I've done something and Firefox don't open tabs when I click on the open new tab and when I click on right click there is a lot of options..

Wheb I click right click there's a lot of option, before I use to have just a few. I wish that I can send you a photo how that looks.

You can't attach a screenshot to the first post that starts a thread, but you can do that in subsequent replies.
You can check for issues caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • I have a spinning wheel in Mail - stuck on trying to load a new message. I've force quit both Mail and my whole computer, but when I open mail again, it brings up the same new message - and the side bar curser is stuck in Drafts. What can I try to cancel

    I have a spinning wheel in Mail - stuck on trying to load a new message. I've force quit both Mail and my whole computer, but when I open mail again, it brings up the same new message - and the side bar curser is stuck in Drafts. What else can I try to cancel

    Can you log on to the email account via webmail in a web browser, view the email and delete it from there if necessary.

  • I just updated to Firefox 3.6.12 and now every time I click anything online a new tab opens. How do I return to normal (clicking a link opens it in current page and tab)?

    I'm used to clicking a link on a news story or any searched link on google and having my current page go there. Now my current page stays the same and any link I click opens in a new tab. This is very annoying. I just want my browser to go there.

    Google Toolbar Options, in the Search tab, make sure that '''Enable the Google new tab page''' is check-marked. If that doesn't fix it for you, see this for support information about the Google Toolbar. <br />
    [http://www.google.com/support/toolbar/?hl=en] <br />
    Or visit the Google Toolbar forum. <br />
    [http://www.google.com/support/forum/p/Toolbar?hl=en]
    As far as your UserAgent showing Firefox 3.0.11, see this: <br />
    https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
    You might want to consider getting rid of that '''desktopsmiley''' program that has messed up your UserAgent, it is known as Malware.

  • Firefox always opens with two tabs, one the tab I want, plus an additional tab NEW TAB which I don't want. How can I stop the additional NEW TAB?

    I open Firefox in new windows for sites I want to go to. I don't open in Tabs. Each time I open an new firefox window and when I restore the windows I had open, each site has an additional tab (2-tabs). The first tab is the site I want up the second tab is NEW TAB. I have to go through 10 to 14 Firefox windowe to close each 2nd and additional NEW TAB to individually close the NEW TABS. I had this before updating to the current Firefox and thought upgrading would solve this issue, but it didn't.

    I started in safe Mode. I have the default theme. Starting in safe mode still gave me the same problem. I went back to the normal Firefox and still had the same problem. Yesterday I restarted my computer for 11 Windows updates. I am not going to spend all day starting and restarting my computer and removing my History and whatever else. Firefox should have a direct contact to it's users, to assist them instead of having their users work for them as forum responders and trouble shooters. This has already taken up way too much of my time.
    I will say in normal Firefox the additional NEW TAB had no URL in it, but it did have the 12 icons on the page. In Safe Mode it had a URL that began with Chrome and it had a blank page, it didn't have the 12 icons as in normal mode. I don't have anything Chrome on my computer.

  • Toolbar Not Visible: Had to hide by toolbar and now I can't access it. I don't like the Yahoo Toolbar and I can't get rid of it. I've tried RT DBL Click on the open space which takes me back to Yahoo TB. Can't find

    Had to hide by toolbar and now I can't access it. I don't like the Yahoo Toolbar and I can't get rid of it. I've tried RT DBL Click on the open space which only takes me back to Yahoo TB. Can't find anything in the Computer Controls to address this. Any Suggestions??

    you have a ps cs4 license for mac and you have some way of finding your serial number.
    if yes, download an install the installation file.  if you already have the installation file, what is its name and file extension?  (eg, if it's one file, it should be a dmg file.)
    if you need the installation file,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • My iPhone won't sync and it says that I have to go back to the factory settings. But when I try to do that, I don't remember the password to be able to reset. What do I do?

    My iPhone won't sync and it says that I have to go back to the factory settings. But when I try to do that, I don't remember the password to be able to reset. What do I do?

    http://support.apple.com/kb/HT1212

  • HT201304 I got a magazine subscription and it comes with a digital version I've downloaded the app for it and I want to view it in itunes is that possible as I don't have an iphone or an ipad

    I got a magazine subscription and it comes with a digital version I've downloaded the app for it and I want to view it in itunes is that possible as I don't have an iphone or an ipad

    No, You can only view them on a computer if there is a computer app for that magazine.

  • I have a currently updated Mac that's fast as lightning. I use eBay A LOT. In the newest version when I hit the back button it takes me to the original "new tab" page. Please don't make me use Chrome or Safari, I love you guys

    Hello,
    I have a Mac that's fast as lightning running on the latest version of OS X. I use eBay A LOT. In the newest version of Firefox that I just downloaded when I hit the back button it takes me to the original "new tab" page. Please don't make me use Chrome or Safari, I love you guys

    Thank you for your kind words on the Tablet, as this is the only product mentioned that is supported on this forum, The forums here are for Home Electronics and Computers, and do not reach the Sony smart phone community.
    The Sony smart phone Support Forum is the place for Sony (formerly Sony Ericsson) users from around the world to get help and help others:
    your very in depth suggestions and comments would best be heard at the following forum that is dedicated exclusively to the Sony smart phone community.
    http://talk.sonyericsson.com/community/support

  • I am trying to download a variety of files and when it is finished, the Mac freezes up and the task bar continues to blink on and off. I have to go into Firefox and actually quit the application to continue. Any help is very much appreciated

    I am trying to download a variety of files and when it is finished, the Mac freezes up and the task bar continue to blink on and off.
    I have to go into Firefox and actually quit the application to continue. Any help is very much appreciated.

    are you backing up files, or doing a Time machine backup, either way, the Time machine will STOP when finished and show "last backup at XXXXXX"  meaning its done...... OR if when transferring files, it will show a progress bar on your desktop and vanish when files are copied.
    Open up the Hitachi drive (your G drive is made by Hitachi, and the best made by the way).....and see if the files are there.
    a MORE VISUAL way is to open the hard drive file, and drag and drop files INTO the Gdrive and you can see them visually be copied there as you do it.
    To see your HD on your desktop GOTO  FINDER......PREFERENCES....then GENERAL TAB.........check the box marked HARD DRIVES.........then your Gdrive will appear on your desktop........open it from there,  and DRAG and drop files from anywhere INTO the Gdrive....... easy visual way to see the files being copied into the Gdrive.

  • Firefox hangs and will not allow me to access other programs running when I resize a pop up window, move a pop up window, accidentally right click flash content.

    Firefox hangs and will not allow me to access other programs running when I resize a pop up window, move a pop up window, accidentally right click flash content.
    == This happened ==
    A few times a week
    == Not sure when it statrted

    Hi.
    When this happens, please press CTRL+SHIFT+ESC and see how much RAM and CPU Firefox is using. If they're sky high, then... Well, that kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
    #run Firefox in safe-mode to disable all extensions and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
    #update all extensions and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
    #disable all extensions and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
    #enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. When you encounter the problems, you know you've found a problematic extension, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
    #you're done! You've fixed your problems with problematic add-ons.
    Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
    #do a virus/malware check on your computer. If this doesn't fix it, proceed;
    #disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix you issues with Firefox, proceed;
    #check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
    #check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't do it, I'm out of ideas. Except make sure you've followed my instructions correctly.

  • I got the new 8.0 version of firefox today and now when I put a new URL in an open tab or type a URL in a new tab, NOTHING HAPPENS!! HELP!!!!!

    Since I installed the 8.0 Firefox version earlier today I have been unable to get to new Web pages by typing in their URLs. If I click on a link in a tab which was open before the install ( and was called up by Restore Session after I installed the new version) - say in one of my email messages in the Hotmail tab or a tab with another Web page showing - all is well and I go to the new page. Same if I click on the Back arrow: I can go back and forward to pages which have already been opened in the prior session.
    However, if I type a URL to a new site into the address/location bar, OR open a new tab and enter a URL there ... when I press the Enter key NOTHING AT ALL happens. Same thing if I click on the Go to new address arrow that appears at the right side of the location bar - nothing. This has happened over and over.
    What is going on? If I use IE, everything works just fine, so it must be something in Firefox. Do I need to just go back the the previous version of Firefox which I had before this latest update? As it is now, I can't go to any pages I haven't looked at in my restored session, which is not only frustrating but makes Firefox pretty useless for future use. Or, if it's some other problem, any ideas on what and how to fix it? Thanks.

    '''I fixed mine by removing the Ask.com extension.'''
    Tools
    Add-ons
    Settings icon
    View Recent Updates
    Ask.com '''DISABLE'''
    Running FF 8.0 on Windows 7 (64-bit)

  • When I click a link in a website, it loads in another tab, however i get 100's of new tabs that load with "untitled" and when i close firefox, it just opens by itself again and again

    I was on my son's school website and I was looking to click the link to his teachers personal web-page. When I did, many, many "untitled" new tabs kept opening in the same screen. In fact it did not stop until I restarted my computer.
    When I tried to close mozilla firefox page, it would then open up a new screen again doing the many, many "untitled" tabs. Every time I clicked the red X at the top of the screen, it would load a new page doing this.
    It also did this on one other web page.
    I am sure that there is just some info that needs to be entered for what to do when you click a link, however I have no clue how to change it.

    For the list of teachers there are email addresses in the right hand column, did you click on an email address?
    If you did that could explain the multiple tabs being opened. What may have happened is you have the mailto protocol set to open Firefox which results in 100s of tabs opening when you click on an email address. For details on fixing that see [[Firefox keeps opening many tabs or windows]], in particular the section on "Change the action for a content type". My guess is you will find mailto is set to "Use Firefox".

  • A toolbar called Searchqu got installed in my web browsers.I uninstalled Mozilla Firefox without removing the toolbar and it stopped working saying that can't connect to the server.I uninstalled and installed Firefox but it isn't working.

    A toolbar called Searchqu got installed in my web browsers.I uninstalled Mozilla Firefox without removing the toolbar and it stopped working saying that can’t connect to the server.I uninstalled and installed Firefox but it isn’t working.

    See this thread for potential ways of removing Searchqu from your system: https://support.mozilla.com/en-US/questions/790833

  • It is very annoying when I am at a favourite web site and Firefox will not automatically redirect to another page. It is so continuous and I have to "Allow" through the whole time I am at my favourite web sites

    # Question
    It is very annoying when I am at a favourite web site and Firefox will not automatically redirect to another page. It is so continuous and I have to "Allow" through the whole time I am at my favourite web sites.
    Here is one of those sites:
    http://conservatives4palin.com/

    You can make it automatically redirect by doing this:
    1. Go to: Tools > Options > Advanced > General
    2. Untick the 'Warn me when websites try to redirect or reload the page' option
    3. Click 'OK'
    '''If this was the answer you were looking for, please click 'Solved' -- Thanks.'''

  • Error when trying to access the RBAC User editor and Message tracking

    Hi,
    I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
    I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue. 
    https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
    However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
    the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
    I then checked the event logs on the server and saw the below error logged;
    Current user: 'Domain/Server Services Accounts/administrator'
    Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
    System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
    page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       --- End of inner exception stack trace ---
       at System.Web.UI.Page.HandleError(Exception e)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest()
       at System.Web.UI.Page.ProcessRequest(HttpContext context)
       at ASP.default_aspx.ProcessRequest(HttpContext context)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
    have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
    Any ideas as to what the above event log is specifically referring to?

    Hi,
    From your description, I would like to clarify the following thing:
    If you want to search message tracking logs, the account you use should be a member of the role groups below:
    Organization Management role group, Records Management role group, Recipient Management role group.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

Maybe you are looking for

  • Info records with multiple vendors

    Hello all, I have some info records defined for multiple vendors for subcontracting material numbers. How do I tell SAP to use a specific vendor by default when it creates the Purchase Requisition? Thanks in advance for information.

  • ITunes' Skip Count only works with some of my iPods

    iTunes does not count songs skipped on my 1st generation Nano, 2nd generation Nano, or iPhone. It does count songs skipped during play on my computer or from my 1st generation Shuffle. When I took my 1st generation Nano to the Apple Store they got iT

  • CS4 Extended TOOLS question

    I just bought this version and am confused as to where the extra tools are when I click the little triangle on the tools. There is supposed to be a red eye removal tool on the "healing brush"..but I cannot find it. Where are these extra tools..I thou

  • 10.5.6 and Slim (Full Size) Keyboard

    Since I've installed 10.5.6 (109 MB update), I have lost all connectivity in my Logitech G5 mouse when directly connected to my keyboard's USB port. However, if I unplug the mouse from the keyboard and plug it back in, it recognizes it and it's busin

  • Can't get new logic board hint to work

    after days of trying to resolve my new logic board problem of my time machine back ups not being recognized through using the terminal as suggested, i am giving up for now. i will keep my external hd and the info on it and just back up my important s