I've found that middlemouse.contentLoadURL feature has changed its behavior in FF5.0 as compared with previous versions

I've found that middlemouse.contentLoadURL feature has changed its behavior in FF5.0 as compared with previous versions: I now can paste&load only full urls that start with "http://" prefix, but previously it was possible to paste&load any url even without protocol prefix. It is very useful when someone has an url for example just "support.mozilla.com", but with FF5.0 one _has_ to paste it to urlbar instead of just middle-clicking into the browser window (long standing and usual *nix behavior). How can I make middlemouse.contentLoadURL load any clipboard content not prefixed with protocol specification?

Oops, already found a solution: https://support.mozilla.com/ru/questions/824759
But, how could it be done via something less freaky (ala about:config)?

Similar Messages

I synced my Ipod to itunes now i can only double click the icons on the screen it seems that the swiping feature has been disabled, how do I get it back to normal? I've restored it but nothing has changed

I synced my Ipod to itunes now I can only double tap the icons on the screen, it seems that the swipeing feature has somehow been disabled, Is there a way i could fix it or get it back to normal?

Hi there,
It sounds like you may have an accessibility feature called VoiceOver enabled. Take a look at the article below for more information on how to use VoiceOver as well as how to disable it.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/ht4317
-Griff W.

How does an NSTextField know that it's value has changed?

I have a textfield that can either be edited by hand, or set through another control. (It's a page number, so you can jump to page 16 by typing in 16, or you can page up and down with the next/prev buttons) I have the value of the text field bound to an int page variable.
It seems to work correctly, when you type a page number in, it jumps, when you page up and down, the page number in the text box changes appropriately.
However, at some level, when I page up and down, the text box doesn't seem to know that it's value has changed, because if I type 1 it doesn't do anything. It doesn't call the bound set-method or anything. It looks like the textfield is thinking "I'm already 1, so I don't need to do anything." Even though it was 5 because I hit next 4 times. If I type an number other than 1, it goes there. If I THEN type 1, it goes to page 1, because now it thinks it's on that other page.
The problem seems to be that I'm changing the value of the textfield programatically, but some part isn't getting the message.
Does this seem like a reasonable explanation? And either way, any ideas on what's causing it?
thanks

Solution: in order for the textfield to behave properly, I need to do everything through the bound instance variable.
The problem was that the "page" instance variable doesn't actually exist, there's a page method and a setPage method, but the actual page is kept elsewhere. When I make sure to call the setPage method from the next/prev code, it seems to work.

I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer

I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer activates by phone. What is the solution to continue to use my program that I have had working on this computer for a long time?

You do not state which version... if CS2 read next
CS2 (and earlier) Activation Server replacement software
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
When you install the special version of PPro2 on a Win7 or Win8 computer, you MAY need to right click the program icon and select WinXP compatibility from the option popup... AND Vista problems https://forums.adobe.com/thread/416347
If not CS2, read next
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Firefox will not install. I keep getting a message that I have to restart my computer in order for updates to a previous version can be installed.

Every time I restart the computer and try to install firefox the same message keeps appearing. I attempted to uninstall the earlier version of firefox using "programs and features" in windows but the same message came up and thus I was unable to uninstall using that method. I have used a third party uninstall program which appeared to delete all traces of firefox including registry entries but I still have the same problem.
I am now in the position of not being able to load any version of firefox. HELP

Same problem here. I installed version 4.0, then removed it and tried to install 3.6. Now no version Firefox will not install. I keep getting a message that I have to restart my computer in order for updates to a previous version can be installed.
Every time I restart the computer and try to install firefox the same message keeps appearing. I attempted to uninstall the earlier version of firefox using "programs and features" in windows but the same message came up and thus I was unable to uninstall using that method.

Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
Has it returned to normal for you?

TS1347 Dear apple, The governments of Saudi Arabia has changed its weekend from THR&FRI to FRI&SAT, Therefore the start day of the week became SUN. unfortunately all Iphone user could not adjust this change on their I phones . So will you please facilita

Dear apple,
The governments of Saudi Arabia has changed its weekend from THR&FRI to FRI&SAT,
Therefore the start day of the week became SUN. unfortunately all Iphone user could not adjust this change on their I phones .
So will you please facilitate us on this matter.
Regards

Give apple feedback regarding this.
For a temporary fix, change your region? Get a 3rd party Calendar app that fits your needs?
I assume your current region is set in the photo?
If so, pick a region that has a start day of Sunday. (either historically or known for the present)
Note, with changing your region, it will change the default phone number prefix/country code for new contacts and addresses. (calling and SMS is not affected)

What are new features in BCS 6.0 compared with earlier versions?

Hi,
What are new features in BCS 6.0 compared with earlier versions. Can someone tell in few lines .. just the summary and we can find the docs since it is not seen in service.sap.com.
Many thanks,
Regards,
Ricardo Ferrã

Hi Fancia Luo
You can find the file which is suggested by Dan is available in the below link
https://websmp105.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=01100035870000000122&_HIER_KEY=501100035870000016962&_HIER_KEY=601100035870000210480&_HIER_KEY=601100035870000237998&_HIER_KEY=601100035870000238002&_HIER_KEY=701100035871000517655&
If the above link is not helpful. Please follow the complete path to find the specified file.
https://websmp105.sap-ag.de/sem ---> SAP ERP Financials --> Financial Close --> Business Consolidation --> Media Library --> Select Release Information. Under this you can find the file SEM BCS 747 - Overview and Positioning of New Features.
Regards
Rajesh SVN

HT5361 Why is that when I am composing a new message do I end up with multiple versions of my message I am composing up in my Google Trash mailbox? How can I stop this from happening?

Why is that when I am composing a new message do I end up with multiple versions of my message I am composing up in my Google Trash mailbox? How can I stop this from happening?

It was very hard to see what the box says because the message displays for less than one second. However, I was able to record it with my iphone and pause it until I got a shot of the message. The box says the following:
"Do you want the application “java” to accept incoming network connections?
Clicking deny may limit the application’s behavior. This setting can be changed in the Firewall pane of Security preferences."
I did make some changes. I will see if it works.
Thank you!!!

I have a folder from today that won't let me change its name. I can change the other folders just fine. I do it routinely... any ideas what I screwed up?

I'm as a loss. I don't understand why today's folder "2014-06-06" won't let me add "_Kim" to the end. I do it will all my folders since I download from a couple of cameras.

sorry... in PS cc and I closed Photoshop, just in case.... it didn't make
any difference and it hasn't ever been an issue before.
In a message dated 6/6/2014 7:03:57 P.M. Eastern Daylight Time,
[email protected] writes:
I have a folder from today that won't let me change its name. I can change
the other folders just fine. I do it routinely... any ideas what I
screwed up?
created by ssprengel (https://forums.adobe.com/people/ssprengel) in
Photoshop Lightroom - View the full discussion
(https://forums.adobe.com/message/6440564#6440564)

TS4036 My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

Welcome to the Apple Community.
Yes, update first, Settings > General > Software Update.
Then navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

I downloaded a facebook update that doesn't work on my iPhone OS. Can I get the previous version back?

I downloaded a facebook update that doesn't work on my iPhone OS. Can I get the previous version of facebook back? I have a 3G phone that doesn't upgrade to OS 4.3 which the newest facebook update needs to run. Now I can't use facebook on my iPhone at all. Is there a place to downgrade or to download the older version of the app?

i can't understan why i can get a facebook apps for my iphone 3g that is so "sad" i'm miss facebook all because u guys Apple have a new version of the facebook and the 3g can,t upgarde i'm vext with apple right now!.....

HT201210 Hellow every one. i just updated my iphone 5 with the ios7. unfortunately i experience different type of bugs...the most important one to me is that the itunes store do not open at all. i'm disappointed with this version of iOS.

Hellow every one. i just updated my iphone 5 with the ios7. unfortunately i experience different type of bugs...the most important one to me is that the itunes store do not open at all. i'm disappointed with this version of iOS. my itunes version is updated and my mc version is also updated
my question is: how can i make itues store to work? how can i go back to the previous version of ios?

Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

Has anyone else found that OS 8.0 has slowed the opening of apps considerably?

I just downloaded the latest OS for my ipad and found that it slows the opening of apps and the opening of web pages considerably. Has anyone else experienced this?

Hi there bitsko26,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
-Griff W.

I've found that middlemouse.contentLoadURL feature has changed its behavior in FF5.0 as compared with previous versions

Similar Messages

Maybe you are looking for