I've been using PScc for 2 months and suddenly when I open a file in camera raw and attempt to use the

radial, graduated and adjustment filters those and all the other options which do work are immediately "greyed out" and I've got to restart the computer to get rid. Assistance would be greatly appreciated. Win 8.1 64 bit

An ACR preference reset may help: Hold Ctrl+Alt+Shift as you open ACR. See video:
How To: Reset Camera Raw Preference File - YouTube
Benjamin

Similar Messages

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

Each camera needs a specific camera raw version (ACR). And each ACR is tied to a specific version of PS. See this list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

I cannot download and then bring up Firefox. I had been using it for months but now when I clik on the Icon I get nothing !

I have been using Firefox for months, but now when I click on the icon I cannot open a page. I tried downloading again but still get tnothing.
I can get on Explore just fine but I want to get back to using Mozilla Firefox.

Nothing is worse than IE.
You can try the following:
Save your bookmarks.html in
%userprofile%\Application Data\Mozilla\Firefox\profiles\
Delete the whole content of the profiles-directory
Then create a new profile and start FF again. Now you can import your bookmarks.
Otherwise look here:
https://support.mozilla.com/en-US/kb/Firefox%20will%20not%20start

I'm having an intermittent problem with my midi controllers triggering Mainstage 3. I'm using a PreSonus Firebox audio interface. It's been working fine for months, but now when I first turn on the computer in the morning , I'm not able to trigger Ma

I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
I’m using a PreSonus Firebox audio interface.
It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard. I tried different midi controllers, different keyboards, different midi cords, and check midi preferences. The audio interface is working fine and is recogonized, but the midi doesn’twork. I re-started the computer several times and then finally it miraculously starts working again.
I’ve been having to this every day now. Any help or ideas is very much appreciated.

I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.

Hi, i have a canon 60d and i have been importing videos from it onto my mac for months but suddenly when i go on image capture or iphoto it no longer allows me to import them help!!!

Hi, i have a canon 60d and i have been importing videos from it onto my mac for months but suddenly when i go on image capture or iphoto it no longer allows me to import them help!!!

Have you launched and tired Image Capture? When it's launched with the iPad connected the photos will display in the window. Select those you want to upload and use the Import to: menu and select Other. Navigate to the Desktop and select the folder you created to hold those photos.

I'm using iphone 4S, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. can someone help.

I'm using iphone 4S and ipad mini, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. Can someone help...
Thanks in advance

Hi Eidda,
This may because the attachment is a winmail.dat file. I would recommend taking a look at the article below for more information. Note: the article is written for OS X mail, but does also apply to this situation.
Mac OS X Mail: What is a winmail.dat attachment?
http://support.apple.com/kb/HT2614
-Griff W.

I edited a .nef file in Camera Raw and PSE 11 saved it as a .xmp file. I cannot open it now.

I edited a .nef file in Camera Raw and PSE 11 saved it as a .xmp file. I cannot open it now.
I am not sure if this is an issue but Windows does not recognize the .xmp file and give it an icon with the photo's picture. On a related note, when I edited some .nef files and Windows saved it as .dng file, it too, like the .xmp file, Windows does not recognize the .dng file and give it an icon with the photo's picture.
Do I need to download something to create this icon?

PSE didn't save your file as an .xmp file. The .xmp file is not the image--that's still the .nef. The xmp file is what adobe calls a 'sidecar' file, just a record of the settings you used in the raw converter. As long as it's in the same place as the image, when you open the nef in ACR again, it will open where you left off, with the settings you chose.
If you want to save as, you have two choices:
1. Click the Open button in the raw converter window and save in the image format of your choice.
2. Use the Save button in the raw converter to create a separate DNG file, which still must be opened in the raw converter and converted to an image format for use in other programs.

Adobe Bridge CC with OSX Yosemite - and i cant open RAW Files in Camera Raw. Does anybody have the same Problem?

If i try to open any File with Camera Raw exactly nothing happens.

What exact camera make and model?
What specific, exact version of Adobe Camera Raw (ACR) plug-in?
What specific, exact versions of Bridge and of Yosemite?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

TS3694 hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regar

hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards

Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.

Hi I have an Ipad 3 (new ipad) and it wont let me open up the screen, it just comes up with'this machine hasnt been backed up for so many weeks, when you press ok, it just stays there and cant do anything else ???

I Have an Ipad 3 and it wont let me open the screen,it just comes up with 'This machine has not been backed up for so many weeks' and when you prsss ok nothing happens, its just locked out ,. Any Ideas ??

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I have been using Firefox 25 from past 2 months and i downloaded firefox nightly yesterday and i used it for yesterday. Today when i open the firefox either the

Hello Support Mozilla,
I use firefox 25 on windows 8 PC and I am using this browser from past 2 months and yesterday I downloaded firefox Nightly and then used it as a browser. Today when I start opening browser then its not opening. Does the both firefox and nightly wont work in a single PC ???? I could use Internet Explorer & Google Chrome browsers, but the firefox browser is not loading.

You need to take care to use separate profiles when using multiple versions of Firefox.
We will need more information about your problem but mean while maybe this general information will help. Besides telling us about any error messages please also say exactly what you have tried; to fix the problem, and whether you now have multiple Firefox profiles set up.
* [[Firefox won't start - find solutions]]

Camera Raw and Photoshop fluctuations

When I open a JPG from Camera Raw and view it in Photoshop I'm noticing that the Photoshop version, viewed at 100%, is slightly darker, viewed side-by-side, than the preview in Camera Raw, also at 100%. Both in the same color space (sRGB).
Interestingly, when I changed the color settings in Photoshop to Adobe RGB and then reprocessed the photo in Camera Raw as an Adobe RGB file and then opened it in Photoshop, the side-by-side comparison shows the Photoshop version as slightly lighter, not darker, than the version shown in the preview window in Camera Raw. Both also at 100%.
Any thoughts on the subject would be very much appreciated. Thank you. Tom
Photoshop CS3
Camera Raw 4.3.1
aluminum imac 17" display, 2.4 GHz Intel Core 2 Duo
2 GB 667 MHx DDR2 SDRAM
Mac OSX 10.4.11

>
Both Camera Raw and Photoshop are using your display profile to make the image preview. If the two don't match (everything matches on my displays) I suspect your display profile is less than optimal.

Why do my raws look different when I view them in Adobe Bridge/Adobe Camera Raw and Canons Digital P

Hello all,
I am sorta new to taking Raw photographs and I have been been using Adobe Bridge/Camera Raw to edit. When I take my photos (I am using a Canon t2i) I have it set to save a raw and a jpg. When I view these images in Adobe Bridge/Camera Raw I notice a clear difference in the jpg and raw (I understand the whole concept behind raw vs. jpg. so im not questioning why one looks different) It is obvious all the adjustments that were applied to my jpg. vs the natural raw. My question is: When I view the same two images in the software that came with my camera, canon digital photo professionals, the canon and raw look almost identical.... My assumption is that canon is applying the same "adjustments" to my raw as it did to the jpgs? Has anyone used these two programs and noticed this?
Thank you in advance for your assistance.
Michelle

Can't say I'm an expert on DPP myself either. I've only run it a few times myself.
If you're seeing Photoshop freeze just by looking at the File Info tab, that's certainly not expected and you should start a tread specifically to discuss that. The forum may be able to help you get that working.
I happen to like the color my camera delivers in its embedded JPEGs (which I use to quickly review shots via IrfanView). Starting with that color in Camera Raw by default just feels very natural and integrated.
Without a specific custom profile to help you with the task, here's my suggestions for the next best thing:
1. Take an image with a range of different colors in it.
2. Open the embedded JPEG also using whatever means you have to do so.
3. Open it also in Camera Raw and make sure you're using the Camera Raw default parameters.
4. Go into the Camera Calibration tab (little camera icon), and choose the Camera Standard profile as provided by Adobe.
5. Tweak the various sliders so as to match the color between what you're seeing in the JPEG and Camera Raw.
6. Save new Camera Raw defaults.
Some notes:
Make sure you leave the White Balance on As Shot, since storing a specific white balance is probably not going to be helpful.
Test your settings and repeat the above to tweak them as needed using other images.
Keep in mind that not every application does proper color-management. IrfanView can be set up to do so, and I don't recall whether you have to tweak a default setting to make it do that or not (it's been a while).
Hope this helps!
-Noel

Why the colors look so different betweet my Camera Raw and Bridge?

We know that after editing images in Camera Raw, thumbnails in Bridge will updated according to the new xmp files.
However, for some of my Raw files, the colors look very different in Bridge after makeing adjustments in Camera Raw, I can see more red in those phoots. But when I reopen the file in Camera Raw, all the colors are just correct.
For those photos without applying xmp files the colors looks exactly the same in Camera Raw and Bridge.
Does this means that my Camera Raw and Bridge use different color space? How can I fix this problem? Thank you

If you want help, you need to specify your platform (Mac or Windows), the exact versions of your Operating System, Photoshop, ACR plug-in and Bridge.
Also look at your Bridge preferences and tell us what you have your Thumbnail preferences set to.
Re-setting your preferences and purging the cache would also help. It could be something as simple as a corrupt cache.
Bridge is Color Managed, but it does not use a color space of its own. It applies the color space with which each image is tagged, it assigns sRGB to untagged files.
When was the last time you calibrated and profiled your monitor?
Details would help.
Wo Tai Lao Le
我太老了

I've been using PScc for 2 months and suddenly when I open a file in camera raw and attempt to use the

Similar Messages

Maybe you are looking for