I've expereinced two "crahses"

I've had mine since last Friday and since that time I've experienced two "crashes" that I will document here (support is welcome).
So my most recent crash happened tonight. Here are the steps the best I can recall.
1. Started playing a song.
2. Opened up the calculator and did a few calculations
3. Closed calculator
4. Tapped on Safari... nothing happend.
At this point I tried tapping other icons, still nothing... I tried to power the unit down and the top button did not respond. Then the screen went dim (but not black) at this point I realized it wasn't coming back on.
I synchronized it with iTunes and the screen went black, then the little apple logo for a long time, then it came back on as normal. This is obviously a bug and I would say a pretty bad one, because if you're on a trip with just your iPod and nothing to sync to then you're out of luck.
I'm not sure what triggered the first crash, but I remember Safari was involved again and it also required a sync with the PC in order to reset the device and get it working again.

Hmmm...well, as an iPhone owner, I know there used to be issues with playing music and using Safari at the same time. The last firmware update or two fixed that problem, basically. I expect the same thing will be done for the iPod touch as well.
Have you reported this problem to Apple? (Talking about it here isn't the same as doing that...not sure if you know this but I thought I'd give you a heads-up about it anyway. If you haven't done so already, I suggest you go here to report this issue to them: http://www.apple.com/feedback/ipod.html
Also, as a general tip...do you turn your iPod touch every night? I dunno if it's really necessary to do this, but I find that my iPhone is okay for about two days straight if I leave it on. And then it starts crashing applications somewhat and acting a bit wonky. So in order to keep the crashing down to a minimum, every night I make a point of clearing the cache and history for Safari, then turning the iPhone off.

Similar Messages

  • Is there a way to open two months at the same time in iCal?

    I have recurring events for every month in 2009 and want to replicate them in 2010. I do not want to just extend the stop date because there will be subtle changes to the 2010 items that I do not want changed in the 2009 versions. I would ideally like to open Jan 2009 and Jan 2010 next to each other and copy the 2009 event to the 2010 calendar (the appointment copy does not copy the recurrence info which is good). Is there a way to show either two instances of iCal running or 2 month windows?
    Thanks!

    Hi,
    If you activate iCal's Debug menu, you should find it has a 'New Calendar Window' option (Cmd-L). It is a bit of a knack to cutting and pasting correctly between windows.
    Best wishes
    John M

  • Can not see two fields in Crystal 2008 Developer explorer/designer view

    I am currently developing crystal 2008 reports against the salesforce.com database using version 12.0.0.683 CR Developer Full version. I am using an updated driver that was provided in July or Aug 08 in order to view self referencing fields. The problem is that when I try and report against one of the tables (lead history) I cannot view two of the fields (New Value and Old Value)? I can see these two field (New Value and Old Value) in the database expert as the last two fields in the actual table, but the two fields are missing when I go into the explorer/designer view. In Salesforce, these two fields can not be filtered on, but I can export all the values in this table using Salesforece Apex data loader.

    Please re-post if this is still an issue to the OnDemand Forum or purchase a case and have a dedicated support engineer work with you directly

  • How to create a report to bring all data from two different Info providers

    Hi All,
    I have a peculier problem while creating a report. I have two custom info providers one DSO and another Cube. There are only two common fields between these two Info providers . I need to create a report such that the report displays all the values from DSO but user can have the selection option on one of the fields in the Cube.
    Here is an example
    DSO Contents:
    DocNum-     DocItem-     DocText-     Amount-      Quantity
    10000----     10----            ABC----          100----           10
    10001----     20----     DSN----     200----     10
    10005----     20----     DSN----     200----     10
    Z1003----     10----     CAN----     500----     1
    Cube Contents
    DocNum-     DocItem-     Date-----          InvoiceAmt
    10000----     10----     1/10/2009----         50
    10001----     20----      2/20/2009----        100
    10005----     20----      2/25/2009----        100
    The report needs to be displayed as shown below when the user selects value for date from 1/10/2009 to 2/20/2009
    DocNum-     DocItem-     DocText-     Amount-      Quantity
    10000----     10----     ABC----     100----     10
    10001----     20----     DSN----     200----     10
    I hope this was clear for you to understand. I would really appricate if any one can answers about how to resolve this problem. I cannot add the date filed to DSO and I also have Doc Num and Item as the user selection fields in the report.
    Thank you all in advance and i would really appreciate for your suggestions.
    Regards
    Chinna
    Edited by: chinna2479 on Mar 3, 2009 7:38 PM
    Edited by: chinna2479 on Mar 3, 2009 7:39 PM

    Hi chinna,
    Two possible options, I can think of now, but both of them may be a compromise with performance.
    1. create an infoset and then a query on top of it, provided we have a one to one relation in both the targets. That is, the combination of doc and item number is not duplicate in either cube or ODS.
    2. Create a master data object of doc and item number and have date as an attribute. Load that from cube data and make date as navigational attr.
    Use this navgntal attr for selection in your report.
    Let us know, if you require any further info.
    Naveen.A

  • HT1386 I have synced the items from itunes to an iphone 4 without problem, except the two albums I just purchased did not sync.  They show up on the itunes on my desktop and on my ipod, but not on the new iphone.  What do I need to do?

    I have an itunes account and an ipod, and when I purchased 2 albums on the computer they synced straight to the ipod.  I bought an iphone and used the usb cord from the computer to it to sync the itunes albums to the new phone.  Everything transfered, and those were albums I had uploaded (not purchased from the itunes store), except the two albmus I just purchased from the itunes store.  They appear on my itunes on the computer and ipod, but not on the iphone.  What did I fail to do or did I do incorrectly?

    This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

  • HT1423 I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

    I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

    I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

  • I am trying to configure two WRV200 from 2 different loca...

    I am trying to configure two WRV200 from 2 different location and ADSL
    accounts. One location has PPPoE and the other has PPPoA. Both of it are
    having a Speedtouch 356 6V modem. The router which using PPPoE and having a DDNS from TZO.com has no problem with the Quick VPN but the router which using a PPPoA connection could not able to connect even the quick VPN.
    There is an option to ridirect the Public IP of Speedtouch to other network device and I manage to configure it and now my router who is having a PPPoA connection has a Public IP. But still the same problem VPN still not working.
    Is there any chance that I could make this router work with the PPPoA connection. I will really appreciate if somebody could help me with this problem.

    Sorry for making you confuse. Here is the VPN log details of the 2 routers.
    Router 1:
    000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
    000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 5s; rekey_fuzz: 100%; keyingtries: 5
    000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+PFS+UP+AGGRESSIVE; prio: 24,24; interface: eth0; 000 "TunnelA": dpd: action:hold; delay:30; timeout:120;
    000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
    000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
    000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
    000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
    000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
    000 #12: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 9s; nodpd
    000 #12: pending Phase 2 for "TunnelA" replacing #0
    Router 2:
    000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
    000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 3
    000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+UP+AGGRESSIVE; prio: 24,24; interface: ppp0;
    000 "TunnelA": dpd: action:restart; delay:30; timeout:120;
    000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
    000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
    000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
    000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
    000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
    000 #3: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 8s; nodpd
    000 #3: pending Phase 2 for "TunnelA" replacing #0
    Hope this could help you.

  • Two intervals in Open and Close Posting Period (OB52)

    What is the purpose of the two intervals (period 1 and period 2) in Open and Close Posting Periods (transaction OB52)?

    Hi,
    Financial statements cannot be prepared on the last day of the accounting period... to find out the correct profit and to determine the correct financial positing... sometimes you may require to make some adjustment  to accounting records after the closing of the accounting year... like adjustments for expenses payable, income receivable, writting off bad debts ...etc. 
    For posting those transactions....period 2 is maintained ..which are also called as special periods... to make the postings in these periods ...special authorisation is required..... 
    Period 1 is for regular postings ...
    Radha

  • Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

    Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
    However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
    What we found from out testing:
    - The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
    - The file can be closed and  Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
    - Also, until the  Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file. 
    Example Scenario:
    - User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
    - Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
    - User 1 saves his file and closes it - but  Dreamweaver is still open.
    - User 2 also saves his file and leaves  Dreamweaver  open.
    - The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
    - If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
    - Same for User 2, he will open 'his' version with 2300 lines in.
    Other information:
    - Files are opened directly from the server
    - Sometimes the users will save incrementally and re-open
    - Most of the time users will save incrementally and keep the files open
    - The users will never not save incrementally and just save when closing the file once finished
    - The users are usually working on the files all day
    - It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
    It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
    Anyone know if this is a known issue?
    Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
    Thanks

    Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
    Mylenium

  • Two resultset objects

    IS it possible to define two resultset objects with two different queries inside the same DB class?java.sql.SQLException: Invalid state, the ResultSet object is closed.
         at net.sourceforge.jtds.jdbc.JtdsResultSet.checkOpen(JtdsResultSet.java:299)
         at net.sourceforge.jtds.jdbc.MSCursorResultSet.next(MSCursorResultSet.java:1123)
         at DB5.getDetails(Daily_Quote_Response_report.java:238)
         at Daily_Quote_Response_report.main(Daily_Quote_Response_report.java:74)
    java.util.List items = null;
            String query;
            String query2;
            try {
                query =
                       "select * from oqrep_except_resp_summary";
                query2 = "select * from oqrep_except_resp_detail";
                Statement state = conn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE,
                        ResultSet.CONCUR_READ_ONLY);
                ResultSet rs = state.executeQuery(query);
                ResultSet rs2 = state.executeQuery(query2);
              //cannot create two rs objects // ResultSet rs2 = state.executeQuery(query);
                items = new ArrayList();Edited by: bobz on 03-Dec-2009 11:16
    Edited by: bobz on 03-Dec-2009 11:16

    Note: This thread was originally posted in the [Java Programming|http://forums.sun.com/forum.jspa?forumID=31] forum, but moved to this forum for closer topic alignment.

  • Field description in two line in ALV report

    Hi ,
    In ALV report I  want the description for each field to be displayed in two lines . For example
    the description for field matnr is " Material No for grade A " which is displayed in one line . But i want to display it as :  Material No
                                                           for grade A
    in two lines . Is it possible . Please help me out .
    Neetesh

    Hi Neetesh,
      Its not possible to display as you like in 2 lines header for single column. But i can provide the alternative way , it won't good logically. Please try the following logic.
    Let suppose you have 10 fields F1-f10. Each field has the 2 lines header. So take 20fields in your fields catalog ie take 10 dummy fields which are equal lenght of the fields F1-f10. and for the last 10 fields(F11-F20) set the row pos as 2, set the second line header to these field(F11-F20). So you will succed to display the 2 level header for single column. But the problem here is you will get one empty row additional row for each row. Because you have taken (F11-F20) fields are dummy and don't have the data also. This solution will works only in the case of ALV List display not in Grid Display.
      But Before that tell to your customer about this problem , Because I have done the same things when my customer giving important to 2 lines header and he accepeted that also.
    If suppose you have the data in 2 lines for each column then this solution will work fine. Thats what i implemented in my ALV Report.
    Warm Regards,
    Vijay.

  • Open Pages doc from server by two persons !!!

    Hi,
    We have noticed that you can open a pages doc from a Apple MAcOS X Server from two diffrent persons, what wil result in not saving any data. Normal you CAN'T open a file that s already open ... !! This is a really big risk .. ?
    What to do about this .. ?

    This is a flaw that has existed since version 1 of Pages. My solution is to work locally and save globally (locked). It is a pain, I know, but it keeps multiple people from attempting to work on the same file at one time.

  • Follow up to Apple TV & TCmuch improved over last two days

    I finally have it working.
    copy a .m4v file internal hard drive to TC at 15.5 M/sec acceptable
    add to itunes library in just a few seconds...
    upload to Apple TV from TC speed is fine, much improved and acceptable, getting peaks of 11.15M/sec
    Capacity on Apple TV shows and is correct
    no dropouts from itunes
    I had to change a few things about my previous network...moved the TC to center of house near open door wall pointing at Apple TV.
    Set TC to N speed wireless at 5 ghz , it will be dedicated to Apple Tv.
    My network is complicated...TC is main router with two Extreme N bridged and one Express along with Vonage, HP USB 24/7, xbox360, e-cable to imac downstairs along with windows notebook.
    Moving all these N + (B/G) extreme N routers towards the outside walls of the house helped also.
    Message was edited by: Smokerz

    Interference was a big issue with all those routers set to N + (B/G) at 2.4 ghz.
    TC is set to N at 5 ghz.

  • Opening and Closing values on two separate rows for an indvidual A/c?

    Hi / Salam To all SAP Members,
    I am creating a COGS report in which i need to show opening and closing values for a stock account in two separate rows. The tool i am using is report painter.
    What i need to know is how can the system identify between opening and closing values for that account? Which characteristic/s do i need to include in the rows? The table i am using is FAGLFLEXT.
    Please provide help.
    Regards,
    Mohammed Ali Khan.

    Resolved Issue.

  • How to enter invoice with two different tax codes in one line?

    Dear friends,
    I have this PO for which I enter the invoice.
    I recieve later a subsequent debit for this PO from the transporter. This subsequent invoice has got extra debits, one with 21% VAT and one with 19% VAT, which means two items with two different tax codes.
    I want to enter this subsequent debit for each item of the PO, and I want to enter both debits in every item of the PO.
    How can I enter in one row in MIRO a debit with two different tax codes.
    Thank you.

    I want in the same line item to enter two tax codes.
    Do you Know if there is any way to do this?
    It is a subsequent debit and it has two items with two different tax codes. I want to enter the subsequent debit for a PO with many items and enter the value of the whole subsequent invoice. So there is the need to enter one line item with two tax codes.
    How can this be done?
    Thank you?

Maybe you are looking for