I've finally found the answer to the freakin' annoying clicking and snapping sou

Here you go the answer to all their problems... no tech willing to give us this answer so here I got it after 5 years :
Get a freakin Motherboard with onboard sound... no more problems! No clicks, no snap... just clear sound.
So far I've tried not only Creative but Hercules, M-Audio (audiophile serie) and of course Sound blaster Li've!, Audigy, Audigy2, Audigy2 Zs... All got a snapping sound so that means the problem is somewhere else : Power supply? Static? I've notice that the problems come when sound output comes to a peak... Anyway... Big relief to watch and listen to music without this drivin' me completly nuts sound!!!!!!!!!!!!! AAAAAAhhhhhhhhhhhhhhhhhh!!!!!!!!!
So long Creative!

do you tried this solution:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=39227
Perhaps this want help you.....
Zyx

Similar Messages

After getting the latest update I recieve an error about MSVCR80.dll missing has anyone found the solution as uninstalling and re installing doesnt work

after getting the latest update I recieve an error about MSVCR80.dll Missing, has anyone found the solution as uninstalling and then installing doesnt seem to work

Doublechecking. Have you tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

HT201406 The Home button on my iPod Touch is very unresopnsive. It takes several tries to activate it. While doing so, it responds to one click vs the intended two clicks and vice versa. It is a very frustrating process. Any suggestions? I tried the

The Home button on my iPod Touch is very unresponsive. It takes several tries to activate it. While doing so, it responds to one click versus the intended two clicks and vice versa. It is a very frustrating process. Any suggestions? I already tried the "shut off" process that was suggested on the Apple site, but that did not help.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I can no longer see the top menu bar in itunes. where you see the status of syncing. where you have the option to click and move a song you are playing to the middle of the song, etc.

I can no longer see the top menu bar in itunes. where you see the status of syncing. where you have the option to click and move a song you are playing to the middle of the song, etc.

It's iTunes screen menubar:

I Just downloaded Dreamweaver CC and it will not open the app., double click and nothing happens?

I Just downloaded Dreamweaver CC and it will not open the app., double click and nothing happens?

What exactly are you double-clicking?
Once software is installed on your computer, you can usually launch by clicking the icon on your computer's desktop. Or by looking inside Start > Programs (Win) or Applications Folder (Mac).
Nancy O.

With the new Yosemite update (10.10.3) I can no longer transfer my photographs into Adobe Photoshop Elements by the previously expedient 'click and drag' method. Neither am I able to import or export them. Does anyone have suggestion on moving them?

With the new Yosemite update (10.10.3) I can no longer transfer my photographs into Adobe
Photoshop Elements by the previously expedient 'click and drag' method. Neither am I able to import or export them. Does anyone have a suggestion as to how to move pictures between the new Photos and Adobe Photoshop?

Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love

I finally found the way to DISABLE the annoying sound effect in Windows

I tried looking around the site for some answers to get rid of the annoying sound effect after a page loads in iTunes 8 on Windows Vista. I have found the answer!
*Vista users:* Right click on your desktop, and then go all the way down and click "Personalize". Then in personalize, click "Sounds". Scroll down until you see the iTunes category. Then simply click the "Page load complete" sound and choose (None) as the sound.
Annoying sound DISABLED.
Hope this helps!

do you tried this solution:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=39227
Perhaps this want help you.....
Zyx

When rotoscoping, how do I delete the background of a video so that when I import it into final cut, the background is transparent and not black or white?

Hello there,
I am new to after effects.
I'm currently working on some footage of a face talking. I have used the rotobrush to single out just the lips moving and have deleted the background. However, when I delete the background it automatically changes the background to a solid black.
The effect i'm looking for is more something of the effect of a PNG in photoshop - no background so that when it is imported into a movie, the lips with be free standing over other footage so that the oner footage will be shown behind the moving image of the lips..
I have looked at multiple tutorials and threads and found nothing that helps with my problem - if there is one, I apologise, I have just spent so long looking and thought here was the best place to come.
If anyone can give me any advice it would be very greatly appreciated - Thankyou!
BJH

First, check to make sure you actually HAVE transparency by doing one of three things: change the comp's background to something other than black, click on the button at the bottom of the comp window to view the alpha channel, or click the button on the bottom of the comp window to reveal the familiar Photoshop checkerboard background.
Next, select a codec that supports alpha channels -- in Quicktime-Land, that would be Animation, PNG or Prores 4444. For FCP, use ProRes if you can.
After that add the comp to the AE Render Queue. In the output module, select RGB+Alpha, Millions (or trillions) Of Colors +, and Straight, i.e. not premultiplied. If you absolutely MUST have audio (I personally have little use for it), check the appropriate check box.
Finally, save the project and hit the render button. DO NOT save the project again after rendering; instead, go file>Revert. That way, if you have one of those Homer Simpson "DOH!" moments where you realize you made a mistake, you simply delete the rendered file, make corrections, and you're all set to re-render.

The curser includes a text box from a previous image or link when the curser is positioned on the side of the page. i click and it goes away but only to return again on the next launched page. how do i get rid of this?

the cursor includes a text box from a previous image or link when the cursor is positioned on the side of the page. it will mainly happen when i hit "back" from the page i was on. i click and it goes away but only to return again on the next launched page. i also keep several tabs open and it will carry over to any one of them i go to. how do i get rid of this?
== This happened ==
Every time Firefox opened
== when i upgraded to most recent version 3.6.8

A number of extensions can cause that problem, you'll need to do a little troubleshooting to find out which extension is causing that to happen for you.
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

How can I limit the run time of my VI so that it starts when the arrow is clicked, and stops automatically when a specified time has elapsed using Labview 7?

I can't seem to find the proper tools to do this. Any help would be greatly appreciated. Thanks in advance.

I'm guessing that you're running something in a While loop, so you should be able to stop whenever you want.
In LabVIEW 7, there is a new Express VI on the Time & Dialg palette named Elapsed Time. You specify the time you want, and it generates a boolean True after that amount of time has passed. Just connect this boolean to the Wile loops conditional terminal, either directly or "OR" it with a stop button so you can stop it yourself if needed.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

I finally found the answer! (Using calender and contacts)

I had my ipod for 9 months and the contacts etc. always baffled me. I read the help but as ignorant as i am i did not understand. (However i have qualifications in IT!) Anyway i thought i'd write a post to help those in a seemingly esay way to understand. For windows.
1. Connect Pod.
2. Open my computer and go to Pod drive.
3. There are 3 folders, contacts, calenders and notes - im sure you know.
4. Open Microsoft Outlook. Make a contact but when you save as: - save it as a Vcard (option below name in list)save it outside the 3 folders. Then drag it into the contact folder with mouse.
5. For calender save as icalender.
6. For Notes save as txt and create in Notepad.
I know i'm probably repeating things already said but i think it would have helped me. Maybe it'll be useful.

Lou, THANK YOU!
Thanks For Letting "ME" know that I could Do My Contacts With Microsoft Outlook.. I never Knew..
"I know i'm probably repeating things already said but i think it would have helped me. Maybe it'll be useful."
Really Usefull And Helpfull.
M.

HOW can I FIX Mavericks and Safari 7.0 to allow Gmail to work? Gmail has been FUBAR'd since downloading Mavericks today. Finally found the brute-force logout site to just getr logged out; can't keep doing that. Other features no longer work, either.

Made big mistake of downloading Mavericks today.
Been struggling with all the FUBARd messes it caused, ALL DAY.
Google basic buttons don't work--can't log out or other basic functions.
Website use is impaired.
It took almost 3 hours to do a basic online order on one of them--at this rate, I'll be out of business soon, and it's seriously impairing Christmas preparations!
Google Voice/Video are screwed up, had to RE-download their voice/video plugin all over again--again.
Voice/video quality is REALLY poor.
Lag times in so many things are bad.
Thought this would download WITH the better writing/bookkeeping programs--NOT!
Mac Maps is piddle compaired with GoogleMaps.
The Email program on the desktop is REALLY hard to use, has few useful functions. It's MAYbe good if one only has ONE email; using it with severeal various email accounts is a serious liability in many ways--like filing, sorting, marking, etc.; no clear way to move email files to an external drive to save, to unload the HD.
HOW can Safari and Mavericks be fixed?
IF not, HOW can I REMOVE Mavericks and get back to Mountain Lion--which was not too great, but certainly more functional than Mavericks!
I NEED my web-based emails to work--NOW...NOT when Mac finally gets around to fixing things sometime later.
I NEED online ordering to work--NOW--not later when Mac finally gets around to fixing things.
PLEASE someone--any help out there? I couldn't even find but a rare hint that Safari 7.0 even exists--much less that anyone admits it's got problems, nor fixes for it.
What to do? Throw the whole unit out? Wipe and reboot? Dumb it back to OS 10? HOW? WHAT?
[freaking out here...]

Zak Adelman, LexSchellings,
It's a shiney new computer. Came loaded with Mountain Lion.
Too busy learning to use the blessed thing, to download anything....except...
The only pluggin that had to be loaded, was Google Voice-Video pluggin, while Lion was still it's OS. [AND been using the Safari that came already in it.]   Had to do that a couple times--nothing new there--that plug-in had to be re-loaded when using a PC, too--THAT happened even before Google slammed everyone into coerced use of it's Google+.
    [I understood from others, that Firefox won't work in Mac units--or I woulda put that in it to see if that solved anything]
This unit seemed a bit sluggish from the git-go, out-of-the-box.
I figured that was probly the local DSL here---rural DSL is...um...our DSL's not something to brag about, but it's the best we can do...
The difference between speed of loading pages, etc. on the new Mac, was --not-- toooo terribly different--though yes, slower on Mac....and chalked it up to my inexperience with Mac.
Been trying to get things up and running for a bit over a month now.
NOT doing very well at it--just barely getting by; rapidly falling behind what needs done [work].
Google worked just --OK-- when OS was Lion, as did the Google voice/video--slower, and voice-video was kinda scratchy or glitchy, but worked enough to --get by--.
Loading Mavericks, ruined that.
VOIP calls via Google talk have bad echio, static, cut-outs; video calling was pixilated or not working; WAS cued to re-load it's Voice-Video plug-in....which seemed to help a bit, though not very well; it only helped the Voice-Video some, not all--figured that was probably Google issues, less than Mac's, since Google has been increasingly dysfunctional as they have twisted it to be a social media-dominant thing.
[[now seeking an email venue that does what Gmail was good at, including the Voice-video calling, that has no intention of turning itself inside out to be "social"]]
Can't sign out of Gmail or Google+, nor use buttons in upper right corner with the drop-down menu.
NO buttons in upper right corner cluster on Gmail work, except the name+ button to toggle over to Google+---which I don't need! [yeah--THAT's a Google problem!]
Can only switch to HTML version by catching that button as the account signs in--if one fails to be fast enough with their fingers, it goes to Google+; can't get to email unless type in mail.google.com.
Managed to catch that button today, and clicked to use HTML "permanently" until these issues get solved.
ALSO:
Have fairly new [about 1 year?] HP bluetooth printer-scanner.
BUT, after Mavericks loaded: it HAS the unit listed, HAS drivers for it, HP unit IS listed as default printer, everything --seems-- "go",
.....except Mac keeps posting it's out of ink, and/or, not hooked up, and/or not turned on--even when it is on.
It's SUPPOSED to be blue-toothing that printer/scanner.
It did it for Lion, before loading Mavericks, even though it was troublesome to get it to work, it at least HAD printed one document when Lion was the OS.
Thank you...Downloaded EtreCheck:
BTW: Trying to copy/paste data from that check list, to this post, was achaic:
had to use Edit, select all, then use edit again to get it pasted--the mouse buttons weren't allowed to copy-paste using right-click functions [is this a relic limited-function "thing" with Mac?, or is it because I wanted to keep using this new wirless, non-Mac mouse?].
Advice?
See below...
Hardware Information:          Mac mini (Late 2012)           Mac mini - model: Macmini6,1
              1 2.5 GHz Intel Core i5 CPU: 2 cores;           8 GB RAM
Additional:
   Monitor used = Visio flat screen. [not Mac]
   Keyboard = Logitech solar wireless [not Mac]
   Mouse = Logitech wireless
Video Information:           Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
          OS X 10.9 (13A603) - Uptime: 2 days 19:33:25
Disk Information:
          APPLE HDD ST500LM012 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (456.94 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          MediaTek Inc MT1806
          Logitech Logitech USB Headset
          Logitech USB Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.google.keystone.daemon.plist
Launch Agents:
          [loaded] com.google.keystone.agent.plist
          [loaded] com.hp.devicemonitor.plist
          [loaded] com.hp.messagecenter.launcher.plist
User Launch Agents:
User Login Items:
          iTunesHelper
          SpeechSynthesisServer
3rd Party Preference Panes:
          Flash Player
Internet Plug-ins::
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
          o1dbrowserplugin: Version: 4.9.1.16010
      ====== npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 ===[this was in red]=====
          googletalkbrowserplugin: Version: 4.9.1.16010
Bad Fonts:
          None
Old applications:
          HP Device Monitor:          Version: 2.7.0 - SDK 10.5
                    /Library/Printers/hp/hpio/HP Device Monitor.app
Time Machine:
===      Time Machine not configured! ===[this was in red]===
Top Processes by CPU:
               6%          WindowServer
               4%          Safari
               4%          SafariDAVClient
               2%          EtreCheck
               0%          com.apple.iCloudHelper
Top Processes by Memory:
          303 MB          Mail
          270 MB          Safari    ======[this is version 7.0 ]======
          262 MB          mds_stores
          147 MB          softwareupdated
          147 MB          com.apple.IconServicesAgent
Virtual Memory Statistics:
          1.77 GB          Free RAM
          2.85 GB          Active RAM
          2.36 GB          Inactive RAM
          1017 MB          Wired RAM
          4.64 GB          Page-ins
          111 MB          Page-outs

HT2433 Whilst using my Macbook Pro 15 inch (2008) model I´ve found that sometimes, whilst working in photoshop or final cut - the computer switches off and I get a blank screen. I have saved the error message. Does anyone have an idea of what is going o

This is the error message:
Interval Since Last Panic Report: 40328 sec
Panics Since Last Report:          1
Anonymous UUID:                    5E889A13-BFD5-45E1-B98C-5F3F1FB23C33
Tue Feb 4 20:52:34 2014
panic(cpu 3 caller 0xa01c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0x7fa45000 0x0a5480a2, D0, P3/4
Backtrace (CPU 3), Frame : Return Address (4 potential args on stack)
0x5c85a458 : 0x21b837 (0x5dd7fc 0x5c85a48c 0x223ce1 0x0)
0x5c85a4a8 : 0xa01c9b (0xc1728c 0xc87800 0xc25e60 0x0)
0x5c85a548 : 0xb1c608 (0x8c16c04 0x9499004 0x100 0xccff02)
0x5c85a598 : 0xb13601 (0x9499004 0x100 0x5c85a5c8 0x9f1778)
0x5c85a5c8 : 0x16f59a6 (0x9499004 0x100 0x438004ee 0x0)
0x5c85a708 : 0xb3b2b5 (0x9499004 0x912f004 0x0 0x0)
0x5c85a748 : 0xa0ae7c (0x9499004 0x912f004 0x0 0x0)
0x5c85a7e8 : 0xa0755b (0x0 0x9 0x0 0x0)
0x5c85a998 : 0xa08af9 (0x0 0x600d600d 0x704a 0x5c85a9c8)
0x5c85aa68 : 0xcbd8ff (0x5c85aa88 0x0 0x98 0xee79b00)
0x5c85ab28 : 0xcc31bb (0x9648c04 0x0 0x5c85ab58 0x504ded)
0x5c85ab68 : 0xcdf4e0 (0x9648c04 0xf6078e8 0xef72dc0 0x506ad1)
0x5c85ab88 : 0xcd1b7f (0xef72640 0xef61800 0xf3f6a04 0xcad5f6)
0x5c85abb8 : 0x56deb8 (0x463cc000 0x15 0x5c85abe0 0x5c85abe4)
0x5c85ac38 : 0x56e272 (0xd29900 0x463cc000 0x9f7dc88 0x1)
0x5c85ac88 : 0x56eb59 (0x463cc000 0x1e 0x5c85acd0 0x0)
0x5c85ada8 : 0x286638 (0x463cc000 0x1e 0x9f7dc88 0x1)
0x5c85be58 : 0x21dbe5 (0x9f7dc60 0xf83f5a0 0x1fb588 0xb603)
0x5c85be98 : 0x210a86 (0x9f7dc00 0x0 0x9cc3f50 0xe44e8c0)
0x5c85bef8 : 0x216f84 (0x9f7dc00 0x0 0x0 0x0)
0x5c85bf78 : 0x295c57 (0xdf90208 0x0 0x0 0x0)
0x5c85bfc8 : 0x2a256d (0xdf90204 0x0 0x10 0x8ea8284)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0xc89000->0xd3ffff
            dependency: com.apple.NVDAResman(6.4.0)@0x99b000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x98e000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x955000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x96c000
         com.apple.nvidia.nv50hal(6.4.0)@0x15bf000->0x19d3fff
            dependency: com.apple.NVDAResman(6.4.0)@0x99b000
         com.apple.NVDAResman(6.4.0)@0x99b000->0xc88fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x955000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x98e000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x96c000
BSD process name corresponding to current thread: plugin-container
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 1520850684298
unloaded kexts:
com.apple.driver.AppleUSBUHCI    4.2.0 (addr 0x145a000, size 0x65536) - last unloaded 159943879609
loaded kexts:
at.obdev.nke.LittleSnitch    2.3.09
com.apple.driver.AppleHWSensor    1.9.3d0 - last loaded 17673840711
com.apple.filesystems.autofs    2.1.0
com.apple.driver.AGPM    100.12.31
com.apple.driver.AppleMikeyHIDDriver    1.2.0
com.apple.driver.AppleUpstreamUserClient    3.5.7
com.apple.driver.AppleMCCSControl    1.0.20
com.apple.driver.AppleMikeyDriver    2.0.5f14
com.apple.driver.AppleHDA    2.0.5f14
com.apple.driver.AudioAUUC    1.57
com.apple.driver.SMCMotionSensor    3.0.1d2
com.apple.driver.AppleIntelHDGraphics    6.4.0
com.apple.driver.AppleIntelHDGraphicsFB    6.4.0
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.0a1
com.apple.GeForce    6.4.0
com.apple.driver.AppleGraphicsControl    2.10.6
com.apple.driver.AppleLPC    1.5.1
com.apple.kext.AppleSMCLMU    1.5.2d10
com.apple.driver.AppleUSBTCButtons    201.6
com.apple.driver.AppleUSBCardReader    2.6.1
com.apple.driver.AppleUSBTCKeyboard    201.6
com.apple.driver.AppleIRController    303.8
com.apple.iokit.SCSITaskUserClient    2.6.8
com.apple.BootCache    31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.iokit.IOAHCIBlockStorage    1.6.4
com.apple.driver.AppleUSBHub    4.2.4
com.apple.driver.AppleFWOHCI    4.7.3
com.apple.iokit.AppleBCM5701Ethernet    3.0.5b8
com.apple.driver.AirPortBrcm43224    428.42.4
com.apple.driver.AppleEFINVRAM    1.4.0
com.apple.driver.AppleSmartBatteryManager    160.0.0
com.apple.driver.AppleAHCIPort    2.1.7
com.apple.driver.AppleUSBEHCI    4.2.4
com.apple.driver.AppleACPIButtons    1.3.6
com.apple.driver.AppleRTC    1.3.1
com.apple.driver.AppleHPET    1.5
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.3.6
com.apple.driver.AppleAPIC    1.4
com.apple.driver.AppleIntelCPUPowerManagementClient    142.6.0
com.apple.security.sandbox    1
com.apple.security.quarantine    0
com.apple.nke.applicationfirewall    2.1.14
com.apple.driver.AppleIntelCPUPowerManagement    142.6.0
com.apple.driver.AppleProfileReadCounterAction    17
com.apple.driver.DspFuncLib    2.0.5f14
com.apple.driver.AppleProfileTimestampAction    10
com.apple.driver.AppleProfileThreadInfoAction    14
com.apple.driver.AppleProfileRegisterStateAction    10
com.apple.driver.AppleProfileKEventAction    10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOFireWireIP    2.0.3
com.apple.iokit.IOSurface    74.2
com.apple.iokit.IOBluetoothSerialManager    2.4.5f3
com.apple.iokit.IOSerialFamily    10.0.3
com.apple.iokit.IOAudioFamily    1.8.3fc2
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleHDAController    2.0.5f14
com.apple.iokit.IOHDAFamily    2.0.5f14
com.apple.iokit.AppleProfileFamily    41
com.apple.driver.IOPlatformPluginFamily    4.7.0a1
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleBacklightExpert    1.0.1
com.apple.driver.AppleSMC    3.1.0d5
com.apple.nvidia.nv50hal    6.4.0
com.apple.NVDAResman    6.4.0
com.apple.iokit.IONDRVSupport    2.2.1
com.apple.iokit.IOGraphicsFamily    2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController    2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController    2.4.5f3
com.apple.iokit.IOBluetoothFamily    2.4.5f3
com.apple.iokit.IOSCSIBlockCommandsDevice    2.6.8
com.apple.iokit.IOUSBMassStorageClass    2.6.7
com.apple.driver.AppleUSBMultitouch    207.7
com.apple.iokit.IOUSBHIDDriver    4.2.0
com.apple.driver.AppleUSBMergeNub    4.2.4
com.apple.driver.AppleUSBComposite    3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    2.6.8
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.6
com.apple.iokit.IOCDStorageFamily    1.6.1
com.apple.driver.XsanFilter    402.1
com.apple.iokit.IOAHCISerialATAPI    1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily    2.6.8
com.apple.iokit.IOFireWireFamily    4.2.6
com.apple.iokit.IOUSBUserClient    4.2.4
com.apple.iokit.IO80211Family    320.1
com.apple.iokit.IONetworkingFamily    1.10
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOUSBFamily    4.2.4
com.apple.driver.AppleEFIRuntime    1.4.0
com.apple.iokit.IOHIDFamily    1.6.6
com.apple.iokit.IOSMBusFamily    1.1
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    6
com.apple.driver.DiskImages    289.1
com.apple.iokit.IOStorageFamily    1.6.3
com.apple.driver.AppleACPIPlatform    1.3.6
com.apple.iokit.IOPCIFamily    2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.8 GHz, 4 GB, SMC 1.58f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000BPKX-00HPJT0, 465.76 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 6
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3

Your MBP is actually a mid-2010, not a 2008. That's what the 6,2 model indicates.There's an issue with the graphics module on that machine. There was a program in place to replace the motherboard within 3 years of purchase, but you're probably outside of that. Some folks have supposedly gotten theirs changed outside of that period, so you can try.
http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US
What you can do to use it is download gfxstatus from http:gfx.io and force the graphics to Intel. That would affect your work with Final Cut, but at least you might be able to use the machine.

So I've found the laptop I want and it's at Best Buy...

Actually, the laptop that I have researched extensively is at several websites and stores. I do, however, like the components of Best Buy's configuation and price the best ,hence my registration here. First and foremost, the laptop that should be on everyone's wish list (lol) is the HP TX2Z Tablet that a Best Buy within 30 miles of me has instock (at least it says this online)! So, I see all these like 10% off coupons for computer accessories, TV's, applicances, etc. What about the one's for computers and whatnot? I am itching to feel like I'm getting a good deal on this, and even though I may already, I think a coupon would be great. My mom just bought the Toshiba Mini at Best Buy last week and signed up for that Reward Points crap. I don't really know what that is, but from my quick perusing through these forums, apparently you get coupons and whatnot. I'm not RUSHED to make this purchase and have been feverishly looking for a comparable used model of this laptop (hey, a quick reformat makes it new to me!), but if I could find a coupon or something I would definitely go buy one immediately. So do they just not make them for laptops? I found one online that says "$100 off any notebook purchase" and has some exclusions (which do NOT apply to me, so weeee) but it's some weird print screen although the coupon looks legit. It expires 11/24/2009 but it's the ONLY one I found and usually you would see these plastered all over the place so I don't want to try it and then look like some weirdo if it didn't work, lol. I printed it out anyway and still have a copy saved, but still. I don't know. Any help?
-rye

Always nice to see someone do their research, rye!
First off, sadly BestBuy does not have coupons that apply to laptops and desktops but the RewardZone will help a lot! It is basically a 2% cash back! These reward certificates can be applied to any purchase though!
Please believe me when I say, you will very rarely find a better deal on a equivalent configuration. Though what I said is irrelevant to you since the HP one does have different configuration but most people do not use over 80 GB and an 8-cell is not necessary unless you will be traveling frequently. I do want to warn you about some charges that HP will tend to throw on, such as shipping and services.
If you ever do have a problem, rather than walking right into BestBuy and having GeekSquad fix your problems, you will need to pay to ship the computer back and most of the time the manufacture even charges you for the parts which get real expensive. If you do have GeekSquad Black Tie Protection, GeekSquad will take care of everything and anything and every plan has one free battery replacement to boot. Typical 6 cell can range from $100 to $170 depending on the manufacture. Here is the 6-cell for the laptop you want. My HP has had the power chord tear 4 times and each new one cost me about $54. From that day forward, I always buy GeekSquad Black Tie Protection, it includes AC chord replacements!
Buying from BestBuy with a GeekSquad plan is the safest and best investment for your purchase. I know it seems like a bit more upfront, but factor the price out over the time of coverage, you pay about $6.70 /month for full insurance. I hate paying for my car insurance, but when I get in an accident, boy am I happy I have it. HP does not provide coverage and services even close to GeekSquad.
I hope I helped you understand discounts for BestBuy and by far, I do not shop at BestBuy exclusively, it's just that I have really grown to dislike HP after 2 desktops and a laptop.
Warm Regards,
Jason

By using Inspector, i found the way to create and insert a scrolldown list ; however the list has to be created from inserting each line at a time; what i am looking for is a way of creating a scrolldown large(30 to 100 lines) list.

By using inspector, i found a way to create and insert a scrolldown list (*) in a cell ; however it can only be done one line at a time .what i am looking for is to create a bigger scrolldown list ( from 30 to 100 lines ) and in excel we can do it by copy and paste from an other doc...there must be a way with Numbers !!! any ideas ?
(*)...go to inspector/4th icon to he left/format/local menu/and then input the list one by one...and it creates a scrolldown list where you cursor was located in numbers.
please help....

If you need to use this kind of objects, my guess is that it would be better to use an other application like libreOffice.
At an user request, I wrote an AppleScript grabbing the list from a table embedded in the Numbers document.
Here is an enhanced version.
--{code}
--[SCRIPT fake-scrolldown-list]
Enregistrer le script en tant que Script : fake-scrolldown-list.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dans une table d'un document Numbers.
Aller au menu Scripts , choisir Numbers puis choisir “fake-scrolldown-list”
Le script extrait la liste d'articles de la table « la_liste » de la feuille contenant la table ci-dessus.
Il demande de choisir un article puis dépose celui-ci dans la cellule sélectionnée.
ATTENTION : À la demande d'un utilisateur, Le script utilise un nom de table localisé.
Je n'aime pas cela parce que de ce fait, lorsque le script est utilisé sur un système Français,
il requiert une table nommée "la_liste" mais lorsqu'il est utilisé sur un système Anglais il requiert la table "the_list".
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: fake-scrolldown-list.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell in a table of a Numbers document.
Go to the Scripts Menu, choose Numbers, then choose “fake-scrolldown-list”
The script extract the list of allowed items from the table “the_list” which must sit in the same sheet that the table embedding the selected cell.
It urge to choose an item then insert it in the selected cell.
CAUTION : I use different names for the required table according to the language in use on user request.
I dislike this feature because a document built by a French user sent to an English one will fail.
On the French system the script ask for the table "la_liste" but it ask for the table "the_list" on an English system.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/31
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2, myListe, maybe
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName
Extract the list of allowed values from the dedicated table *)
                    if my parleAnglais() then
                              "the_list"
                    else
                              "la_liste"
                    end if
                    tell table result
                              set myListe to value of every cell of column 1
                    end tell
                    set maybe to choose from list myListe
If we select the Cancel button, exit silently *)
                    if maybe is false then error number -128
Fill the selected cell with the choosed value *)
                    tell table tName
                              set value of cell rowNum1 of column colNum1 to (item 1 of maybe as text)
                    end tell
          end tell -- Numbers…
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2
          tell application "Numbers" to tell document 1
                    set d_Name to its name
                    set s_Name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_Name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_Name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if
                    end if
                    tell sheet s_Name to tell (first table where selection range is not missing value)
                              tell selection range
                                        set {top_left, bottom_right} to {name of first cell, name of last cell}
                              end tell
                              set t_Name to its name
                              tell cell top_left to set {row_Num1, col_Num1} to {address of its row, address of its column}
                              if top_left is bottom_right then
                                        set {row_Num2, col_Num2} to {row_Num1, col_Num1}
                              else
                                        tell cell bottom_right to set {row_Num2, col_Num2} to {address of its row, address of its column}
                              end if
                    end tell -- sheet…
                    return {d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2}
          end tell -- Numbers
end get_SelParams
--=====
on parleAnglais()
          local z
          try
                    tell application "Numbers" to set z to localized string "Cancel"
          on error
                    set z to "Cancel"
          end try
          return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
--{code}
Yvan KOENIG (VALLAURIS, France) samedi 31 décembre 2011
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

I've finally found the answer to the freakin' annoying clicking and snapping sou

Similar Messages

Maybe you are looking for