I've changed iPad carriers but iTunes will not update the carrier settings,

I've changed iPad carriers but iTunes will not update the carrier settings, stating that the requested resource could not be found. Does anyone know how I can download the ipcc file and force an update.

Your iPad may already have the latest carrier settings, especially if you have updated to iOS 4.3.3.

Similar Messages

  • Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps.

    Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?

    So yu tried all of this:
    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    If you had then time for an appointment at ther Genius Bar of an Apple store.

  • I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

    I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

    Well, there is always the possibility that it's been jailbroke, in which case, you're out of luck.  However...
    http://support.apple.com/kb/TS1369
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • My ipod touch is now disabled after entering the wrong passcode too many times.  How do I enable it again - it says "connect to itunes" but itunes will not recognize the ipod because it is disabled.

    My ipod touch is now disabled after entering the wrong passcode too many times. t says "connect to itunes" but itunes will not recognize the ipod because it is disabled.  How do I enable it again?  Thanks!

    iOS: Unable to update or restore

  • ITunes could not update the carrier settings on your iPhone

    When I try to download and install the new carrier settings file, I get the message "iTunes could not update the carrier settings on your iPhone. You do not have enough access privileges for this operation." (I got a similar message when I tried to download and install the OS update.)
    I've been able to work around the problem by creating a different user and installing from there. But I'd like to be able to find and correct the cause of the error message instead of using a workaround. It seems like there's a file or folder somewhere that has somehow become read-only. Does anyone know where iTunes downloads the carrier settings and OS update files?

    Jim VanLeeuwen wrote:
    You will find them in separate folders within your user account Library/iTunes folder.
    That was it. Somehow the owner of ~/Library/iTunes got changed to root.
    Jim VanLeeuwen wrote:
    Have you tried using Disk Utility to Repair Permissions?
    Right after I posted the message I thought that the age-old placebo of repairing permissions might actually fix my problem. Because of your quick reply I found the ownership problem before repairing permissions. So here was the perfect chance for a test. Repair Permissions ran successfully but the owner of ~/Library/iTunes was still root. Repair Permissions fails the test.
    I manually changed the owner to steve and was able to download and install the carrier settings.
    Thanks!

  • Syncing my iPad with my iMac will not update the apps software

    Whenever I sync my iPad Air 2 to my iMac the updated apps on the iMac will not update the apps in the iPad. I have rebooted the iMac and iPad, tried different cords, and checked all settings. All other things in the iPad sync properly.

    Are you using iTunes Match by chance?  I had no problems whatsoever with play counts synching between any of my devices until I started using iTunes Match.  I turned it off and magically my play counts synced.  Once. Hasn't happened again though. 

  • My iTunes will not update the 4.2.1 software for my 3G.

    When I hit the "update" icon, it states that the iTunes software 9.2.1 is up to date, and doesn't update my iPhone's software.
    -Yes, my iPhone is connected to my Mac.
    -iTunes states that there is new software available (4.2.1) for my iPhone 3G.

    No.
    Itunes 10+ requires Mac os 10.5.8 or later.
    You need to update your Mac Os, then you can update itunes, then you can update the iphone.

  • IPod screen says to plug in to iTunes, but iTunes will not read the device and the iPod cannot be restarted by home and lock buttons. How do I fix this?

    The screen shows the usb cable pointing to the iTunes ico. I've tried resetting the device by using the home and lock buttons, but the same screen shows up. Just redownloaded iTunes, but I can't get it to see the device.

    Did you try to connect in recovery mode, explained in this article? iOS: Unable to update or restore

  • I have tried several times to update my iphone 4 with verizon but it will not update the new software

    I have tried several times to install the updates to my iphone 4 with verizon but has been unsuccessful.

    What happened when you tried?
    Error message?
    What did it say?

  • Itunes will not read the ripped CD

    My hard drive crashed. With a new drive,I have now imported all my previously saved music into my Itunes library perfectly. Now, after having ripped a dozen full CD's, the new music has been loaded and can be played, but itunes will not read the titles, artist or the CD title. Only my past music is labeled.

    hi Patricia!
    sounds like the new configuration isn't performing Gracenote queries properly. let's try checking through a few of the usual suspects:
    Scott Patrie, "Can't connect to music store / CDDB", 07:18pm Oct 7, 2004 CDT
    keep us posted.
    love, b

  • ITunes will not finish the restoring process for my iPhone 4s

    So I have been trying to restore my iPhone 4s but iTunes will not finish the process. I have the latest versions in both my phone, iTunes and windows updates... I have restarted the iPhone, the comoputer and iTunes... I'm at a lost on what to do. The phone screen has the plug going toward the iTunes icon but when I do connect it to iTunes it does not restore. iTunes goes through the motions until it gets to "preparing iPHone to restore" after that it just kind of stays there for about half an hour and then it shoot out an error 2003 saying the iTunes couldnt' finish the process... I have all of my firewalls off too... Any suggestions?

    I'd possibly say to check USB connections. Maybe another cable.
    All else fails, you might try to restore on another computer.

  • I have the iPhone 4. I recently switched from PC to IMac. I am trying to sync my iPhone, but iTunes will not let me add or remove anything. Do I need to change a setting since I changed computers? Help!

    I have the iPhone 4. I recently switched from PC to IMac. I am trying to sync my iPhone, but iTunes will not let me add or remove anything. Do I need to change a setting since I changed computers? I try to add songs from my music into my phone section and it will not go... Plus the playlists on my phone are not updated on my iTunes phone on my computer. Its like it never updated. What am I doing wrong??

    Iphone will sync with one computer at a time.
    When you sync to another it will delete the current content.
    Make sure you have copied everything from your old computer to your new one first.

  • HT5704 I have an iPad mini, but it will not let me update. It is saying that I do not have an internet connection, but I am connected to the wifi. I have tried on 2 different wifi networks and I do not have internet service-it's wifi only. How do I update

    I have an iPad mini, but it will not let me update. It is saying that I do not have an internet connection, but I am connected to the wifi. I have tried on 2 different wifi networks and I do not have internet service-it's wifi only. How do I update?

    Please download iTunes from Apple.com and then sync your ipad.After which your ipad will appear on the right hand side upper corner of iTunes.Select your ipad and click check for update,once update has been found click update and follow the steps after that.

  • HT4061 I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

    I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • When my iPod Touch is connected to my Mac, and I select Update to update the software of my iPod Touch, I get a message saying that my iTunes software is current, but it will not update my iPod Touch software.  Is there a bug in the iPod program?

    When my iPod Touch is connected to my Mac, and I select Update to update the software of my iPod Touch, I get a message saying that my iTunes software is current, but it will not update my iPod Touch software.  Is there a bug in the iPod program?

    If you have the first gen ipod touch as your information shows, then you would have to buy a software update:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

Maybe you are looking for