I used to be able to change the output to mono regardless of the input I used. Is this still possible in Garageband 10?
I have several speeches recorded in Garageband. I mistakenly created the tracks as two input tracks, but in reality, they were only mono. Previously in Garageband, one could select the inputs for a track even after it was recorded, thus changing a two input/stereo recording into a mono. Now, I do not see that setting at all. I do see the two circles next to the track title on the track itself, but nowhere does it allow me to make a change. Does anyone know whether I can select the inputs for a track after it has been recorded? The Inspector has many different effects, but I am admittedly overwhelmed by the number of them in this case and have not seen one that permits the kind of adjustment I want to make.
Any ideas? (i would rather not have to do something like input them into iTunes in order to manipulate them which I hear might work but is not what I would call an elegant solution to the problem)
Almost immediately after I asked the question, I tried one more option. I created a new track with only one input. I copied my two input track into it and suddenly it was heard in both channels as if it was a mono recording. It did not make any difference which input I had used to record it originally, I tested adding a track with Input 1 and then Input 2 and both behaved the same way.
I realize there may be other ways to do this. Feel fee to add your input.
Similar Messages
-
Hello, Have a question about installing photoshop c6 on a second computer without the access code. Is this still possible?
ThanksOnly if you registered your copy of CS6 with Adobe, in which case you can access your registration and serial number through your account on the main Adobe site, or if you have proof of purchase of a legitimate copy, in which case, unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat.
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation
Otherwise, you are severely out of luck.
All installed applications, such as the one installed on your other machine show deliberately truncated serial numbers for obvious reason. -
I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting
I have an iPhone 4 also. If you are referring to the flyover view, its unavailble for the iPhone4. If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
Hope this helps -
Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e-mail?
You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway... -
Not able to change the password using FNDCPASS
I am not able to change password using FNDCPASS. I am getting follwoing error while executing following command with APPLMGR user ( before that I have source the .env file ) (OS-Linux)
[applmgr@ora11 /]$ FNDCPASS apps/apps 0 Y system/manager SYSTEM APPLSYS WELCOME
Log filename : L2741743.log
Report filename : O2741743.out
APP-FND-01630: Cannot open file L2741743.log for appending
Cause: FDPFOP encountered an error when attempting to open file L2741743.log for appending.
Action: Verify that the filename is correct and that the environment variables controlling that filename are correct.
Action: If the file is opened in read mode, check that the file exists. Check that you have privileges to read the file in the file directory. Contact your system administrator to obtain read privileges.
Action: If the file is opened in write or append mode, check that you have privileges to create and write files in the file directory. Contact your system administrator to obtain create and write privileges.
Can some one pls guide me on thisDuplicate post-
Not able to change the password using FNDCPASS
Please post only once.
Thanks, -
i am not able to change the ip adress as i have changed the network...my old ip adress is been shown....i cant edit it n change it
Manually input your SSID and Password
Settings>Wi-Fi>Other...>Other Network
http://i1224.photobucket.com/albums/ee374/Diavonex/d83f974f.jpg -
Not able to change the roles through the ERM after uploading from ECC
Hi
We are not able to do the following activities after uploading the roles into ERM from Backend system
1) We are not able to see any transaction data but we are able to see org values.
2) We are not able to change the roles from ERM.
Vserion and support pack leavel : GRC5.3 and 13
Please help in this.
Thanks in advance.
With Best Regards,
supportHow are you trying to do this? using oiddas ?
Can you explain more in detail?
Greetings. -
I am not able to change the object after upgrade(SPAU Activity).
HI All,
I am not able to change the object after upgrade(SPAU Activity). Please any one can tell what is the reason with below details.
You are not authorized to make changes
Message no. 37202
Diagnosis
You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
There is also a second possibility:
You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
System Response
Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
Procedure
Comsult your system administrator.
Thanks in Advance,
Mahesh DevershettyHi,
Does the user who would like to change the screen have the authorisation
for S_DEVELOP in his profile? Please run transaction /NSU53 after the
failed authorisation. You will get an information which authorisation
is missing.
Additional please check if you have open entries in transaction SPAU for
that object.
If you couldn´t solve the issue I need an user to analyse it in your
development system.
That user needs all authorisation for development and has to be
registrated as developer.
The system uses the authorization object S_DEVELOP for Workbench objects
can you please check your user master record whether it contains the
required autorization or not.
Please also ensure that modification adjustment is turned on as per note:
197600 Switching the Modification Assistant off and on
Aidan -
my past billing adress of my apple ID is the states, presently i'm in montreal Canada and im not able to change the billing address because my balance is $ 0.68, any idea how can i change it?
You can contact iTunes support and request that they remove the $0.68 from your account here:
http://www.apple.com/support/itunes/contact/
They should respond within 24 hours. -
Not able to change the the Contract Line Item Payer
Hi there,
I am not able to change the Contract Line item Payer and giving an error message '' Credit limit customer differs from credit limit customer in header''.
I checked the credit management assignment and the Business partner is assigned with the required Payer.
Request your help.
Thanks,
RenjithHi Renjith
So first of all check with which customer you have created Contract. So go to CMR data and check wheather you have maintained multiple Payers or not. If not maintained maintain multiple payers.
As you are getting error '' Credit limit customer differs from credit limit customer in header'' , so check the payer at header level and item level also. the payer at header level and item level should be different.
Regards
Srinath -
User should not be able to change the payment terms
Dear All,
My issue is that user should not be able to change the payment terms in any of the document.I have tried to do it through authorization but it is not working out.
Mona.Dear Mona,
This may only be done through SP_Transaction_Notification.
Thanks,
Gordon -
After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
Not able to change the Valuation class of a Material
Hi Team,
I am not able to change the Valuation class of a Material even if the stock is zero.
Please assist.
Thanks in advance.
ChetanHi Chetan,
Please check if any open PO for this Material exist, if it is there, delete it and try to change VC.
Thanks,
Ninad -
Not able to change the price of PO
Hi All,
I am not able to edit the price on PO.
Materail is free text catalog orders from SRM, I am not able to change the price.
Could you please help me in changing the price.
Is there any other steps i need to do to change the price.
ThanksHi there,
Is it greyed out or do you get an error?
Are there any follow-on documents?
Regards,
Matthew -
Not able to change the original system of the object
Hello
BW infosource was created in the system Q01 (test) and transported back to D01 (dev).
I would like to change original system from Q01 to D01 to enable object modification.
I am not able to change the original system of the object in the tran se03 as system is disabled.
Original System Q01 (grey)
Any solution for this ?
thankshi,
before transporting maintain the settings in the Dev system as follows.
Open tcode RSA1 in dev system, from Menu goto -- tools -- Conversion of Logical system Names.
In this maintain the
Original source system Target source system
Technical name of R/3 client of test Technical name of R/3 client of dev system
This setting has to be maintained while transporting the changes to next system, this ensures that the objects are mapped to the correct source system name on importing and are replicated properly from them.
regards,
Arvind.
Maybe you are looking for
-
I just tried sending a email from my iphone this morning and I get the message "Cannot Send Mail, the sender address was invalid" For the past 3 months everything has been fine and mail has been working perfectly. I haven't changed any of the setting
-
Autotype ant task and java source file having method which returns hashmap
Hi Friends, I am using autotype ant task to generate types.xml and supporting java classes. The task is defined as follows . <target name="std"> <source2wsdd javaSource="HelloWorld.java" typesInfo="types.xml" ddFile="ddfiles/web-services.xml" service
-
Troubleshooting ringtone/sounds after 1.0.1. update
I recently update my iphone w/the the 1.0.1 and since then, my ringer has not worked. The other notifications (email, text,etc) do not work either. When i receive an incoming call, my phone only vibrates. My ipod, alarm clocks still function. I have
-
Information regarding ALSM_EXCEL_TO_INTERNAL_TABLE function module
Hi, I am using "ALSM_EXCEL_TO_INTERNAL_TABLE" function module for reading 'XLS' file from client machine into internal table. Now question is "IS there is need of Micosoft office installed on client machine for reading excel file to internal table" T
-
MessageQ for OpenVMS Alpha V5.0-22(RP9)
hi any gurus out there who knows the above topic version MessageQ for openvms alpha, can you share me a simple to understand or not so complex openvms script that can send me alerts whenever there are connection problems with the DMQ endpoints such t