I've done something stupid..... again

Hello.
Thank you to all who helped me out very late last night but I now have another question.
By accident I've deleted my "Movies" volume under my home folder. I have created a new one now but I have a blank folder in my side bar which always says "Volume not found" when I try to click or erase it.
How do I remove it and use the newly created folder as the main one?
Many thanks in advance again.
Chris aka Stupid.

Don't worry I just dragged it from the side bar and it disappeared. I kept trying to drag it to trash which just restored it before.
Nevermind!

Similar Messages

  • Help on flashing Bios, b4 I do something stupid again...

    I have the MSI845pe max2 , but the oldest version, version 1.0
    when i look for bios versions on the site i c this:
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=401%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6704%20Ver2.0
    the bios below (3.0) says: cant be used on the 1.0 version
    but can i flash the bios above then (3.1) ?
    help me b4 i do something stupid (again)

    Use only the bios for PCB1.0 here

  • Have I done something stupid?

    I wanted to make a clean install of Yosemite. I had a Bootcamp partition and before reinstalling I wanted to make one single partition on my 3TB fusion drive. Unfortunately the disk utility wasn't able to do this as everything was grayed out. Stupid as I was I erased both partition and now I seem to be stuck in that I can't use the Bootcamp utility to erase the partition nor can I install Windows 7 on it.
    Is there any help?

    Here is the output
    dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *121.3 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         121.0 GB   disk0s2
       3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *3.0 TB     disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:          Apple_CoreStorage                         2.2 TB     disk1s2
       3:                 Apple_Boot Recovery HD             650.1 MB   disk1s3
       4:          Apple_CoreStorage                         42.9 GB    disk1s4
       5:                 Apple_Boot Boot OS X               134.2 MB   disk1s5
       6:          Apple_CoreStorage                         801.4 GB   disk1s6
       7:                 Apple_Boot Boot OS X               134.2 MB   disk1s7
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *2.0 TB     disk2
       1:                        EFI EFI                     209.7 MB   disk2s1
       2:                 Apple_RAID                         2.0 TB     disk2s2
       3:                 Apple_Boot Boot OS X               134.2 MB   disk2s3
    /dev/disk3
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *2.0 TB     disk3
       1:                        EFI EFI                     209.7 MB   disk3s1
       2:                 Apple_RAID                         2.0 TB     disk3s2
       3:                 Apple_Boot Boot OS X               134.2 MB   disk3s3
    /dev/disk4
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS My Passport Pro        *4.0 TB     disk4
    /dev/disk5
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS HD2                    *42.5 GB    disk5
                                     Logical Volume on disk1s4
                                     CD92BD32-A2C4-494F-A4BA-FFC5D5F0F61B
                                     Unencrypted
    /dev/disk6
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS HD                     *3.1 TB     disk6
                                     Logical Volume on disk0s2, disk1s2, ...
                                     059D6078-BF4D-408B-92ED-4D72D7584925
                                     Unencrypted Fusion Drive
    /dev/disk7
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *8.0 GB     disk7
       1:                 DOS_FAT_32 WININSTALL              8.0 GB     disk7s1

  • I've done something stupid with Mail - Please HELP

    Hi,
    While setting up another account I copied the inbox from one to another but forgot to copy the sent items.
    I have retrieved the *.imapmbox folder from TimeMachine and can see sent emails in there etc but when i go to Mail and click Import Mailbox and select Import Apple Mail, I get the error saying that no Vailid applemail files were found.
    I have also tried Files In mobox format and that doesnt work either.
    Any help would be appreciated.
    Thanks
    Gavin

    Thanks for the quick response.
    I have tried this unfortunately but because this was the only account in Mail, time machine will not let me go back far enough, it will only go as far as when I created the new mailbox.
    Gavin

  • HT1338 I have done something so stupid I blush to tell you.I created a Master Password for Fiefox then fogot it.I can reset at the price of losing everything.I guess I've had it,huh?

    I have done something so stupid I blush to mention it.I created a Master Password for Firefox then forgot it. Guess I've had it,huh?

    Yes
    Allan

  • I bought an iphone 5C and my music from my dell laptop doesn't let me sync my music into my phone. When i first bought it I accidentally pressed don't show again on itunes. How do I download itunes 11.1 or later now?

    I bought an iphone 5C and my music from my dell laptop doesn't let me sync my music into my phone. When i first bought it I accidentally pressed don't show again on itunes. How do I download itunes 11.1 or later now?  I have been trying for atleast a month, but I can't find any solutions. I had payed a lot of money on those songs and albums, and now I can't even sync it on to my phone. I know it was stupid of me to press that button, but I need help on trying to get it to sync.  -Mohima

    You need to have the latest version of iTunes on the computer, version 11.1.3 to be able to handle syncing a newer phone with iOS 7. The iTunes on the iPhone has nothing to do with syncing and is installed by the iOS.
    Go to iTunes on the computer, click on Help, Check for updates to update iTunes on the computer, or go to to www.apple.com/itunes/download and download and install the latest version of iTunes to correct your problem.

  • How do I untick "Don't ask again" on Script Stopped Working

    I started getting a pop up telling me something similar to "A script has stopped working, do you want to stop it or continue" with two buttons accordingly. Also there was a tick box saying "Don't show this again".
    I got sick of it happening so regularly and having to tick the Continue button - well it didn't tell me which script had stopped working and I wanted to Firefox to keep working and have all my plugins to continue working so clicked the Continue button, it would be good to know which script is not working so that it might help find out what's wrong and why it's not working... it's like most things that go wrong on PCs, "There has been and error, ---- will now close" Tell us what the error is so that we can report it to the programmers and they can fix it !?!?!?!?!
    Anyway, I ticked the "Don't ask again" and clicked Continue...
    Now Firefox pauses for about 5 seconds and sometimes longer every so often, and occasionally I see what appears to be this warning dialogue box flicker onto the screen for a split second...!?
    How do I untick this box so that I get the buttons back so that I can stop the script working and then I'll be more likely to find out what's making this script not work by some part of Firefox or a plugin then not working and tell someone about it, rather than making things slow down so much...
    I didn't know I had all the plugins listed below installed, where do they come from as I don't remember telling the machine that I've got Netscape- which I haven't as far as I know...?!
    == This happened ==
    Not sure how often
    == I ticked the box telling it not to tell me again and continue...

    reset "dom.max_script_run_time" under about:config
    http://support.mozilla.com/en-US/kb/warning+Unresponsive+script

  • IPhoto has somehow uninstalled itself, or I've done something wrong. If  try to open iPhoto, it gives me this message: "You can't open the application "iPhoto" because it may be damaged or incomplete. I have an iMac OS X. How do I reinstall iPhoto please

    iPhoto has somehow uninstalled itself, or I've done something wrong. If I try to open iPhoto, it gives me this message: "You can't open the application "iPhoto" because it may be damaged or incomplete". I have an iMac OS X. How do I reinstall iPhoto please?

    What is your iPhoto version and how did you install it originally?
    If it came with a new mac and Lion or Mt. Lion installed, you can delete iPhoto from the Applications folder (don't empty the Trash) and download it again from the "Purchased" tab of the App Store.
    If you have bought the iLife CD, reinstall iPhoto from the installation media, after deleting it from the Application folder.
    Or if your Mac came with an older MacOS X, but iLIfe preinstalled, use the system Install CDs,  see Terence Devlin's post here:  Re: My iPhoto isn't working. Error message says "you can't open the app "iPhoto" because it may be damaged or incomplete.
    Regards
    Léonie
    P.S: This may not only be a problem of a broken iPhoto. What did you do, directly before this happened? Did you run a program, that will clean the Mac to save space, like "Clean My Mac" or "Mac Keeper"? These little helpers can be risky and overdo it and remove too much. Then it might be safer to reinstall your system, because other essential files might be missing now.

  • How do I retrieve bookmarks that are deleted when I click onto a bookmark on my iPhone. Ive done something to my iCloud. I haven't backed up my stuff

    Ive done something to my icloud. Every time I click on a bookmark it updates and deletes everything. Everything in that bookmark is lost on my iphone and my laptop. How do I retrieve my deleted bookmarks?

    If you see next to these bookmarks you are in Edit mode and tapping the bookmark will delete it.  If that's the case you need to tap Done to exit this mode.
    If you don't see the symbol, try going to Settings>iCloud, turn Safari off, then after a few seconds turn it back on.  Then test your bookmarks again.

  • Run SQL Agent Job in endless loop(When it's done, start over again)

    Hi All,
    There is an SQL Agent Job containing a complex Integration Services Package performing some ETL Jobs. It takes between 1 and 4 hours to run, depending on our data sources. The Job currently runs daily, without problems. What I would like to do now is to
    let it run in an endless loop, which means: When it's done, start over again.
    The scheduler doesn't seem to provide this option. I found that it would be possible to use the steps interface to go to step one after the last step is finished, but there's a problem using that method: If I need to stop the job, I would need to do that in
    a forceful way. However I would like to be able to let the job stop after the next iteration. How can I do that?
    Thanks in Advance...

    Seriously I cant think of a reason for continuosly running a step like this
    Do you mean you need to keep on polling db for something continuosly ?
    If thats the requirement there's no need of continuosly calling the step
    Instead of that you can include a loop with wait logic to keep on checking for your condition until it satisfies. You can WAITFOR clause for that
    see an example here where I've implemented similar logic in SSIS
    http://visakhm.blogspot.in/2011/12/simulating-file-watcher-task-in-ssis.html
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • I have done something terrible!  nopen up, 'event'  but if I click on them a triangle with an exclamation point comes up.  What have I done, how can I get them back?

    I have done something terrible!  now some of my photos will not open up, I can see them in the 'event' but if I click on some of them I get a gray triangle with an exclamation point.  What have I done and how do I rectify it? 

    The exclamation shows when the file path/link to the original file has been broken.  Apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I have an apple id which I have been happily using to purchase from iTunes and it appears on iPad and iPhone. Now I have done something wrong in iCloud and my mobile me Id comes up on iPhone and iPad so I can no longer purchase. What should I do.

    I have an apple id which I have been happily using to purchase from iTunes and it appears magically on iPad and iPhone, MacBook and partner's iPod touch. Now I have done something wrong in iCloud and my mobile me Id comes up on iPhone and iPad so I can no longer purchase using this and i can't find a way to reset  What should I do? I want to be able to buy apps from iPhone and iPad from this same account and  still synch with my mac book and share with my partner's iPod touch.
    Any suggestions?

    We are users, not Apple. We cannot trace your phone, and neither can Apple.
    Please change every password you have. Posting your email addresses and Apple IDs on a public forum is insane. Hopefully a Mod will edit them out for you.

  • HT1766 i have moved from an iphone 4 to iphone 5 and have done a back up of my iphone 4 and restored this back up to the iphone 5 but the apps do not appear to have come across, have I done something wrong?  Please can someone tell me how to move my apps

    i have moved from an iphone 4 to iphone 5 and have done a back up of my iphone 4 and restored this back up to the iphone 5, but the apps do not appear to have come across.  Have I done something wrong?  Please can someone tell me how to move my apps across?

    After you Restore from backup, sync the iPhone.

  • The restriction code is on my Iphone and I didn't set it up. Could I have done something when tethering the iphone to my MacBook Pro through settings in the MacBook?

    The restriction code is set on my iPhone and I didn't set it up. Could I have done something when tethering the iPhone to my MacBook Pro through settings in the MacBook? I'm a new iPhone user. thanks

    answered

  • When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

    When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

    Have a look at your import setting specifically Store Files:
    Make sure it is set to where you want the originals to go.
    Message was edited by: Frank Caggiano - Don;t empty the system trash. The originals that you deleted from the Desktop are in there and are the only copies you have unless they are still in the camera.

Maybe you are looking for

  • Can you have two different users with itune accounts on the same computer?

    Can you have two different users with separate itune accounts on the same Ipad?

  • How to get Iphone 4 backups

    Okay i have been using a windows computer for the past year and have a number backups for my Iphone 4 on it.. When i connected the iphone to my new macbook pro it asked if I wanted to update the firmware and I chose yes. When the whole thing was done

  • How is the best way to deal with duplicate photos

    I am using a new retina 27" iMac 16gb ram OS X 10.10.1 Aperture 3.6 What is the best way to deal with duplicates that get in Aperture Vaults I have used Gemini and it finds duplicates, but I have no way of telling if the original are still there. I d

  • How would I writ a file to find a playlist named PL-Mix 01??

    Ever since "itunes" quit making available the printing of CD jewel case inserts with their fabulous update of "itunes 11"  I have been looking for other ways to print my song titles and artist for my CD's. I know alot of people are using ipads and ip

  • Rogue AP

    Hi all I work in a company where we rented offices and we offer internet service for all (VOiP and internet). The place where I work has 2 buildings and each building has 2 Cisco WLC 4400. We have about 100 Acces point in total (connected to the WLC)