I've created a play list on itunes but only want to transfer the play list manually, not sync entire ipod due to large size of itunes file. Playlist is made but I can't seem to drag to the ipod

I've created a playlist for my ipod but want to add it manually instead of using the full sync feature as I have a rather large music file in itunes but am trying to add to a 30 gig pod. How do I do this?

See this article for information on manually managing your iPod's contents.
http://support.apple.com/kb/ht1535
B-rock

Similar Messages

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto?

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto. Thanks

To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.

'Last Played' date does not sync from ipod to itunes

Hi, I've looked through the forums and can't find an answer to this, but apologies if this has already been answered elsewhere.
I'm using itunes 7 with Windows XP and a 20gb 3rd gen ipod. I have a number of smart playlists which are based on the date songs were last played, but recently this hasn't been updated from ipod to itunes. It used to - I'm not sure if the problem has been since I updated to itunes 7 or not, but it might be. Weirdly, the play count - IS updated, so itunes knows that I played the song on my ipod, it just doesn't know when!!
Any ideas?
Thanks in advance
David

This problem is also referenced here:
http://discussions.apple.com/message.jspa?messageID=4149562#4149562
as this may be an iPod issue.

I created a new Apple ID for iCloud on my iPhone, but I can't seem to find a way to "sign out" or "log out" of that Apple ID (for iCloud) to sign in with another Apple ID. The only account login I could change was the Store. How do I "log out"

I created a new Apple ID for iCloud on my iPhone, but I can't seem to find a way to "sign out" or "log out" of that Apple ID (for iCloud) to sign in with another Apple ID. The only account login I could change was the Store.
How do I "log out" or "sign out" of iCloud on my iPhone? There is an option to delete the account, but I just want to log off. I want to keep the account name for future use.

@fernandamagalhaes
It looks like the article below has the information you are looking for.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Turn off iCloud completely
Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
On your iOS device’s Home screen, go to Settings > iCloud, then at the bottom of the screen, tap Delete Account.
Note: If you delete your iCloud account, iCloud will no longer back up your iOS data. You can still back up your device in iTunes (for more information, open iTunes and choose iTunes > Help).
On your Mac, open iCloud preferences, then click Sign Out.
If your Mac has OS X v10.7.5 and you turn off iCloud, your calendar information and reminders aren’t stored locally in iCal. If you want to retain your calendar and reminder information, you need to back it up before turning off iCloud. For more information, see the Apple Support article iCloud: Calendar & reminder data removed from Calendar and Reminders or iCal when disabling iCloud Calendar.
On your Windows computer, open the iCloud Control Panel, then click Sign Out.
Note: If you turned on automatic download of music, app, or book purchases (in iTunes preferences or in Settings on your iOS device), your iTunes purchases are still downloaded to your devices.
Set up iCloud on your devices

I have my home movies on DVD from Windows. I am trying to import them into iMovie but it won't recognize the files. The movies will play on my Mac but I can't seem to import them.

I have my home movies on DVD burned from Windows and am trying to import them into iMovie. The DVD will play on my Mac but I can't seem to import the movie. Can anyone help?

See my post here for how to do this.

HT204291 I had AirPlay setup on my iPad but now I can't seem to play movies from the iPad on our tv. I've checked all connections, restarted iPad and AppleTV but I can't seem to resolve

I had AirPlay setup on my iPad but now I can't seem to play movies from the iPad on our tv. I've checked all connections, restarted iPad and AppleTV but I can't seem to resolve

As the video is downloaded from iTunes it should be in the right format. It could be a DRM rights issue. Watch this video of how to watch DRM iTunes video on a wi-drive via Safari - http://www.youtube.com/watch?v=Ta6cCegKBqQ

I am walking through Apples tutorial getting started with iOS development. I am at the storyboard area and can't seem to drag the cancel button to the green exit. I am not sure why the exit button doesn't except it. Is anyone else having this issue?

I am walking through Apples tutorial getting started with iOS development. I am at the storyboard area and can't seem to drag the cancel button to the green exit. I am not sure why the exit button doesn't except it. Is anyone else having this issue? Is there a work around? I have done this app twice and still cant get the exit to except the Cancel or Done bar buttons

Yes I checked it. As far as I can see I did everything Apple said to do. I took some screen shot so you can see how the screens are connected and what and where the code is, and what it does when I drag the cancel and done bar buttons to the exit

I used to be able to play music and podcasts in a single playlist (with iTunes DJ), but now can't seem to do this. Is there a way around this with iTunes 11?

I used to be able to play music and podcasts in a single playlist (with iTunes DJ), but now can't seem to do this. Is there a way around this with iTunes 11?

You are freaken genius! Apple should update their instructions on how to give playlists, because the old way no longer works. And people tend to give gifts around this time of year. Anyway, mahalo niu loa (thank you very much)!
Doug

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
     boot method: static
     IP address: the address you chose in 7)
     mask: 255.255.255.0
     gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
     click +
     in the add menu click IP
     enter your IP (from step 7)
     make sure the Protocol is IPP
     Name the printer and set its location
     Go to Use field, in the pull down menu select "Select Software"
     Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
     Click +
     Select your printer
     Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done.

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

guess what it says java file. So yes i'm sure. Sarcasm. Not the best way to encourage a total stranger to help you. Then there's
Sorry if i wasn't more clear but was that response needed?No it wasn't needed, but I'm not the one asking for help so I have the luxury of not worrying too much about it. It's extremely frustrating trying to drag relevant information out of someone, and makes one less inclined to bother.
Anyways, there's still nothing in this thread that actually explicitly says "there is a file called VolcanoApp.java in the directory where I'm running javac from" and I really can't be bothered banging my head against the wall any longer. You've made a silly mistake, or a false assumption. We all do it from time to time. My advice is, take a break, go for a walk and re-visit this in a while. You'll probably spot the mistake right away.

I have made a blog in adobe muse and now adjusting it on BC but I can't seem to change the blog post date format?

I have made a blog in adobe muse and now adjusting it on BC but I can't seem to change the blog post date format?
My ideal date format would be / 28, Oct, 2015
can anyone help? I'm not sure I can manipulate the {tag_postdate}

You can use something like this in the post or post list: {tag_blogpostday}, {tag_blogpostmonth}, {tag_blogpostyear}

TS4062 when i connect my new ipad to my computer and open itunes - it's telling me that the device can not open IPAD because it needs Itunes version 10.5 - but i can't seem to find out or download the newest version of itunes on my ipad. Any ideas?

My computer is not reading my new IPAD in ITunes. It's saying i need itunes, 10.5 or higher - but i can't seem to update my itunes on the IPAD - any ideas?

10.5 is NOT software for your ipad. It is the itunes software for your computer.

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

ITunes shows that there are no songs on my iphone but there are 274 songs there. The data storage shows up as "other" on iTunes. I just want to clear the music on my phone but I can't seem to do so. Is there any way to do this?

iTunes shows that there are no songs on my iphone but there are 274 songs there. The data storage shows up as "other" on iTunes. I just want to clear the music on my phone but I can't seem to do so. Is there any way to do this? You used to be able to swipe and delete a song straight from your phone but I can't seem to do that anymore.

That is stealing.

I've created a play list on itunes but only want to transfer the play list manually, not sync entire ipod due to large size of itunes file. Playlist is made but I can't seem to drag to the ipod

Similar Messages

Maybe you are looking for