I used my iPad on a wireless network in Europe. Now I am trying to log in to a site from home in the U.S. and can't. Any ideas?
I used my iPad on a wireless network in Europe. Now I am trying to log in to a site from home in the U.S. And I get the following message
You cannot be logged in to your account because your membership is not valid. Membership with MySurvey.com is limited to U.S. residents only. We apologize for any inconvenience this may have caused.
many websites (mainly ones that stream tv) block all access from outside the country this have
to do with Comerical rights and the likes
any computer in the country you are in would be likely to give the same error
if it bothers you I'd try contacting MySurvey as you having a membership which imply
a login which imply a password which imply you're a valid U.S. residents maybe they will listen to
reason and open their ip range block filter
Similar Messages
-
My Macbook pro won't sync with my iPad. It says it isn't authorised. I have gone as far as deauthorizing all computers then authorizing the Macbook & still no luck. Any ideas?
Sorry, not sure how to screenshot on my computer, but this is what is says word for word:-
The Ipad could not b synced because the computer is not longer authorised for purchased items that are on this ipad.
To authorise this computer for items purchased from the iTunes Store, choose Store>Authorise this computer.
I have done all of that but not luck. That's when I tried deauthorising all computer which it did ok. I then authorised my Macbook pro again, it said I had one computer now authorised. I tried to delete apps via Itunes then sync to my iPad, but the above message keeps popping up & it wont do what I want. -
My ipad is flat and when I plug it in to charge it just repeatedly turns on and then turns off but isn't charging. I tried to plug into itunes but it just goes through the same ritual and can't maintain connection to itunes. What should I do ?
1. Reset iPad
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush -
iPad2 won't sync with iMac and only my iphone4 shows in the devices window on my iMac. For some reason it will not detect my iPad via my wireless network! The iPad will sync when plugged into the Mac however looses connection and disappears from the device window when unplugged.
Jayplus wrote:
I have a D-Link WBR-2310 and already bought an external antenna which cost me additional. Besides moving my iMac, what options do I have?
You already have a wireless router or have just bought one, or do you have an ad hoc connection from iMac to AppleTV?
If things worked in the other location this all point to poor network performance/connectivity. It may be the connection is intermittently lost - small files transfer ok, but interruptions during longer transfers scupper the process.
Interference from cordless phone bases or microwaves (and neighbours devices) might also cause connectivity issues.
Signal strength bars are often not that useful, but will indicate connection to the main wireless device they connect to - so AppleTv may have a good connection to the router but a poor iMac connection to router is not displayed by AppleTV which only shows the connection to the first device in the chain.
You could consider some home mains newtorking plugs such as those made by Devolo but they usually have to be on the same mains ring. -
I can no longer use my ipad to show Netflix on my TV since upgrading to ios7. I don't have Apple TV or airplay icon showing. What can I do to correct this problem?
This issue is with Netflix upgrade. I spoke to Netflix and here is the solution. Remove Netflix app from Ipad and reload the app version 5.0.1. This updated version will correct the problem.
-
The password for wireless network was changed. Airport keeps trying to sign in automatically with old password and won't let me put in new password. Any ideas?
You really should change both the wireless network name and password to avoid potential conflicts with the old and new settings.
Suggest you give that a try. -
I didn't used my iPad 2 for many months. Last week when I tried to use it, it wasn't charged. Then I put it on charging and again didn't used it for a week. Yesterday, When I tried to use it again it's saying that it is disabled for 22 million mins. I treid to restore it by connecting to iTunes but it's not restoring. Kindly Help.
Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks -
While doing a non-iTunes upgrade to 8.02 my iPad froze on the apple screen. After hours of waiting I forced a power off. Froze in same place. Tried attaching to iTunes on PC from power off. Freezing in same place. Any ideas on how to get past this so that I can at least run a restore?
I Don't know that recovery mode would work, but did you try it?
If you can't update or restore your iPhone, iPad, or iPod touch
IF that fails, have you considered erasing the device using Find my iPhone in iCloud.com? I'm not sure what good that would do either of the iPad continues to freeze, but if nothing else is working ..... -
When I take pics on my ipod touch it is using up a lot of memory...........my sister had the same one and can take way more pics. I tried restoring but still having memory problems...help
You are not connected to the internet. Try:
- Resetting the iPod
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Powerng off and then back on your router
- Resetting network Settings: Setings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
My wireless internet running slow on my mac computer! But is seem to be working ok on the other laptops! Can u help?
Hello,
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
Open Network Utility in Applications>Utilities>Info tab, select Airport/Wifi & what is the Link Speed & are there any Errors/Collisions on the right? -
I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do now?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
During startup my ipod is taking forever to connect to my wifi network. I have the corrct key and everything. Any help?
Your model MB528LL ipod is a 2G and can only go as high as iOS 4.2.1. many apps now require 4.3 or later.
You said "will not use the WiFi connection that I have looged on to it continues to tell me that it can't use anything without a secure connection."
Just what are you doing when you get that message and what is the exact wording of the error message? -
Can not use all the tools in my drawing markups any ideas on getting them to work?
Can not use all the tools in my drawing markups any ideas on getting them to work?
Hi tonys60181,
Could you please let me know what version of Adobe Acrobat are you using.
What all drawing tools are you unable to access?
Is this issue specific to one PDF file or all?
What exactly happens when you try to use any drawing markup?
Please let me know.
Regards,
Anubha -
i use my apple id that i create it for my iphone 4 on my new iphone 5,then i want to activate the imessage but i can't.what should i do?i want to know i can't use one apple id for two iphone 4 & 5?
HI
I was trying to take my Mac air to factory default settings.
I've done all that it says in the documment i was following, and them during the process it asked me the APPLE ID.
I put the apple id i have in my iphone. But it's not the one... it's said that i don't have any OSX associated with it... so it can not install the OSX.
So what can i do? -
My iPhone 5S is using 2.5GBs of storage for the camera roll. I deleted all but 190 photos and this did not change. My other devices cannot backup to iCloud due to the volume on my iPhone. Any ideas?
Try turning off the Camera Roll option in Settings>iCloud>Backup & Storage>Manage Storage>Your device. Then turn it back on again.
Cheers,
GB
Maybe you are looking for
-
The game section of the app store won't load on my macbook pro. I've tried redownloading iTunes to see if maybe there was a problem but it didn't work. I don't know what to do.
-
Hi Experts , The following select query creates a dump called time out error, May be this is taking long time to execute . Please tell me how to fine tune this select query? select v1vbeln v2matnr v2werks v1fkdat v1knumv v1fkart
-
Hi, I am trying to move Internal table contents to Z TABLE. I am having data issue. In debugging I see ITAB enteries say for example 100 all are not getting in to ZTABLE. I am not filtering anywhere I have 100 records in itab with fld1 = 'ZBC'. LOO
-
Anyone having problems syncing iPhone 4S & 3GS wit Outlook after the recent software update?
Trying to sync both phones with outlook (this was working perfectly till toady) but the contacts and calender have suddenly stopped syncing - I keep getting the following messages: "iTumes was unable to load provider data from Sync Services. Reconnec
-
Error while loading sdoapi into server
hi, i tried to load the latest sdoapi into an oracle 9i server using loadjava -r -resolver "((* SCOTT) ((* PUBLIC))" -u scott/tiger@gdfsuite -v d:\apps\JDeveloper\jdk\lib\sdoapi.zip i think that the follwing error causes the failing of the resolve pr