I've been having a problem forwarding ports in my router...

I've been having a problem forwarding ports in my router WRT160N I enable the ports I want to use for my applications, just after clicking save settings I go back to my port's forwarding section and I don't see any application I add being saved. Please help, thanks.
Message Edited by AudioSoft on 04-09-2008 05:31 PM

Might be possible that it will take time to save the settings ... so once you click save settings wait for few seconds ...
Also if it not working ... disable all firewall on the computer & then try to configure the router ...

Similar Messages

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5.

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5. Dont know if I changed settings or something.

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now som

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek Randall

I don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.

Have anyone been having messaging problems since updating to iOS 6?

Since updating my iPhone 4 to iOS 6 i could no longer send pictures to those who did not have an iPhone. Also I can only send pictures to other iPhone users thru iMessage. Another thing, when my iMessage is turned on it send iMessage text from my email address (Apple ID) instead of from my phone number.

Apple are working on it, many people have been having this probleme mainly on 4 an 4s. All you can do is wait for an upgrade, check this link for better battery life http://www.apple.com/batteries/iphone.html or pick up a mophie juice pack.

I have been having this problem since the fourth of this month. I tried to open iTunes and this error came up: "iTunes was not installed correctly. Please reinstall iTunes error 7 windows error 126". If anyone can help I would greatly appreciate it.

I have been having this problem since the 4th of this month. I tried to open iTunes and this error message came up: "iTunes was not installed correctly. Please reinstall iTunes error 7 windows error 126". There is nothing else that comes up but if anyone can help or know anything about it I will greatly appreciate it.

Have you tried google for this Error Message...
http://support.microsoft.com/kb/959077

Has anyone had any luck returning there iMac w/ Lion? I couldn't even reconnect back to the iternet tonight w/o restarting my new iMac.... Looks like folks have been having this problem for months

Has anyone had any luck returning their iMac w/ Lion? I couldn't even reconnect back to the iternet tonight w/o restarting my new iMac.... Looks like folks have been having this problem for months & months .. The Apple tech told me that all I could do is wait for Apple to come up with a fix... Got a new router this week so that isnt' it. Would I be better off w/o this until Apple gets their act together? I downloaded the combo update 10.7.3 & it helped for about a day... yesterday I still had to manually reset the connection but now it's resorting back to disconnectiong w/o fully going into sleep mode first. Sorry to say this is a major lemon. Help!

Seems unfair... I thought I was probalby having a router problem... got a new router this week. Thst's when we realized we have a computer problem. My next door nieghbor got zero sleep staying up all night while trying to help us figure out what the problem could be. He said if it were him he would have returned the iMac / Lion. Got the new iMac w/ Lion for Christmas but didn't realize until this week that Apple is the problem.... Hard to believe that Apple just has kept on selling this like ... oh No problem! Can't stay on the internet... but will sell you another one today! I'm getting mad... It's not every day we spend that kind of money on a computer . & ALL they can give us is that LOUSY Lion combo update. I can't even stay connected long enough to make a vitamin order with Puritan's Pride... & then the disconnection wipes out my cart... so I have to start over. When are they going to fix this! 'Not feeling very positive'. I feel like Apple KNOWINGLY sold my husband a defective... system. 14 days... oh please...

Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

Then the next step would be a restore as new to rule out corruption in the backup.

We have been having a problem with newsletters for a client. The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!

We have been having a problem with newsletters for a client.
The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!
This happened last month too. It seems to be related to length of the newsletter too. It works on every device except iPhones - so weird.

Hi, is anyone else experiencing i-phone only problems on email campaigns? not bashing Apple, just having issues where our newsletter are only having issues on iPhones

My MacBook pro has been having Internet problems after logic board was replaced

I have an early 2008 15.4 inch 2.4 ghz MacBook Pro and just had the logic board replaced because it died on me. Ever since I got my MacBook back I've been having problems with my Internet (wifi). My connection seems to be good I get the full bars but sometimes when I'm browsing it'll take forever to load. The ball just keeps spinning and I have to keep trying to refresh and nothing will load. Other times my Internet works perfectly fine. I don't get an error message about not being connected to the Internet..and I don't think it's a memory issue. Could my logic board replacement somehow be related to my Internet issue?
Anybody ever have this problem?

I would call the facility where your mac was repaired and let them know a new issue that was not present before the logic board replacement is occuring.

Bioshd2..i have been having a problem with this bioshd2 error..no drivers detected..

The comp is an hp 6530f.the first time the prob occured was when my dad unpluged the computer from the surge protecter..upon restart,it just says boot failure insert system disc and press enter.when the comp..was orriginally purchased there was no recovery disc and i never made one.when i do a diagnistic it says bioshd2 error no drivers are detected..i tried changing bios settings and a few other things and nothing.so i turned the comp off and the next day turned it on and it booted up normally.the comp worked fine for about a week then one day my dad moved the comp a few inches to check somthinig behind it when the comp suddenly started to shut down by itself..and when i tried to turn it back on, i got the same thing. bioshd2..idont think my hd is bad because it came back on but what could be causing this problem..i tried alot of different things, even taking the battery out for 12 hours to reset bios and nothing..i left it alone for about a week and when it was turned on again it booted normally.now it is working but im afraid of it happening again..ive looked at all of the wires in the comp and dont see any faulty wires..i checked the power supply because when my dad moved it it shut off so i figured it was that but power seems to be working fine.ive been trying to perminetly fix the problem for weeks now and i dont know what else to check..any help would be awsome thanks.

If the motherboard is touching the case it could cause problems. A short in a wire could cause problems as well.
I don't want to say toss the computer around to see if it happens again, but unfortunately it's one of those things that you might not discover it happens again for another month. At that point you can start with changing out the cabling, it's a rather cheap inexpensive fix, then inspect the motherboard, look to see if there is any point where the board could be making contact with the case.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Hi guys I'm really in need of some help. I have an IMac I3 for a while now I've been having a problem of my machine refusing it shut down , it goes to a blue screen with a spinning wheel but doesn't shut down. And now won't boot from install DvD

Please some one help me ...
A) my mac won't shut down with external HD connected (if it's been used)
B) there are disk permissions that can't be fixed SUID stuff ..
C) I have now verified the Mac HD and it tells me it's corrupt in bold red writing and to start up from install DVD
D) it won't boot from DVD so I cannot run the repair , initially the machine was spitting it out on start up , now it appears to be attempting to boot off DVD , well it sounds like it is .... BUT it's hanging with the Mac Logo and a wheel ... For um .... 30min now...
E) weirdly when OSX is booted off the hard drive , it won't recognise the Install DvD or the applications one... It just spits them out....
I had an old PPC 17" and it was a beaut .... Never had a single problem with it ...
I bought this one December 2010 and it's been nothing but issues for a computer in excess of £1000 I'm extremely disappointed ... And weirdly the shutting down issue started when it was a week out of warrantee ... I feel conned and am almost at the point of throwing it at a wall and buying a PC

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

I've been having a problem with auto-fill in the email on my ipod touch.

I have updated to new email addresses, or accidnetly typed in the wrong on, and now the email addresses won't go away, even though they're not in my contacts. So when i said for instance i want to send a message to [email protected] and it just changed to [email protected], the [email protected] keeps popping up even though i dont need it anymore and it has been removed from my contacts. I have also looked on the internet if any other people have had problems, and they all have had iOS4, and all of them have the same problems except for some, the copybot.com worked, but as well a couple said it did not. I really hope apple updates the software once again and removes the autofill from all email addresses.I have updated the iOS5.1 software, i have the 4th generation ipod touch, and yes i've tried to copybot.com and selected each previous sent email address one by one and restored it, but nothing changed and it wasn't fixed. I have also went into the settings and went to change the auto-correction tab, but that as well didn't work. I dont know if im the only one with this problem, but cant you please help:/ It really is a bother. Thanks(:

I know of no solution except for restorng the iPod to factory defaults/new iPod. Have you made a suggstion to Apple to all resetting email autofill?
Apple - iPod touch - Feedback

TS1398 I have been having network problems on my Ipad and I reset all network settings as advised in the article about problems connecting to networks. Now my Ipad will not allow me to sign onto any network....it will not accept the passwords for any net

My ipad has been a little glitchy for the last couple of weeks....not able to load pages because of DNS lookup failure and really slow loading...some of which has to do with the DSL service I have, but I followed the directions on one of the Apple wi-fi issues pages to reset network all connections..which I did, and now the Ipad cannot connect to WiFi because it will not accept (or cannot resolve..or??) password. I am sure I am typing the password correctly and have tried it on several routers..and it cannot cannect to any router properly even with the correct password. My laptop is connected just fine and it accepts the password and I have confirmed the password with the ISP and tried other routers.
So the question is what should I do if I am entering the right password and the Ipad can't sign itself on to the Wifi network?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Been having iTunes problems for months - now it won't work at all

Hi there,
For the last few months, iTunes has been failing to update (halfway through download it throws up an error saying the update failed. Trying to update manually threw up the errors I've linked to below). So I decided to try to fix it at last, I uninstalled iTunes and tried to reinstall, during the installation I encounter the following error:
http://twitpic.com/9azkja
Clicking "OK" led to a few minutes more of it trying to install itself before this popped up:
http://twitpic.com/9azkmu
"Retry" causes the error to repeat, "Ignore" leads to the installation saying it's successful, yet when I try to launch iTunes, this happens:
http://twitpic.com/9azkpa
Followed by this:
http://twitpic.com/9azkrr
Trying to repair the programme causes the same errors.
I'm running Windows 7 and haven't had any problems with other programmes that I'm aware of although Windows Update has been a bit dodgy for a while (some updates after downloading claim to be installed yet on restart Windows Update still identifies them as due to be downloaded and this process repeats over and over). I haven't made any hardware changes to my system lately and can't think of any software changes around the time the problems started or at all lately. I'm definitely running with administrator privileges.
Any suggestions or advice at all would be very gratefully received.
Thanks,
Steve

Hi Steve,
I can't say I've had the issues myself BUT what I would reccomend is:
1. Completely remove iTunes from your computer and associated registry entries by using a tool such as CCLeaner
2. Make sure you are completely up to date on windows redistributable packages and other updates.
3. Make sure you've selected the appropriate version for your computer i.e. x32 for 32-bit systems and x64 for 64-bit systems.
4. I've just had a quick Google around and as I said above with the redistributable packages in particular look at Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Securty Upfate which can be found here:http://www.microsoft.com/download/en/details.aspx?id=14431
For removing iTunes completely, it may be helpful to read http://support.apple.com/kb/HT1923
For your second error message about the entry point not being found, I found the article https://discussions.apple.com/message/11901253?messageID=11901253&amp%3b#1190125 3 helpful.
Hope this helps,
Kieren (@kierybear)

I have been having an problem recently where my shift key will sometimes type capital Y for o apparent reason, and also my return key will enter a backslash. how can I correct this? it happened to me once before. I had to reinstall clean

Recently my shift key has been for some unknown reason ben typing capital "y" when I use it, and YYI don't know how to stop it. Also my return key has been adding a backslash after the return, and I am unsure how to remove that as well, I had this problem aout 6 months ago, and I had to wipe the drive and do a clean install before it fixed. I would not want to do that again, if at all possible.

Have You found a fix for this(question mark)

I've been having a problem forwarding ports in my router...

Similar Messages

Maybe you are looking for