I used to be able to save a thumbnail with my ai files, but now all I get is the AI logo? I want to be able to see what each image is when I scroll thru the finder... so what is going on? What has happened or what changed? I have several on my desktop t
please message me if anyone has an answer. It sucks that I can't find any help at all on this website!
Thanks for replying Larry. Takes a while, but I can see them in Bridge. I have to say that I'm not happy with this though. If I'm working with 10 or 20 or 30 ai files on my desktop, I really want to be able to see them easy as pie. Everything seemed fine in Adobe CC 2014.... but not since this 18.1.1 Sure hope this is just a bug that will soon be fixed! (And if it is a bug, how do I report it and/or get it fixed)? Has anyone else experienced this? Any suggestions?
Similar Messages
-
I use to be able to sign in to itunes store just fine but now I cannot get to the itunes store homepage?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
When the phone is in protection mode lock and comes a missed call .. and when you scroll to the number, the phone call is in safety mode ... I want a solution to this problem .. Thanks
I've tried to respond to your post, but I cannot understand what you are asking. Also not a good idea to post your personal information on a public forum. I've asked the moderator to edit the post.
Now, please explain what safety mode means, and we will try to help. -
I have DOWN LOADED YM TO MY MAC BUT CANNOT GET IT TO RUN OR PUT THE SMILEY FACE ON MY FRONT PAGE IT SAYS IT IN DOWNLOAD FILE BUT THAT ALL I GET PLZE HELP.. i dwn loaded it 2x
but icon say to slide smile face into the square i do that then all disappears
why are thing so diffcult
plze help
this is yahoo messenger im talking about
thanks
georgeokay george, I'll try to help you
1-download yahoo messenger. save the .dmg file to your desktop or downloads, wherever your downloaded files go. Double click on it after it has downloaded and it should open up. (ah, I see-i checked out the youtube video on how to install it). then read the terms and conditions, click on agree, then drag the app (the smiley face) to the Applications folder (the square, as you call it), then it should copy it to the Applications folder. Then right or control click on the open yahoo messenger .dmg thing, and choose Eject, which should eject it into the trash. You are done installing Yahoo Messenger. click your hard drive icon on the right top of your screen and move to the Applications folder. Yahoo Messenger should be there. If you need quick access to it, or use it a lot, you can drag a copy to the dock....
Why are things so difficult? it's good to be curious, george. Might I suggest booking some time at the Apple store, or if you can afford to, pay for some one-to-one training
Using the Mac isn't difficult, but it does take some practise and getting used to
John B -
I am using a 4th gen ipad with an epson Xp400 air printer my ipad was able to find printer but now it cannot. Printer says wifi setup ok. Do not understand why it can't find printer. Never did work right away always have to restart ipad or do wifi setup again on the printer. I am not sure whether os is ..1 or.2 or just 6.0
bump... Anyone have any answers?
-
Hi, I've just appear to have deleted my iphone and now all I'm getting is the Apple icon.
It won't turn off or anything. I have tried holding in the off button and home button together,
but the icon goes and comes back again. It won't connect to Itunes, as the device is not showing
up. Can anyone HELP PLEASE. I think I need to reload Iphone back onto the device.Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414 -
Mal,
You'll need to point to some user database, either the local db on Proxy or an ldap server. The ldap server is the best choice as the local db just stores users in a flat file and becomes unreliable after 1000 entries.
To enable authentication, manage the proxy server instance and navigate to Restrict Access.
From there, turn on access control, and click on the Permissions button. This will open up a new window to allow you to setup your access control rules and restrictions. When you're done, click on Done, apply your changes and restart the proxy server and you should be on your way. -
I have sownloaded an HD movie from iTunes store and when I attempted to play it on my Windows 7 PC a error message popped up saying something about the display not being compatible for HD movies. I have tried changing the display resolution several times but it didn't help. Now it just comes up with a blank screen when I attempt to play it. SD movies work fine. I have the latest version of iTunes installed.
Can anyone help me resolve this problem?Apparently the display is required to be HDCP compatible to view HD movies in iTunes. My display isn't so this is my problem. I contacted Apple support and they have agreed to credit me for the HD movie and I have now downloaded the SD version.
-
My Powerbook won't boot up. I even tried using the start up disk holding down the C key and nothing happens other than I get a solid white power light.
tcoombs wrote:
I just heard skype start up. I think my computer is working, but I don't see any screen. And yes I've checked screen brightness.
It would be helpful to know which MBP you have.
You may have the NVIDIA issue. If you have the 8600 GPU, bring the MBP to an Apple Store or AASP for testing. If Apple's test confirms the issue, repair is free. Read all about it here: http://support.apple.com/kb/TS2377 -
How do I set my ipad back to factory settings? I did what ipad said to do but now all I get when turned on is the itunes icon. I can't do anything on my ipad. Help?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps.. -
When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?
An odd workaround: click "Always" in System Preferences/General/Show scroll bars. The scroll bars will always show, but they won't cover your last file.
See this other post: https://discussions.apple.com/message/20572471#20572471 -
HT2476 apps preview was hang when scroll thru the pdf documents
I have upgraded my mbpro to mountain lion but application "preview" was hang when scroll thru the pdf documents. can somebody help me with solutions?
From the Safari menu bar, select
Help ▹ Installed Plug-ins
Besides the following, what plugins are listed?
iPhotoPhotocast
Java
QuickTime
Shockwave Flash
WebKit built-in PDF (absent in OS X 10.9 and later) -
My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?
Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed. -
Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I have embedded 4 videos on my website. It is a single page, scrolling site. When I scroll down, the videos scroll in front of the top menu bar, instead of behind it. I have tried changing layers, etc., and nothing works. Please help.
Thanks.
Paul W. NormanHi,
Kindly create a new layer, via the Layers panel:
Then, right click on the navigation bar, and choose Move to Layer > Layer 2
Ensure that Layer 2 is on top of the other layers.
Hope it helps,
Sonam
Maybe you are looking for
-
Error while opening list workflow in SharePoint designer 2010
Hi, I am trying to open list workflow in SharePoint designer 2010,its showing me the following page. Please help me how will be able to edit the workflow. While i click on "export to visio",its showing the error as "SharePoint designer encountered an
-
HP C309a All in one Printer - Problems with printing documents the correct size.
Hi I recently purchased an HP 309a as a replacement for an EPSON printer which had to be replaced a couple of times so I thought I would change manufacturer. The HP printer prints well in post places but when I print from Excel on an A4 scale it only
-
I have tried right-clicking and removing the check mark next to the MP3 toolbar but it only lasts for that session. Yesterday I went into the settings and changed Bing for igoogle as my home page. today it's back to Bing. Help please. Paul Sperry
-
Windows formatted ipod question
hi, i've just bought myself a macbook and am wondering if my windows formatted ipod will show up on it if i just plug it in? would i be better to use the usb2.0 or firewire ports to do this? thanks
-
Data Audit is Enabled, why can't users see Cell History in Grids?
As an Administrator I can right click on input data in a grid and select "Cell History" telling me who and when entered data. Our users at Head Office are not able to do the same. They are provisioned to be power users with all entity security but ca