I've been reading the comments re FCPX on MacBook Pro and now I'm scared. I'm taking a class now and thinking about buying to do videos for nonprofits. Won't be fancy stuff, but now wonder if it's a good choice. Also, heard Apple will drop support. Help?

I've been reading the comments re FCPX on MacBook Pro and now I'm scared. I'm taking a class in FCPX and thinking about buying to do videos for nonprofits. Won't be fancy stuff, but now wonder if it's a good choice. Also, a classmate who was in CA last weekend said he heard that Apple will drop support of FCPX. Any truth? Advice?. I'm on 10.7.4 with 2.4 GHz Intel Core 2 Duo, 4 GB 1067 MHz. Thanks.

dkstj wrote:
Also, a classmate who was in CA last weekend said he heard that Apple will drop support of FCPX.
While it is against the TOU of these boards to speculate on future products/updates what Thomas said is right: FCPX is quite a new product and it doesn't make any sense to drop it now.
The only thing that MIGHT get dropped at a certain point is support for older hardware/OS as FCP X progresses.

Similar Messages

I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.

I got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i c

i got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion
but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
any ideas ?

Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

My Old macbook pro that i bought in 2009. I have broke my screen and havent used it for a while, and now i have found out that i can use a monitor , but i have forgot my password is there any way i can make a new password? Thank you for reading this.

My Old macbook pro that i bought in 2009. I have broke my screen and havent used it for a while, and now i have found out that i can use a monitor , but i have forgot my password is there any way i can make a new password? Thank you for reading this.

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

When printing a signed document with Adobe Reader, the comment icons appear. How do I prevent this

When printing a signed document with Adobe Reader, the comment icons appear. How do I prevent this ?

When printing from Reader, select Document instead of Document and Markups:

Properties: how do I read the comments in it?

I'm using a Properties object to read key-value pairs. But I found I also need to read the comments in the properties file. How can I do that? :)

I think that once you start having that level of detail (eg descriptions) associated with properties, then you should go the XML route.
Property files are great, but for quick control of basically one-dimensional properties. You can use "load" on the file, they're easy to edit in just about any text editor, it's great. But once you need multi-dimensional attributes to the properties, you must use something richer.
If you're writing some kind of Properties file editor -- maybe you're forced to use Properties files for backwards compatibility but you're trying to make them easier to edit for non-techies? -- then you'd skip the Properties.load method, and parse them yourself, with FileReader as yawmark suggested. Of course once you're doing this, you'll be reading both the comments and the properties, and furthermore you'll be imposing some kind of convention ("comments always come before properties, not after", "a blank line separates comments") which can easily be violated, to your chagrin.
I say, either skip trying to read comments, or move up to XML or something, if you possibly can.

HT3910 I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

Hey Stella,
Welcome to Apple Support Communities, and thanks for the question! I'd read through the following article before selling your Mac - it'll include instructions on how to reformat your hard drive:
What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189
All the best,
David

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

My previous method for payment on itunes was debit card but now I dont have one. How do I change to no card without creating a new apple id

My previous method for payment on itunes was debit card but now I dont have one. How do I change to no card without creating a new apple id? It tells me to update payment details when I try to update apps but it only has visa, mastercard, amex and maesto. I dont have any of them. I did previously use visa but I dont have the card anymore and cant get another one. Please can someone help me set it up so I dont need a payment method. Thanks

Thanks for you reply. Is that the only way as it would cost me £15?

I downloaded the latest update on my MacBook Pro. Now I keep getting a pop-up that iCloud wants my password from an email login I haven't had in a year. Now the calendar won't sync with my iPhone5.

I downloaded the latest update on my MacBook Pro last week. Now I keep getting a pop-up that iCloud wants my password from an email login I haven't had in a year. I can't find where to delete that email login. iCloud is also showing my new email login, plus a bogus one I accidentally created trying to fix this problem. Now the calendar on my MacBook Pro won't sync with my iPhone5.

It sounds like you have the Find my iphone Activation lock for sure. Go to www.icloud.com/find and see if you put in that Apple ID that is coming up and yoru password to see if you are able to sign into the account that way to turn it off. If you are unable to, you will have to contact AppleCare by phone (chat cannot handle account lock outs or forgotten password due to not being able to verify your identity) and see if they can reset it. And are you sure the Apple ID that is coming up yours?

Because I can no longer open Adobe files, and have tried all obvious solutions, I've been told to defrag the Intel portion of my MacBook Pro. How do I do this?

Because I can no longer open Adobe files, and have tried all obvious solutions, I've been told to defrag the Intel portion of my MacBook Pro. How do I do this?
I never use the Intel side, and have never partitioned the MacBook Pro.
Message was edited by: MacGirl221b

I never use the Intel side,
Not understood, Intel make the processor that runs your Mac, there is no other 'side' to your Mac.
What Adobe application are you trying to open files with?

I downloaded the new iphoto to my macbook pro. Now when I open it, there is a message telling me that "your photo library is damaged or unreadable and cannot be opened. Please restore from a backup." What do I do I had 16,000 pictures.....PLEASE HELP!!!!!

I downloaded the new iphoto to my macbook pro. Now when I open it, there is a message telling me that "your photo library is damaged or unreadable and cannot be opened. Please restore from a backup." What do I do I had 16,000 pictures.....PLEASE HELP!!!!!

Try download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
At that point, a "Close" button is pulsating blue at the bottom of the window.
Sorry for the tedious detail. Anything revealing there?
Thanks!

How to learn if the security on my 2009 macbook pro has been compromised?

how to learn if the security on my 2009 macbook pro has been compromised?

just my curiosity if there is a way to check this question out?

I've been reading the comments re FCPX on MacBook Pro and now I'm scared. I'm taking a class now and thinking about buying to do videos for nonprofits. Won't be fancy stuff, but now wonder if it's a good choice. Also, heard Apple will drop support. Help?

Similar Messages

Maybe you are looking for