I used my wifi to update to ios 8 after like 4 hours it finished ans in the middle of installing the software it shutdown and everytime i try to open it it shows the itunes logo with the usp cable... any help pls
i used my wifi to download ios 8 after like 5 hours it finished and then it let me install, while installing the software it shutdown and everytime i try to open it it shows up the itunes and the usp cable logo... when i plug in the usp cable it says in itunes( ipad recovery mode) and when i press restore it start downloading the ios software again...... wats tht and what i can do pls help. thnx
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.
Similar Messages
-
My iphone shows an itunes logo with a usb cable
my iphien 5s is showing me an itunes logo with an usb cable
i tried to connected to itunes but nothis happen
i pressed and holed the power button while i connect it and nothin happened
i pressed and held the sleep/wake button and the home button and nothin happend
i tried every thing but nothin changed what can i do??Youll need to restore your Device, Click here for more infro
-
Good day, please help do a manual reset on my iphone 4s. I was updating my itunes and all a sudden i discover the USB cord disconnected while updating which later show me itunes logo with the USB cord charger display since yesterday. Help me gain access back to my iphone 4s so it can start working effectively . Thanks.
http://support.apple.com/kb/ht1808
-
hello i have a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing at the logo. If anyone knows what it is and what i should do please get back to me as soon as possible many thanks.
http://support.apple.com/kb/HT1808
-
I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?
Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.
-
HT4623 i updated my iphone but my screen now displays the itunes logo with the usb cable
i updated my iphone but my screen now displays the itunes logo with the usb cable
Recent photos may be in your Photo Stream or in your iCloud backup if you chose to enable those backups.
If you were only backing up through iTunes and didn't complete a backup recently, then your photos are gone.
~Lyssa -
Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
http://firecore.com/sites/default/files/imagecache/large-500px/wysiwyg_imageuplo ad/144498/IMG11.56.29_09-04-2012.jpg
What does it mean when my Apple TV displays the iTunes logo with a USB cable icon?You need to connect to iTunes via micro usb and restore
http://support.apple.com/kb/HT4367 -
Tried to upgrading ipad 1 from itunes and l guess it did not complete the process because all I have showing on the ipad is the itunes logo with the usb cable. When l try to connect it to my system, it resquest that a driver be used to install the device. Please help! How do I restore?
Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.
-
My iPad does not show me iTunes Radio with the new iOS 7 update
My iPad does not show me iTunes Radio with the new iOS 7 update
Hi, Abhishek642.
Thank you for visiting Apple Support Communities.
If you are a U.S. customer try forcing all applications to close and power cycle the device.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If the issue persists, try signing our of the iTunes & App Store on the device and signing back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
For more information on iTunes Radio and it's availability, see the article below.
About iTunes Radio
http://support.apple.com/kb/HT5848
Cheers,
Jason H. -
My Iphone 5 suddenly turned off and there is only the Itunes logo with the usb image and arrow key. I've now connected to Itunes but it doesn't work
Have a look through this Doc
http://support.apple.com/kb/TS3281 -
TS1369 iphone showing blue itunes logo with usb cable
after copying recent purchases from iphone 4s and
updating itunes software
iphone not showing in devices in itunes but
it does showing in Windows 7.
Iphone shows blue itunes logo with usb cable.Hi there gdavis433,
You may find the troubleshooting steps in the article below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
-Griff W. -
Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated
Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself. -
I just updated my iphone 4 with iOS and now my phone will not turn back on! When i try to turn it on it shows the apple icon, then immediately shows an itunes icon with a usb plug! Help!!!
Try Here > http://support.apple.com/kb/HT1808
-
Hi guys,
I need some everytime I try to download a song purchase from itunes I get the error message. 'Unable to Download Song' could not be downloaded at this time. I cannot even sync with itunes on the PC.
Kind regards
IanOne correction, from the icloud I was not able to listed to the entire song. So when you purchased the song if it wasn't downloaded to your library, chances are you have lost your opportunity to listen to it.
Maybe you are looking for
-
My iTunes library is on an old PC that no longer works. I purchased a new iPod Touch. How can I get the contents of my library to the new iPod?
-
How to run two programs with one PC and two monitors
Good Morning, I have a requirement to run a parallel loop and update the progress in two monitors with one computer. For ex: its a two test stage, the process and progress of the 1st stage needs to displayed in monitor1 and similarly for 2nd stage to
-
How to upgrade the extended web application for FBA from MOSS 2007 to SharePoint 2010?
Hi All, Currently my farm version is MOSS 2007 with SP3. I have a web application on port 80, and is based on windows authentication, and i extend it on the port 90, and the authentication is FBA with SqlServer. I know that SharePoint 2010 has a new
-
Is concatenation of numbers is possible in the loop??
Hi All, We have used the following code for our requirement in the rtf template.Here AMOUNT is a field name.But the following code is erroring out. <?xdoxslt:set_variable($_XDOCTX, 'A',1)?> <?xdoxslt:set_variable($_XDOCTX, 'Payout',0)?> <?xdoxslt:set
-
Show all music shows duplicates
When I turn on show all music my iphone shows duplicates of some songs. When I click the download it shows that it's downloading both and when its done it shows only one has downloaded. When I go on another phone with the same Apple id it doesn't sho