I used the chat room to find out how to get an update for auditon 2.0. They said I should use 3.0.

How do I download Auditon 3 so I can use this NOW?

Read the forum FAQ's. It's all in there.

Similar Messages

I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me.

I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me. I did check internet for solutions. The instructions I found said to use a "home button" on the remote. There isn't one. I sure would appreciate help if someone knows a solution. My first post - hope I did this right.

if its anything like my Sony, theres a button top left corner that upon each press i get an audible bleep and the AV inputs come up on screen, i then cycle down to whichever input i wish to select!
in case your remote is different, the button on my remote has a square with a slightly smaller square just overlapping the first square.
hope that helps?
rgds Lee.

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send scree

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?

If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
Download a free trial or buy Adobe products | Adobe downloads

Need help with getting images to look smooth (without the bitmap squares) around the edges. When I transfer the image from pictures, it sets itself into the InDesign layout, but with square edges. I need to find out how to get it to look smooth?

Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.

No Clipboard, no copy & paste, as you would not get the full information of the image.
When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode.

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

I have lost my registration code and I cannot find out how to get it back...

Can some one help me find out how to get my registration code back? I have been Googling many different places and I cannot seem to find a place to get it back. It would be much appreciated...
Thanks,
Nire Inicana

Hi,
You can just register again to get the registration code for VS.
Or you can find Visual Studio product keys using the Windows Registry:
For 32 bit Windows:
visual studio 2010
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\10.0\Registration\PIDKEY
visual studio 2013
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\12.0\Registration\PIDKEY
For 64 bit Windows:
visual studio 2010:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\10.0\Registration\PIDKEY
visual studio 2013:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\12.0\Registration\PIDKEY
Notes:
Data is a GUID without dashes. Put a dash ( – ) after every 5 characters to convert to product key.
If PIDKEY value is empty try to look at the subfolders e.g.
            ...\Registration\1000.0x0000\PIDKEY
              Or
            ...\Registration\2000.0x0000\PIDKEY
Best Wishes！
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Is there a way to find out how many ESS driven updates to data over a perio

Is there a way to find out how many ESS driven updates to data over a period of time have been done.

Assuming that all end users are accessing the back end via Portal, we figured out the answer.

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

How do i find out how many subscribers i have for my podcast please?

How do i find out how many subscribers i have for my podcast?
Thanks in advance
Brinsley
Leeds - U.K

hey thank you very much for your help!!
At first I didn't get it but now I do
wo00 hoo0!
am so happy right now!!!
n_n

My wife somehow removed the address bar/toolbar from the page - i cannot figure out how to get it back

my wife somehow removed the address bar/toolbar from the page - i cannot figure out how to get it back

In Firefox 3.6 and later on Windows you can hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu on a toolbar.
Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization

In mdx how to get max date for all employees is it posible shall we use group by in mdx

in mdx how to get max date for all employees is it posible shall we use group by in mdx
example
empno ename date
1 hari 12-01-1982
1 hari 13-06-2000
by using above data i want to get max data

Hi Hari3109,
According to your description, you want to get the max date for the employees, right?
In your scenario, do you want to get the max date for all the employees or for each employee? In MDX, we have the Max function to achieve your requirement. You can refer to Naveen's link or the link below to see the details.
http://www.sqldbpros.com/2013/08/get-the-max-date-from-a-cube-using-mdx/
If this is not what you want, please provide us more information about the structure of you cube, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

I have an iBook G4 running on OS X 10.4.11 and I just got a new ipod and can't figure out how to get it updated to be able to sync my ipod PLEASE HELP

I have an iBook G4 running on OS X 10.4.11 and I just got a new ipod and can't figure out how to get it updated to be able to sync my ipod PLEASE HELP

You could go hunting for a fair price on a refurbished or restored Intel-based Mac or MacBook, as most early models of CoreDuo and Core2Duo can run Snow Leopard 10.6.8, and some much more recent.
The Apple Store's Special Deals section that is online has some fairly recent examples of hardware with an OS, original accessories as noted, power cord, and complementary one year coverage. Eligibility for extended AppleCare plans are noted & may be available for various items in the store. Subject to availability. Refurbished. Like new. The price difference can be about the same as the additional two year AppleCare plan may cost, so get that too.
Third party repaired restored or available through other channels vary in quality, quantity, condition, and may be lacking in some or most original accessories; they should include basic hardware as originally equipped and have the boot-install software disc set as intended for that build model & year specification, included.
Auction sites rarely have that much of a kit together, w/ missing discs, scruffy, extra fees, etc. On the other hand, companies that restore and repair Macs for a living and are authorized Apple service centers may have something, if you aren't in the market for something holiday new or really quick. Older models if reasonably refurbished can still shine years later.
Hopefully this helps somewhat.
Good luck & happy computing!

Trying to find out how to get the smallest value in a 2-D array

I figured out how to get the largest and smallest in a 1-D array, but I'm having trouble with the for loop for the 2-D array
I can't seem to figure out how I can get it to check every element in the 2-D array
Lets say I have this array
int[][] aRay = new int[][] {{ 1, 2, 3} , {4, 5, 6 }};and I want to find the smallest value, I think I can figure out what goes in the box of the for loop I just need help with how I can check every element..
Thanks all

Ok so here's what i've got so far and my brain is starting to hurt,
My output right now is "2".. i'm almost there :/ aren't I?
public class bladddhd
     public static void main( String [] args )
     int[][] aRay = new int[][] {{ 1, 2, 3} , {4, 5, 6 }};
          int length2 = aRay[0].length;
          int temp = 0;
          for(int i = 0; i < aRay.length; ++ i)
                    if(aRay[0] > temp)
                         temp = aRay[0][i];
                    for(int j = 0; j < length2; ++j)
                              if(aRay[1][j] < temp)
                                   temp = aRay[1][j];
               System.out.println(temp);

HT203163 I appear to have transferred to the US store and cannot find out how to get back to the UK store- can you help ?

I have managed to get into the US store and cannot work out how to get back to the UK store - can you help?

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region = Change Country / Region

I need to find out how to unblock someone from my email address so they can write me on it again

I hit the word block under the list of choices in the box that shows up next to their email address on the list at the left side of my screen, and the whole box and his email address went away. Now I want him to be able to write me again, how can he? And how do I get his email address to stay back at the list on the left of my screen?

It depends on what email provider you are using (gmail, yahoo, comcast, etc.) Mozilla doesn't provide email, so you'd have to contact your email provider to find out how to unblock them. You can try looking in your settings for a Block list, spam list or Black list, one of those might be where the email address is. But this isn't anything related to Firefox.

I used the chat room to find out how to get an update for auditon 2.0. They said I should use 3.0.

Similar Messages

Maybe you are looking for