I've connected to the wireless network, but my Ipad still insists I have no internet connection, what can I do?

I've connected to the wireless network, but my Ipad still insists I have no internet connection?
What can I try?

If the iPad insists that you have no Internet connection, why do you say that you've connected to the wireless network?

Similar Messages

My C7280 keeps dropping the wireless network but my C7180 is okay

My C7280 keeps dropping the wireless network but my C7180 is okay both have set IP addresses, both in same room and the C7280 has to be setet to see the wireless. It will work okay all day but the next day it has dropped the network.
Any ideas

What operating system? There is an update for "Windows 7 Critical Update to enhance reliability of network connection", the version for 64 bit Windows 7 is here. If you have a different operating system check HP's download page for your appropriate operating system and look for updates.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Is there a way to configure win 8 Laptop to airport express? I can see theN connection to the wireless network, but troubleshooter suggests there's t

Is there a way to configure win 8 Laptop to airport express? I can see the connection to the wireless network, but troubleshooter suggests there's there is no gateway and of course no internet. The connection
shows limited. Any help you could provide would be most appreciated. Further, should I simply buy another router for the windows machine? If I did that, would it interfere with the airport?

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

TS1559 Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.

Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.

I had the same problem. I did the reset networks on my iPhone & it did not work. My husband read somewhere that changing the channel on the router to manual & selecting the highest available channel number might help. I did that & it solved the problem. I have not had the problem since.

Only a small portion of my photos in Photo Stream on my iPhone go to the cloud then to my iPad. I only have 150 pictuures so it can be a capacity issue?? Any advice ?

Only a small portion of my photos in Photo Stream on my iPhone go to the cloud then to my iPad. I only have 150 pictuures so it can be a capacity issue?? Any advice ?

OK, so it's working the way it is supposed to. With any device that is retrieving photo stream photos from the cloud, it will only retrieve back to the time that photo stream was turned on for that device.
Now that you have it turned on, any photos you take will show up in photo stream for either device from now on.
Hope that helps!
Cheers,
GB

When I have installed updates in the past, I have always lost my bookmarks. Why does this happen? I want to install the new update but I am afraid of losing my bookmarks again. What can I do about this?

When I have installed updates for Firefox in the past, I have always lost my bookmarks. Why does this happen and is there a way to avoid it? I want to install the new update for Firefox but I am afraid of losing my bookmarks again. What can I do about this?

Welcome to Apple Support Communities
Do not worry. Hold Sleep (the button you have at the top of the phone) and Home buttons at the same time until your phone restarts, and then try installing the iOS update again.

MBP+WinXP won't connect to network. It sees the wireless network but stops.

I've been fighting this for two solid days.
Time Capsule takes an address automatically from my router/modem. The MacBook Pro connects wirelessly thru Time Capsule to my ethernet network and the internet. No problems.
Windows XP on the same Mac wirelessly sees the network and reports its name. That's where it stops. The Windows "Choose a wireless network" dialog has the network name highlighted and the annotation, "Acquiring network address", presumably from the modem router. Nothing is happening.
What do I do next? All I want to do is join my existing wireless network from Windows. I have never been offered the opportunity to join it... I assume that at some point I will be required to provide the network WPA/2 password but that never happens.
I am totally bamboozled! The old Airport Extreme BS gave exactly the same problem so I have to assume that Windows is the problem. No, I do not know Windows very well.
BTW, Windows connects to the network and the internet okay via ethernet.

Never mind....
Repeating the same steps over and over I eventually found Windows asking for a network key. I don't have any idea where to get that key, so I provided my wireless network password. That worked. And the MBP+WindowsXP did in fact connect to the internet and my network. Problem solved.
I dare not interfere with anything now because if I mess it up again... I have no idea how I got Windows to ask for the password after sitting there for many many hours stating it simply needed a network address. IT DID NOT NEED A NETWORK ADDRESS — IT NEEDED MY PASSWORD!
I'll never understand Windows. It uses different terminology for everyday items and functions; it's system of step by step support guides suggests moves that don't agree with the Windows dialogs or anything that appears on the desktop.
For me Windows is about the most confusing, hated thing on the planet.

The computer updated the software yesterday but when it restarted there was a white screen. What can I do?

the computer updated its software yesterday but when it restarted there was a white screen.
What should I do?

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)

The MuVo V200 beltclip is a joke, Now I have no player. What Can I

Hello all, I'm very disappointed with the Muvo V200 Beltclip. I have had my Muvo since the 9th Jan 2005 and have been using it all the time and had no problems with it what so ever. But yesterday I had taken my player out with me. I had it connected to the beltclip as always. I had taken my headphones out of my ears when I was asking some bloke a question and did not but them back in till about 0 minutes later. When I put them back in I went to turn my player on, But I could not feel it, I look on my belt and all that was there was the dark grey clip that held the player to the belt. I still had the head phones but they must unplugged when the player fell. I retraced my steps but I had no luck finding my player.
All I have now are the Headphones and a dark grey clip, But looking at the dark grey clip there is a hole at the back, which I think something should have been there.
So as you can imagine, I'm very disappointed. What I would like to ask is, Is the loss of my player covered by the English Warranty?
Because I do believe the Beltclip had failed, letting the player fall from my belt. I done my best to find it, but as I said, to no luck.
All thats left now is the part of the clip and the headphones.
<IMG height=295 src="http://thegooddrmartin.co.uk/images/image.jpg" width=35>
sorry for the poor pic (taken on my phone)Message Edited by DrMartin on 04-04-2005 0:42 AM

On the day it happened I was wearing a shirt that covered the top part of my jeans, So only the headphones would have let people know Im carrying a player, If someone was to take it, the only way to remove it would be to lift it, but I still had the clip part of the holder. If someone did take it by ripping it off I would have known about it.
Ok as for it not disconnecting from the headphones I don't know, My headphones did not fall with it, and I did not feel it falling. What I do know is that I have lost my gig V200.
I will phone Creative first thing Monday, But what I was looking for here was someone who might have had the same thing happen with the V200 or another MP3 player, and did the Warranty cover it's

My deskjet 3050 says it is connected to the wireless network but will not print unless wirelessly

my deskjet 3050 all in one j610 printer will not print wirelessly even tho it says it is connected to the network.
It will only print when connected by usb cable.

Download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My mac is connected to the wireless network, but I still have not internet connection. How do I get the computer to connect

Everytime I move, I have to reset the TCP/IP settings. I am haveing touble getting a router number that area. Can you help?

It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort/Wi-Fi menu bar item to turn AirPort/Wi-Fi off, then on again.
2) Try to select your Wi-Fi network from the AirPort/Wi-Fi menu.
3) In the Network panel of System Preferences delete the AirPort/Wi-Fi item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort/Wi-Fi connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease". Note that the fix this step implements may be temporary.
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Can connect to wireless network but no internet access

I have a PC that runs on Windows Vista and a wireless network using Airport Extreme. My PC can connect to the wireless network but I cannot access the internet. Windows Network Diagnostics states that 'A problem with your network router or broadband modem might be preventing an internet connection'. There should be no problem with my modem as I can access internet using my powerbook. When I run airport utility on my PC, there is an error message that states that 'An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again', 'error -6753'.

I am glad you brought this up. I am having the same difficulty. I run an iMac OS X 10.5.6 with an intel processor and a parallel system to get me on the Windows side. When I try to access the internet using my Airport extreme I cannot access any sites and the internet explorer page pops up with "The page cannot be displayed and sends me to try the diagnose connection problems on the toolbar method. However I can see my base station and all looks fine with the information there. I can also access the internet from my mac side of the computer. It would be nice to use the Windows side to gain access to the net because I have programs for the windows side that need updating. Anyone out there have any suggestions?

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

I don't mean to be facetious but sometimes the simplest things are overlooked. To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open. It also needs to be on the same network. My network is dual band and works with either stream but a friend of mine does not. He has to set the computer and the Apple TV to the same band. Hope this helps.

HT4437 I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

Welcome to the Apple Community Willy.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

I have a Mac OS X 10.6.7 and Firefox 4. Other browser are easily connecting to the net but Firefox. It keep trying to connect to my wireless network but not doing the job. Please give some advice..

This happens when I first start the computer. Sometimes it connects to the wireless network, and during the day is fine.

user8744713 wrote:
I have downloaded Instant Client libraries (basic, SDK and SQL files, named instantclient-basic-10.2.0.4.0-macosx-x64.zip , instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip and instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip ) to Mac OS X 10.6.2 server and unzipped them as instructed in the manual here: http://download.oracle.com/docs/cd/B19306_01/install.102/e12121/inst_task.htm#BABJGGJH
Manual then instructs to run runInstaller command. This command however is not being recognized by the system (' No such file or directory' error is thrown) which to my opinion means one of two things: either command is misspelled in the manual or the command file that runs it is missing. I tried it with or without a dot and slash and in small case letters, nothing works.
When I installed similar libraries on Linux I had no problems but all was required there was to place libraries in the proper directory, no command was required.
Maybe same can be done here as well but I am not sure where to place some of the files. I see .h files that should go to /usr/include but see no .so files that on Linux go to /usr/lib. There are some files with .dylib and other .*lib extensions but I'm not sure if they should be copied to /usr/lib or not. And then there are some other files I have no idea what to do with.
Please help!!!No, you can't just drop a few files into a directory and have a working installation (well, I guess technically you could. But technically you could bail all the water out of Lake Superior with a teacup ...)
Sounds like you've covered PATH and current directory issues. What about permissions? What OS account are you using for this installation? (you should have created an account called "oracle" and made it's primary group "dba"). Does that account have execute permissions?
>
Thanks in advance!
Edited by: user8744713 on Mar 26, 2010 10:17 AM

I've connected to the wireless network, but my Ipad still insists I have no internet connection, what can I do?

Similar Messages

Maybe you are looking for