I've changed my keyboard language to a forieng language and when MacBook sleep I could not type the actual password in US language
I've changed my keyboard language to a forieng language and when MacBook sleep I could not type the actual password in US language.. Try alot but no language change key
What language did you change it to exactly?
Similar Messages
-
wireless keyboard won't connect to iMac, when i press the on button the green light comes on and then blinks twice, i can't type my name/password to log in, please help
Impossible, there are zero, as in none, zip, nadda viruses for OS X. If you have viruses on it they are for MS Windows and will not affect OS X. I suspect the hard disk has crashed, if you have backup then it's not a big deal to have it changed, just take it into your local Apple Store or AASP for service. If you have not been backing it up you may be in for a painful lesson on why backup is critical.
-
I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphone 5. I can get connected to other wifi on these features but not with my jetpack. Please help, I need to use this feature soon. Thank you so much
Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect. -
I changed my name on MacBook pro, I could not log in after that though the password is unchanged but tHe name appeared on the login window is the original name?..how I can log in?
Hmmm. Maybe try this?
OS X: Changing or resetting an account password -
I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?
Hello farahani hairon nizar,
If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/HT203828
Regards,
-Norm G. -
Our custom got an error when startup our .NET windows form application.
XXXXX.exe - Common Language Runtime Debugging Services
Application has generated an exception that could not be handled
Process id=0x654(1620), Thread id = 0x5b0 (1456)
Click OK to terminate the application
Click CANCEL to debug the application
If they click on "CANCEL" then following error message appears:
Registered JIT debugger is not available. An attempt to launch a JIT
debugger with the following command resulted in an error code of 0x2(2)
Please check the computer settings
cordbg.exe !a0x654
Click on Retry to have the process wait while attaching a debugger
manually.
Click on Cancel to abort the JIT debug request
We can not duplicate this problem in our development environment and test environment. So, we ask them to uninstall application, .NET Framework 1.1 and resinstall .NET Framework 1.1 and application. They still got same error. We further ask them to install .NET Framework SDK 1.1. They got some detail error message.
[thread 0x840] Thread created.
Unable to determine existence of prolog, if any
[thread 0x188] Thread created.
[thread 0xba8] Thread created.
[thread 0x840] Unhandled exception generated: <0x00c0344c> <System.IO.FileNotFoundException>
_fileName=<null>
_fusionLog=<null>
_className=<null>
_exceptionMethod=<null>
_exceptionMethodString=<null>
_message=<0x00c04cc8> "The specified module could not be found."
_innserException=<null>
_helpURL=<null>
_stackTrace=<0x00c04d2c> array with dims=[156]
_stackTraceString=<null>
_remoteStackTraceString=<null>
_remoteStackIndex=0x00000000
_HResult=0x8007007e
_source=<null>
_xptrs=0x00000000
_xcode=0xe0434fd
Thread 0x840 R 0x00000000: <unknown>
<cordbg>
Looks like the problem is casued by missing component. But we don't know which component missing and how to find it. Is there anybody can give us some clue what we need to check next and what tool we can use to detect missing component.
Thanks!!!!I tried Dependency Walker in our development environment, looks like it's useless for .NE T Window Form application, the result I got is like bellow,
XXXXX.EXE
MSCOREE.DLL
KERNEL32.DLL
USER32.DLL
ADVAPI32.DLL
SHLWAPI.DLL
URLMON.DLL
VERSION.DLL
I know we used some other DLL like Mirosoft Office Object Library, but MSCOREE.DLL (.NET Runtime Engine) covered them. Any other idea? Thanks!!!! -
I've had my iMac put away for about a year, now I can not remember the admin password upon startup. And I don't have the installation cd's (of course)! Is there any way to re-boot, re-do, get into my Mac to change it. I don't remember it even w/ the hint
Call Apple with the Serial and they will send you the ones that came with the Mac. Or search the Net.
-
Facetime Activation: Could not verify the email address. Please re-enter and try again. Tried so many times,even changed my appe ID and purchased a new facetime for iMac running 10.8.4 Mountain Lion,yet still same outcome. Can somebody help me?
I have the same problem. FaceTime works fine on my iMac but when trying to use FaceTime on my Macbook Air, I have the same issue you describe.
-
I was studying in UK for the past 4 years but now I am back in my own country. I want to change the region but it keeps popping out "Could not complete the iTunes Store request. The store may be busy" for the past 3-4 days. Help?
I've got exactly the same problem. I want to download a FREE app from the Hungary app store but my iTunes account is UK based. Very frustrating. Any help would be appreciated.
http://itunes.apple.com/hu/app/hbo/id399598154?mt=8# -
I have just changed my iPad mini password a day ago, and when trying to access it today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct.Additional details:I was last using Kik messenger before it stopped working.I was sitting less than two foot away from the PS3 my brother was playing.I'm 14 but I'm not some spoilt kid who gets iPhones and iPads from his parents to mess around with, I have got important coursework and homeworks on there.Any help would be great Thanks.
Hello ConfusedLlama
If the password is not working to get into your iPad mini, you would need to follow the steps to restore it. If you have a back up through iCloud or through iTunes, you can restore from that back up and it would not bring back the passcode unless it is encrypted.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
-Norm G. -
My iPad downloaded ios 8 and all I get is an unresponsive black screen with the logo. And when I reset it it goes to the page where it says hello in a bunch of languages then I try to configure it and my screen once again goes black. HELP!
Hello Lesliegrande,
Thanks for using Apple Support Communities.
Please follow the troubleshooting in the article below to help resolve this issue where you are unable to update your iOS device.
If you can't update or restore your iPhone, iPad, or iPod touch
Take care,
Alex H. -
Am using short keyboard. Don't know how to create plus sign which is not on the keyboard. There is no number pad. Advice would be much appreciated.
nicholasmitaka-shi wrote:
This is a Japanese kana input keyboard, A1242, whioch looks quite as usual except that a few functions have no space on the board and have been ommitted.
Is the plus sign really not available on your keyboard at the place indicated on this graphic (to the right of the L key)? You might need to use shift or alt/option or shift+alt/option.
http://en.wikipedia.org/wiki/File:KB_Japanese.svg -
The network adapter could not establish the connection after hostname chang
hi all,
my computer name and ip address are changed after it is moved to another location in a local lan network. however, when i tried to connect my database in oralce 11g (enterprise edition) after, i got this error "the network adapter could not establish the connection" (in sql developer)
and "Configuring database with database control requires a listener to be configured in the current oracle home. You need run Netca to configure a listener before you can proceed. Otherwise you may choose to continue with database control" (in dbca when i tried to create a new database). i also cannot access my database in OEM becasue it is still refering to old host name with this error message "Firefox can't establish a connection to the server at...". i changed the old host name to the new host name in files of listener.ora, listener1212114PM3012.bak, tnsnames.ora, and tnsnames1212114PM3012.bak in folder 'product\11.2.0\dbhome_2\NETWORK\ADMIN'. but it didn't work. can anybody pls tell me what do i need to do to fix the problem. i don't want to reinstall my oracle again because i've done a lot of works already in oracle. thanks in advance.
kind regards,
honghi,
C:\>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 12-DEC-2012 11:44
:05
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 12-DEC-2012 11:46
:29
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=pc-412-0.xx.xxxx.xxx.xx)
(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
64-bit Windows Error: 1004: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 2: No such file or directory
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
Then I shutdown it and startup again. The new message is as follows:
SQL> startup
ORACLE instance started.
Total System Global Area 3373858816 bytes
Fixed Size 2180424 bytes
Variable Size 2097154744 bytes
Database Buffers 1258291200 bytes
Redo Buffers 16232448 bytes
Database mounted.
Database opened.
I tried to connect the database again and it didn't work. Thanks.
Hong -
My keyboard does not type the letter p or the number 0 in portrait/vertical position. And when I use the horizontal keyboard from time to time all functions on the bottom row do not work at all like the space bar, return key, etc. It has become a bit of a nuisance. I have just installed the 7.1 update but was having this issue prior. I have also had the glass replaced (not by apple) about a year ago with no issues until now. Is there anything I can do? I have not reset all settings. But I really don't want to have to do that because I doubt it will help.
UPDATE
Called HTC... No help, suggested factory reset ,which I didn't mind as I have no data on the phone yet, after reset must call *228 to reprogram. Did not work. Next suggestion, download a keyboard app, the free ones are crap. Why should I have to pay extra to make the device usable? I thought a working keyboard was apart of the initial $200.
On my own I tried *228 option 2 which is some sort of roaming update. That did not work either. -
I just changed my password in youtube account and now it is not recognizing the new password can someone help?
Well, mobile me was elimated over the summer.
http://www.apple.com/support/mobileme/
Maybe you are looking for
-
Third Party GRN Posting Date to be Copied to Sales Order Line item Billing Date
Hello Experts I have a client requirement where in they want to bill line items in the sales order ( third party process ) to the end customer in sync with the GRN posting dates happened in the PO For EG if GRN happened on 1st July 2014 then Billing
-
Wi-Fi Internet But No Ethernet Internet, Mac Mini
Some time ago, I upgraded the hard drive in my Mac Mini to an SSD. Prior to that, both the Wi-Fi and the Ethernet connections worked fine. Since then, I can get only Wi-Fi to work. If I connect an Ethernet cable, Wi-Fi can no longer connect to the In
-
Summary : WF: PO - Emailing PO's from concurrent program using new workflow
Hi Consultants, We have requirement to send PO - Emailing PO's from concurrent program using new workflow Request details> develop a way to email a PO as a PDF from the reports menu. Currently the PO can only be emailed from the PO approval screen. T
-
Can I access work's windows network from home mac?
Can I use my Mac G4 running OS X Tiger to remote connect to my work pc running XP?
-
Values update in T.Code : KSBT
Hi, I need complete process (Document / details) on how the values updated in t.code : KSBT. Which is required to explain to the end user. Appreciated your quick reply. Regards Aparna