I've found under "Pictures" file "spellyxcustom.dict". What is it?

maybe this helps: *_This document will help you determine the model of iPod you have*_.
JGG

Similar Messages

LR5 - lost connection to picture files. Now what?

3 days ago I followed the advice of Barbara Brundage from Elements Magazine and deleted some files from Elements Organizer which were causing people problems. I had previously used organizer for my pictures but LR adopted the jobe about a month ago. Today I upgraded LR from 5.2 to 5.3 and then began editing pictures. When I tried to delete a picture a message came up to the effect that the file could not be permanently deleted from the disk since it could not be found. It offered the possibility of erasing the file permanently still. I chose that and the picture disappeared and a small box flashed by which said that the file could not be found. The number of files in the folder didn't change.
How do I reconnect to the picture files which are in a stand alone hard drive - And - will the editing I did today be lost of subsequently be connected to the appropriate picture files/
Thanks for your help
David

thank you for your reply.
I do understand that the pictures reside in a library and that what I see in LR is the picture with whatever repairs have been added. Those repairs don’t necessarily reside with the picture.
I understand that if I move files outside LR that they will be invisible to LR in which case they should have a red ! beside them. No such red , or any colour symbols appear. I have not moved any file, files or folders using Organizer or by simply re-locating them on the drive such as by dragging and dropping to a new location. Nor have I changed any file names.
I thought that ONE of the responses I had in the forum said that when I deleted the file from the disk that it would be deleted in Organizer. The author really said, I believe, that the file would be deleted from the source drive but would continue to appear in Organizer in which case a marker would show that the picture was no longer available.
I am editing files which LR sees since the green switch is on. The edits alter the pictures and so I assume that when I “export" them, they will carry the alterations to the new location.
The problem remains that when I try to Delete a picture file in LR, instead of the box I used to get which gave me the choice to delete it from the disk and then did that when I selected that choice, I NOW get the message I reported previously "The files are on a Volume that does not support Trash. Would you like to Permanently delete them?” I select “Permanently delete”, the box closes and another flashes on and off. It says “File could not be found”.
The file Does disappear from the film role beneath my editing screen in LR so perhaps all is well. My problem is that there was a change in the process of deleting from simpler to more complex (slower) and confusing since LR can’t seem to find the file it is deleting at this point.
So, is there a way to return to the out of the box process which was clear and quick? Did I do something or might I have done something which caused LR to arbitrarily change its ways?
I reiterate that there are no signs that LR can’t see the files nor have I changed any file names or positions.
Thanks for your help.
David

HT2905 I updated the latest itunes software and Display Duplicates is no longer under the file menu. How do I get rid of all the duplicates?

I just upgraded the itunes on my PC and the display duplicates option is no longer found under the FILE menu. How do I get rid of the MANY duplicate songs I have in my library with out the display duplicates option? HELP

Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See thisthread for background and please take note of the warning tobackup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
Note if some of the duplicate items have the iCloud link icon sign out of the store, then sign in again.
tt2

My computer cant open any of my saved picture files, saying code 213:19?

My Computer wont open my saved picture files and is saying error code 213:19?

What is your operating system?
What file type are your picture files?
In what program are they trying to open?

Hi: How do I move photos from iphoto to the "pictures" file?

Hi: How do I move photos from iphoto into the Pictures file? I just purchased a digital camera and the software is only available for photos in the pictures file. Thanks.

What camera and software is it and why do you want to use it instead of iPhoto? Is this software that came with the camera? You don't need to use it as iPhoto is all you need. That software is not compatible with iPhoto so you would have to abandon iPhoto if you want to use the camera's software.
OT

Creating Picture file from text. HELP

If someone could point me in the right direction or give me a example; that would be Great! Thank you, in advance.
This is the case... I want to create a picture file based on the text file being read, either bipmap, jpg or any widely used picture file format. What the program will do is read a file and translate the file into a picture. Based on the parameters in the file the program will create a picture the picture will be both text and other symbols.
Thank you.

With javax.imageio it is very easy to save a BufferedImage, so the problem really is how to render text on a BufferedImage. Here's a short sample how one line of text can be saved into a .png image. Unfortunately laying out text, rendering multiple lines, deciding where the line should be broken etc is a little more complicated than rendering just a short bit of text, but there's a lesson on it in the Java2D tutorial at http://java.sun.com/docs/books/tutorial/2d/textandfonts/linebreakmeasure.html
and further information in the 2D graphics guide at http://java.sun.com/j2se/1.4.2/docs/guide/2d/spec/j2d-fonts.html#wp74623
It might also be possible to get a gui component like JTextArea to handle the text layout and rendering for you.import java.awt.Color;
import java.awt.Font;
import java.awt.font.FontRenderContext;
import java.awt.font.GlyphVector;
import java.awt.Graphics2D;
import java.awt.image.BufferedImage;
import java.awt.Rectangle;
import java.awt.RenderingHints;
import javax.imageio.ImageIO;
import javax.swing.*;
public class Text2PNG {
    public static void main(String[] args) throws Exception {
     // The text to render
     String text = "ABCDEFG abcdefg";
     // The font to use
     Font f = new Font("Dialog", Font.PLAIN, 24);
     // Find out the bounds of the rendered text when fractional metrics and
     // antialiasing is used:
     FontRenderContext cntxt = new FontRenderContext(null, true, true);
     GlyphVector glvec = f.createGlyphVector(cntxt, text);
     Rectangle bounds = glvec.getPixelBounds(cntxt, 0, 0);
     // Set up an image that has the same size as the rendered text:
     BufferedImage image = new BufferedImage(bounds.width, bounds.height,
          BufferedImage.TYPE_INT_RGB);
     Graphics2D g2d = (Graphics2D) image.getGraphics();
     g2d.setRenderingHint(RenderingHints.KEY_FRACTIONALMETRICS,
                    RenderingHints.VALUE_FRACTIONALMETRICS_ON);
     g2d.setRenderingHint(RenderingHints.KEY_TEXT_ANTIALIASING,
                    RenderingHints.VALUE_TEXT_ANTIALIAS_ON);
     // Fill the background of the image with white:
     g2d.setColor(Color.WHITE);
     g2d.fillRect(0, 0, image.getWidth(), image.getHeight());
     // Render the text on the image in black:
     g2d.setFont(f);
     g2d.setColor(Color.black);
     g2d.drawGlyphVector(glvec, -bounds.x, -bounds.y);
     // Save the image as PNG to text.png:
     ImageIO.write(image, "png", new java.io.File("text.png"));
     // // Show a preview of the image (optional)
     // JLabel jl = new JLabel(new ImageIcon(image));
     // JFrame jf = new JFrame("Text to PNG");
     // jf.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     // jf.getContentPane().add(jl);
     // jf.pack();
     // jf.setVisible(true);
}

I have duplicate pictures in "my catalog" that I believe come from two Adobe folders found under "my pictures/adobe/ one is Revel and the other is Photoshop express which preceded revel. Can I delete those two folder without causing a problem with my cata

I have duplicate pictures in "my catalog" that I believe come from two Adobe folders found under "my pictures/adobe/ one is Revel and the other is Photoshop express which preceded revel. Can I delete those two folder without causing a problem with my catalog?

Thanks for the links, Limnos.
If you are willing to continue helping, here's what I found.
Just to clarify the two iTunes folders I am refering to are:
username-->Music-->iTunes
HD-->iTunes
I am presuming each location has a full set of files as outlined in the above links?
Not all the files are in both locations. Most are.
- The Itunes folder in my home folder does not have itunes library.xml.
- The Itunes folder in my home folder has a subfolder called Mobile Applications (username-->Music-->iTunes--> Mobile application). The Itunes folder at the HD level also has a Mobile Application folder but it is a subfolder of Itunes Media folder (HD-->iTunes--> iTunes Media-->Mobile applications) and has no files in it.
- I do not have an iTunes Media in the iTunes folder in my home folder.
- also the Itunes media folder (HD-->iTunes--> iTunes Media) has subfolders by type (books, movies, itunes u, music etc...) but the iTunes Media-->Music also has some of the same subfolders ( iTunes Media-->Music-->books, iTunes Media-->Music-->Movies, iTunes Media-->Music-->iTunes U). Is this normal repetition?
You say:
/itunes/itunes media/ music
but it is important to note what comes before all that.
There is nothing as far as I can tell before that first forward slash. Since the only iTunes Media folder I have is in the iTunes folder that resides at the HD level (HD-->iTunes--> iTunes Media folder) not the iTunes folder in my home folder (username-->Music-->iTunes) , I assume that's the one that holds the music.
Keep iTunes media folder organized and Copy files to iTunes Media folder when adding to library are both checked on
Does that give more clarity into my problem?

I have just upgraded to Lightroom 5 and my pictures that were from an later version came over but read on each picture "File can not be found"

I have just upgraded to Lightroom 5 and my pictures that were from an later version came over but read on each picture "File can not be found"

This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgradeto iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1

I opened the hard drive and found some intrusive files under places in left side of window.. How do I take them out?

I opened the hard drive and found some intrusive files under places in left side of window.. How do I take them out?

Thanks for the reply. I was able to save the data on the Macbook Air whose HD got corrupted by using File Sharing (ethernet connecting two Macbook Airs).
I am also going to make a disk image of the HD using Disk Utility and mount that Disk Image onto an external hard drive. That way I can save the hard drive contents.

Getting no file found under the given path- VNX-Family Monitoring and Reporting

Server- Windows-2012 R2
Using v21 of setup-vnx-mr-v21-win64
Using NAVCLI-Win-32-x86-en_US-7.33.6.0.96-1
Installed VNX-Family Monitoring and Reporting w/o any issues. Set user permissions.getting
Attempting to add VNX5400
I am using direct IP address: 10.X.X.X, Getting no file found under the given path error.
Any suggestions?
An using correct permissions
Thanks
This topic first appeared in the Spiceworks Community

Server- Windows-2012 R2
Using v21 of setup-vnx-mr-v21-win64
Using NAVCLI-Win-32-x86-en_US-7.33.6.0.96-1
Installed VNX-Family Monitoring and Reporting w/o any issues. Set user permissions.getting
Attempting to add VNX5400
I am using direct IP address: 10.X.X.X, Getting no file found under the given path error.
Any suggestions?
An using correct permissions
Thanks
This topic first appeared in the Spiceworks Community

Cropped JPEG picture files not dissolving smoothly in FCP

Working on a montage video here and when I try to do any type of fade in/fade out dissolve with picture files (that I've cropped in FCP under the Viewer's motion tab) the dissolve comes out looking strange. During the actual transition FCP is showing the entire uncropped picture, then once the transition completes it immediately beecomes my cropped version.
Any ideas?
Art

jagaroo--
Also found this very frustrating when I first started(still do) working with photos in FCP...
1. Do as the others suggested.
2. Maybe you know this.... If you already have the pics in FCP and you want to crop a picture, right click on the pic in the timeline, choose open in editor from drop down menu, crop your pic in editor, save, then return to FCP which will automatically update it.
3. I have even (on a picture with no movement) done a "freeze frame". Replaced the pic with the freeze frame (FCP is now looking at the whole frame, instead of just the pic) and applied my transition.
Still wish there was a way that it would read the crop all the way through. Very frustating with edge
feathers also!!
T.

My hardrive just got diagnosed as 'faulty' even though its only 1year8months old!!! I had adobe bridge installed on the computer with many picture files that included raw images. How can I get these raw files back after computer died?

computer did not start up one day. it was a white screen
took it to a mac bar and they said the diagnosis was a faulty hard drive
I had backed up most of my images ( i am a photographer)
had not backed up atleast 6 files full of raw images!!!!
they suggested sending it to a data recovery specialist which would cost around $500!
I am not getting the answers I need on how, why, or what is going to be recovered or if raw picture files will be able to be saved.
Not sure what to do next because I dont have loads of extra money laying around to pay for something that should have not occured in the first place if I was actually sold a good computer.
payed $1095 for this imac and it only lasted just under 2 years. I feel cheated and scammed! Has any one else gone through this same thing?? what did you do?

If it is only 20 months old it is still covered by the 3-year Applecare.
You did take out Applecare didn't you?
I had backed up most of my images ( i am a photographer)
had not backed up atleast 6 files full of raw images!!!!
Why did you, as a photographer, not make several backups, not just one or a partial one, of your material?

Open picture files and display in fullscreen slideshow?

I'm hoping for some help as I'm very new to LabView and quite lost....
I have a directory with many picture files (too many to put them all in
a powerpoint slideshow) and i want to open them one by one and display
them full screen with no border around them (not in a picture box, but
as displayed in a powerpoint slideshow).
I'm trying to use activeX to call the default "Preview" application for
windows, (which is able to run a slideshow when opened manually from
the directory). In the LabView VI, when the slideshow runs, it
takes over the full screen, as it should, however, the images are not
shown. The screen says "no preview available". I've messed
around with it a lot and just can't get it to work.
Any other application or any other way of displaying the images full
screen would be acceptable, if you know of any. I've also tried
the adobe acrobat browser 7.0, which has a full screen option, but i
can't seem to get that one to work either. Attached is a copy of
my code.
Any help or advice would be much appreciated. Thanx.
-dave
Attachments:
picture viewer2.vi ‏75 KB

The easiest would be to set the window not to have toolbars, scrollbars, etc. and to fill the entire screen and to scale all objects with the windows (these can be found in 2 pages of the File>>VI Properties dialog). If you resize your FP so your picture indicators fills it before doing this then any resizing of the window will resize the indicator as well. You can then use the Zoom property to enlarge the picture. To calculate how much to zoom you can divide the size of the picture by the Application>>Display>>Primary Workspace property.
Another option would be to use property nodes to change the Draw Area Size of the picture to fill the screen and to resize the picture itself using something similar to the method demonstrated here.
Try to take over the world!

How do I prevent Firefox from locking up when I click on "Save As" under the "File" menu (resetting Firefox didn't solve the problem)?

I'm running Windows Vista Home Premium OS on Dell XPS 420 system. Firefox locks up each time I click on "Save As" under the "File" menu. Resetting Firefox did NOT solve the problem. If, instead of using Firefox, I log on to a website using Microsoft Windows Internet Explorer, the "Save As" feature works fine, as it should. I would occasionally like to save a web page, using "Save As" while using Firefox, instead of copying the page to a Word Document, and then saving it.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

How to fix FO picture files created from interexchange

Hi,
I am working on a catalog from a client. There are 645 picture links which were not sent with the job (3GB worth). I did the job in CS4 and saved as .inx so my client could open it in CS3. In CS3, all the picture files are gray boxes marked FO and all the links are missing from the link palette. Is there an easy fix for this?
Thanks

Stephanie sent me the problem file last night and I've done a bit of playing.
It opened after around five minutes (maybe more) in CS3 with the expected missing links and missing fonts warnings and the gray boxes. Many of the gray frames have tags associated with them (FPO - which means "For Position Only" - on page 1) which are separate text frames added to tell whoever is working on the file that these are not the final images. That cleared up one qustion I had.
More importanly though, there were supposed to be 695 links. I looked in the links panel and all of the links were listed as foo.jpg, with a path of C:\foo.jpg, clearly not correct (I didn't count to see if there were 695). So I took a look at the .inx file as text.
.inx is basically XML, I think, but not really intended for human parsing. You can, however read it (and if you know what you're doing, which I don't, edit it) in a text editor, and it's pretty easy to recognize things like link paths. The correct paths seemed to be in place, so foo.jpg is clearly garbage and I have no idea where it came from.
I opened the same .inx in CS4. It opened more quickly, and showed the links as expected, just as Stephanie reported above, so I saved the file as a new .indd and then exportd a new .inx.
The new .inx was also slow to open in CS3, but this time the links were correctly imported and shown in the links panel, though of course they are still missing. This is the correct and expected behavior. My conclusion from this is that there is something odd about the first .inx file.
The first difference I noticed is that my file is smaller by about 100,000 bytes (both are over 17 MB). They are too large to do a complete comparison, but there are some differences in the beginnings of the files which I am not able to interpret, some differnces in swatch listings for Pantone spot colors which I would guess are a settings difference in Ink Manager for using LAB values for convrting spot to process.
I also noticed what appears to be some additional information included in the link listings of the first file which is not present in the second. I don't know how to read the tags or interpret the hex codes included, so I don't kow if this is significant, but I suspect that's the problem.
In any case, I'd like to know if Stepahnie did a plain Save or a Save AS before doing the initial export. My instinct is that a long series of regular saves left a lot of useless change information in the file that found its way into the .inx. Doing a Save As removes all of that garbage data from previous sessions and reduces the size of the .indd file and makes for cleaner export.
The bottom line, I think, is that the original .inx is defective, but that it could be regenerated successfully. If you have the time, can you do a Save As on the ID file, then make a new .inx and send that to me to see how it opens in CS3? I'm going to send you the one I made from the .inx you sent last night which appears to be usable, but it doesn't really solve the problem of WHY the first file was bad.
Peter

I've found under "Pictures" file "spellyxcustom.dict". What is it?

Similar Messages

Maybe you are looking for