated it to ios 6.1.3, after this when i restar the phone and put the sim back it said that your phone cant be avtivated because the server is temporarily unavailable, my sim is also undetected. what should i do now please help.

    If your iPhone was hacked/jailbroken to use a different carrier then the update locks it back again to the original carrier.

  • IPhone 3GS/IOS 6.1.6/Yosemite 10.10/iTunes 12.0.1.26 will not update or install apps

    I have an iPhone 3GS/IOS 6.1.6/iMac Yosemite 10.10/iTunes 12.0.1.26. I have always synced it with my 27 inch iMac with no problems.
    I recently attempted to install the apps "The Economist Expresso" and "Disconnect."
    I do NOT have (and have never had installed) the Wall Street Journal app.
    I do have a 4 digit passcode set.
    I do have Apples 2-factor authentication enabled.
    When downloaded by iTunes they show up in an iPhone window and are labeled "will install".
    I then click sync.
    The sync process begins and they "immediately" disappear from the iPhone windows and revert back to "install" in the list of apps.
    They have not installed and no error or any other message of any kind has been displayed.
    I suspect that this all began happening when I enabled the two factor authentication -- the iPhone is the primary location to receive the authorization code, and it has worked. It may also have begun happening when I upgraded to  Yosemite. I simply noticed that when syncing my iPhone, which I tend to do weekly by USB cable, not WiFi or iCloud; that the amount of free space simply kept growing.
    Today, I finally gave in and reset the iPhone, and then restored from a backup.
    Now I find that apps which I had been using daily, such as AP Mobile, were not restored, but also play this -- will install, then vanish -- game.
    This is clearly something which Apple has done to attempt to force me to purchase a new iPhone 6, but until now I have had no problem with my 3GS for what I use it for. This total lack of error messages will cause me to replace my 3GS with a non-Apple product as there is clearly no reason to stick with Apple.
    And yes, for me COST is a very big deal.

    iOS: Device not recognized in iTunes for OS X - Apple Support

  • Dear Communities, please kindly assist me. I use iphone 3GS with Software Version 4.1. Each time I connect my iphone to my Laptop through itune. itune automatically tells me that itunes connect to itune store. An unknown error occured(306)

    Dear Community,
    Please, kindly assist me with following challenges. I use iphone 3GS. I have used the phone for almost a year now. My iphone 3GS cannot connect to the itunes store. Each time I connect my phone to my Laptop through itunes. A message will automatically come up which states that "iTunes could not connect to the iTunes Store. An unknoown error occured (306)". It also make a footnote which states "make sure that your network connection ia active and try again". When I click the button labeled OK just below the messages, another message will come up which reads, "A new iphone software version (5.1) is available for the iphone software. Would you like to download it and update your iphone now?". It gives me the option buttons such as CANCEL or DOWNLOAD AND UPDATE or DOWNLOAD ONLY. If I click on DOWNLOAD AND UPDATE or DOWNLOAD ONLY. Another message will appear which states that "The iphone software update Server could not be conted" With a Footnote that states "Make sure your network settings are correct and your network connections is active, or try again later.
    The above challenge has continued for more that 3 months now. This challenge has hindered me from installing some applications like Facebook Application for iphone, LinkedIn application for iphone and a lot of other applications. Each time I try to get these applications my iphone 3GS while inform that my current ios version 4.1 cannot work with the application, that they requires at least ios version 5.1 or above.
    Please, I really need your kind assistance. I am ernestly waiting for responses.

    Dear Tim,
    I saw your message. Below are the problems:
    Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
    1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
    2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
    The above is the challenges I am facing now.

  • When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?

    When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?
    it worked the first few times i did it but the next day after i closed out of itunes once, the device only appears when i plug in my phone.

    Whenever a menu choice is grayed out, that is because you have Restrictions turned on in Settings.  Be sure to turn it off.
    You are confusing an itunes store account with an icloud account.  You two can continue using the same ID for itunes (thus sharing purchased music, apps, etc.), but you really should have separate accounts (different IDs) for icloud, since an account is intended for one user to keep his/her devices in sync.
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/
    Then go to Settings>icloud and scroll to the bottom of the screen and tap Delete Account.  (have restrictions turned off)  That will disconnect the device from the account but will not delete data in icloud or other devices.  Then sign in using the new ID.

  • I am using iphone 3gs can it be support with icloud ?

    in november 2010 i buy mobileme ID so now it became free,
    and i am using iphone 3gs now it is showing not applicable with this device,
    so, what can i do now,
    my current ios is 4.3.3..

    You need to setup the account using the MobileMe ID you chose when signing up for the service.
    It will be in form of an @me.com email address e.g. [email protected]
    http://www.apple.com/mobileme/setup/iphone_ipod.html
    You can't setup a full MobileMe account using a different Apple ID, such as the one you may use for these forums or the iTunes Store.

Maybe you are looking for

  • Please help me :( , ipod 5th gen 30 gb unrecognized , i swear big prize for one who have a solution for it

    hello all my name is Saray, I'm a 4th year Computer Engineering student, I'm from Spain and I often go to U.S.A I even had my eng course there last summer ... Anyhow my problem is with my 5th generation 30gb ipod which I have exchanged it with a harm

  • My wifi button is not working to turn it on my 4s

    My wifi button will not turn on, on my 4s it doesn't even give me the option to turn it on or off. What can I do to fix this problem?

  • Luxadm probe / Could not find the loop address for  the device at physical path

    Using EMC FibreChannel Disks on a Solaris 10 # luxadm probe No Network Array enclosures found in /dev/es Error: Could not find the loop address for the device at physical path. # echo $? 255 Any ideas how to fix? Thank, Marcel

  • 2 Print issues

    Hello I have a CAD document that contains lines and other entities. When I print from the CAD document the lines are solid. If I create a PDF from the same document and print it the lines are broken. When I look at the PDF the lines are solid. My sec

  • Suggestion for Finder

    I have been using my Mac for nearly two years, now.  As much as I love it, I have to admit I like the format of Windows Explorer better.  The single frame layout of Finder is just way too confusing.  The two-frame format is much easier to keep up wit