I've created a key frame effect in FCP but it dissapears along with the moving object in my layer after rendering, how do I fix this?

I'm creating a titles sequence with Final Cut Pro. In two instances I've put an object in the time line and moved it using keyframes and motion. Before I render the file is still on the layer and visible while scanning the footage with the playhead. However as soon as I render the file dissapears while playing. The object is still listed on the timeline, but is basically invisible when I play the rendered footage. This has happened twice on my timeline. I wish I could explain this any better, but to be honest I've never seen this before and I have no better way to describe it. Other than my object just simply disappears after I render it. Hope you can help. Thank you.

You want your scratch disk to be set externally to a drive with a minimum of a FW800 connection.  Is that what you have?  (I understand you moved it during the troubleshooting process)
You haven't turned off Clip Enable have you? Right click the text file and make sure Clip Enable is checked.  Or have you  disabled the track with the green button to the left on the track?
I can't say I've seen this behavior from FCP.  Maybe someone else has and they can shed some light on the situation.
I wouldn't use HQ even for a Canon 5D. I use ProRes(LT)  RED or Arri Alexa now we talking big sensors that would take advantage of HQ.  Assuming that the project will be exhibited on a system that would show you the differences.

Similar Messages

  • Recently, when I create a new album (untitled), it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

    Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

    When a new album is created it will fill with whatever is in the right hand window,  If you're in the Events or Photos mode it will contain all photos in the library.  Yes, strange behavior.
    OT

  • When I import an Album or Folder from my computer that is a Various Artist Album it creates as many albums by the same name as there are songs?  How do I fix this so it is only one Album?

    When I import an Album or Folder from my computer that is a Various Artist Album it creates as many albums by the same name as there are songs?  How do I fix this so it is only one Album?

    Before you begin the import, edit the properties of the tracks to set the Album Artist to Various Artists and Part of a Compilation to Yes.
    For more info. see Grouping tracks into albums.
    tt2

  • I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

    I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

    I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

  • My Macbook air (only 2 months old) has a black screen and I cannot see to get signed on, the keyboard seems to be on as I can see via having put on the Caps key which lights up and also the power cable when connected is at green how do I fix this?

    I have been faced with a Black screen this morning when I have gone to sign in/open my Macbook air this morning.  I can see that the keyboard seems to be on as the caps key when pressed is lighting up as is my charger cable link, however have noticed that the apple logo is not lit up.  Any thoughts?

    Try resetting SMC and NVRAP and then reboot.
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/PH4405
    Try booting the Recovery Partition.  Power off, boot and then hold down the Command and R keys.  Is the screen still black?  If so it is not a software problem so take it in for diagnosis and repairs.  Make a Genius Bar reservation http://www.apple.com/retail/geniusbar/ or find an Apple Authorized Service Provider https://locate.apple.com/country .
    If you are running Mavericks try upgrading to 10.9.2.  It has a fix for black screen problems.

  • After effects does not import video when I direct link from premiere pro.  Why not? how do i fix this?

    I wanted to add some motion tracked text elements into a clip of a interview in my premiere pro cc timeline. I left clicked on the clips that i wanted to "replace with after effects composition".. so i clicked it to and it opens a new comp in after effects.. Only there is no video opened in the comp.. Theres nothing there. I cant figure out why it doesnt bring the video in? Its not in my project panel in ae.. and ive tried direct link by left clicking the clip and going through the menu.. Tried closing AE and then doing direct link. Tried opening AE first and then doing it.. Not working no matter how i try it.  Whats the fix?
    Im using all CC products. Premiere is up to date, after effects is not. I will be updating it to see if that fixes the problem. As soon as I do. I will post a comment as to whether it fixed it or not. In the meantime i could use some help!
    Computer specs:
    Imac
    OS X Yosemite (10.10.2)
    Processor: 2.8 GHz Intel Core i7
    Memory: 16 GB 1333 MHz DDR3
    Graphics: AMD Radeon HD 6770M 512 MB

    *right clicked      
    My bad!

  • I had to get a new keyboard and now the keys in the upper row are not working appropriately. How can I fix this problem?

    My keyboard stopped working so I went to the apple store to replace it with another one. Now I am back home and the keys at the very top are not working correctly (volumn  F12 shows the dashboard, F11 takes the screen up and away, F8 pause button shows spaces, etc.). What should I do to correct this problem - I assume I probably need to download some type of softwear but what? I have a Mac OS X  Version 10.5.8 desktop - 2.66 GHz Intel Core 2 Duo processor.

    All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
    Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
    I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

  • I can't open a document in 4.3 of Pages that I created on the same laptop, with the same software.  Can anyone tell me how I can open this doc without upgrading?

    I'm getting a message saying I need a new version of Pages to open the document.
    How can this be?
    When I click through for more info APple offer me an upgrade at a price of £19.99 and I've read that the 5.2 version of Pages is really glitchy. So, I don't want to do it, but I need to open my document.
    Any ideas?

    You have 2 versions of Pages on your Mac.
    Pages 5.2 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Older versions of Pages 5 can not open files from later versions of Pages 5.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed almost 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Peter

  • I have downloaded Lion to my Macbook, and now I have to keep keying in my serial number every time I restart my laptop or launch my aperture(version3.1.3), how can i fix this this problem.

    I have downloaded lion to my Mac book pro and I have three consistent problems that will not just go away. My aperture keeps asking for my serial number each time I restart my computer or Launch it . How can I fix this problem.

    Have you tried repairing permissions using Disk Utility?

  • I have a sync key, and have a new computer terminal, but when I enter the account details I created, it syncs nothing with my new computer. How do I fix this?

    I have a sync key, and have a new computer terminal, but when I enter the account details I created, it syncs nothing with my new computer. How do I fix this? There is nothing showing up when I sync with the sync key from my old terminal.

    ''NexGenCN [[#question-1038230|said]]''
    <blockquote>
    I recently had to do a wipe on my laptop. I saved the sync key but there was no mention of a sync account prior to doing the wipe. I saved the key and when I did the wipe it asked me to make an account, which I had not done, but now I am seeing no where to put in a sync key code. did they make them unusable now or something?
    </blockquote>
    You are probably trying to use old Sync with Firefox newer than version 29,
    and they did make old Sync unusable on fresh installations of newer Firefox.
    You can uninstall that newer Firefox, then install Firefox 29 from here:
    https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/29.0.1/
    Apply your sync key code, then update that installation to current Firefox,
    then migrate to new Sync:
    https://support.mozilla.org/en-US/kb/how-to-update-to-the-new-firefox-sync

  • Why can't I open PDF files created in Adobe X using Adobe XI? How do I fix this?

    Why can't I open PDF files created using Adobe X in Adobe XI?

    I try and open them in Reader (double left click on the file) and all I get is a single screen with two overlapping frames neither of which have anything to do with the subject although the presentation title is at the top.  One of the frames had "Adobemail.com" on it. Our work computers were recently up-graded to Adobe XI and this was the first time I tried to open a presentation that has worked fine in the past.  I would have thought that Adobe XI would have been backward  compatible, but it doesn't seem so. Any help would be greatly appreciated as I have an 08:00 First-Aid class tomorrow and need this presentation.  Apparently Adobe forums are off-line for up-grades.  Thanks
    [private data removed]

  • DBMS_CDC find only the columns that are changed along with the primary key in the table

    Hello,
    We are having a requirement to find the change data in the production environment.
    We are planning to use the DBMS_CDC utility.
    But for  example in the create change table 1 picked emp_id,ename, address, salary,dob.
    I have a sample data of
    empid
    ename
    address
    salary
    DOB
    1
    test1
    24 test street
    2000
    20-Jan-98
    2
    test2
    25 test street
    2500
    15-Aug-97
    if ename for empid 1 is changed to test1_test3 from test1.
    My CDC is capturing  the values in the old and new values in the 5 columns.
    But i need to get only the empid (primary key of the source table) and the ename column as only that's been updated not the rest of the 3 columns.
    Can i accomplish this.
    Please advice.

    Hello,
    Thanks for the information.
    but if i change the change table  then i will miss the other columns right?
    I want to get the columns( empid and ename) only if ename is changed. i.e when ever any column in emp table changes i need to get all the columns where the data is changed along with the primary key columns empid.
    Is there any way i can tweak the parameters so that i can achieve this or is there any other way using the cdc i can get this data.
    Thanks

  • I have created a document in in design but when i print it out the borders are wrong. How do I fix this?

    I have created a document in in design and have put a border around a photo and text box, but when i print it out the border is not even. How do I fix this?
    Barry

    Hello John, Thanks for replying. I have attached the document as a PDF (is this OK). I have been tasked with designing this certificate for my local RSL sub-Branch for our up coming Centenary Of ANZAC commemorations. As most of what I do has been self taught I’m sure there is a simple answer to my problem. I have adobe CS6. This is how I set the document up. I first used the rectangle frame tool then pulled in a photo from Bridge and faded it.I then did the same with the logo. For the text I used the text frame then used the frame tool twice to form the border and adjusted the thickness. Then I set all of the margins and the document to A4  . When the document is printed it shows even borders of 12mm on the top bottom and right side but the left side is 34mm. I hope this makes some sense to you John.
    Kind regards Barry

  • When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

    When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

    Anyone can help to advice how to solve this issue ?

  • My cursor recently started to dissapear when im not using it but when i press a key it flashes back for a second... how do i fix this?

    Well I'm a frequent Firefox user ad recently my cursor has started to dissapear when I'm not moving it. However when i press a key it flashes back for a second also, when I'm moving it flickers a lot (one moment its there one moment it isn't). How do i fix this?
    == This happened ==
    Every time Firefox opened
    == Earlier today (july 20th 2010)

    Never saw this problem until today, first on Facebook, then on these Mozilla support pages. I had one Firefox window with multiple FB and Mozilla tabs open.
    Here's my observations: On the FB and Mozilla pages, the cursor (arrow/hand) acted identical and as described here, would disappear after 2-3 seconds of inactivity or non-motion, then instantly reappear with mouse movement or key strike but only momentarily if no further motion/action occurred. Interestingly, I also had one FoxNews tab (actually FoxNewsInsider) open, and observed slightly different activity. The Cursor/hand would disappear as described above, but instead of staying invisible, it flashed on /off for what appeared to be <1 second on then <1 second off, until mouse movement or key strike. Now, here's the really interesting part ... When I opened a second FoxNewsInsider tab, the problem corrected itself with no direct action on my part to resolve the issue. I was going to close all tabs, then Firefox and perform the system reboot to correct this annoyance ... but, still have not seen the problem.
    Okay, I'm not going to say viewing FoxNewsInsider webpages not only provides one perspective on news, and the added benefit of fixing cursor/hand problems .. but maybe there's some to being well informed ... Sorry folks, couldn't resist ... :) I will be watching for the disappearing cursor issue again, and will reply here with any updates or changes in my observations.

Maybe you are looking for