I've got a imac under windows domain, if I loggin as no movil account, I cannot do anything. Why?

I've got a imac under windows domain, if I loggin as no movil account, I cannot do anything. Why?
can anyone explain to me how no movil account work?
thank you

Similar Messages

Android, Ipad authentication under windows domain environment

I’m really confused about the best practice to set up these devices in a 802.1x and Windows Domain network using ISE.
I had seen the Ipad download the ISE certificate the very first time the device is connected to the SSID. In Android device (Galaxy phone) I don’t see the device download certificate.
Testing with the Android device I was able to install the root CA certificate (a not easy procedure), then when the SSID is configured in the device I have the option to choice the root CA certificate.
Now if I don’t include the certificate in the SSID configuration, the device is able to connect with an Identity and Password only. If I include the certificate in the SSID configuration, the device ask for the certificate storage password if the option for use secure credentials is not enabled before.
How can I validate through the ISE the android device is using the certificate? Is it possible to set a rule in the ISE denying access if the device does not validate the certificate? I think EAP necesarity use certificates, but the Android device does not show anything.
I had read about provisioning and profiling the Android devices. I think the Network Setup Assistant available through Google Play is an easy procedure to install the root CA certificate. Am I Right?
The customer said it appears the certificate is being used to encrypt the username and password not for do the authentication itself. Reading about EAP functionality I believe it is right, I understand the EAP-MSCHAP actually creates a tunnel to passthrough the username and password. Right?
As the Ipad and Android devices are not in the windows domain, what should be expected when the password is expired? Customer Policy indicates users must change domain passwords every four months. In a Windows PC users receive warnings some days before the expiration but it appears nothing happen in non-domain devices. A co-worker told me the easy way is that when this happen the user should remove the SSID in the device and create it again. The customer does not like this behavior, so what should be a best practice work around?
I hope you can help me to clarify my doubts.
Regards.
Daniel Escalante

Client Provisioning for Android you can refer thease guides:
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/BYOD_ISE.html#wp1024291
http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113606-byod-flexconnect-dg-000.html#anc10

Running intel imac under windows?

i just bought a new imac intel dual core and im extremely new to the mac world and not to great with computers so i was wondering if i could get some help with this.
i was reading up on some forums and found out that the imac's with the intel technology can run in either windows or mac OS X and i just have a couple questions right now.
1) how do i get my mac to run under the windows OS?
2) is it possible for me to switch between the mac and windows OS's?
i would really appreciate your honesty.

I am going to set up my iMac, on Saturday, to run Windows. I was originally going to purchase VirtualPC but out came BootCamp . . . Give it a read. Switching between the 2 OS's does not really happen. You boot off of one or the other, however you can move files (again, check the restrictions [30Gig]) between the 2 OS's.
iMac 20" 2GHz, 1.5G SDRam Mac OS X (10.4.6)

21.5" iMac brightness problem under Windows 7

Even at lowest possible brightness under Windows 7,
this is much too bright for working in the evening/night.
I was using VistaShades under Vista, but now under Windows 7
VistaShades only darkens the background!
Does anyone know another program for reducing the brightness
which is Windows 7 compatible?
Thanks!
(BTW: I have the same problem using my 24" iMac under Windows 7
see http://discussions.apple.com/thread.jspa?threadID=2358779&tstart=0)

I has the same problem so i called a friend and all he did was go to navida's web site and download the beta drivers for gforce go 7600. make sure it is for windows 7. the ones on HP's website does not work and you can not use auto detect drivers when finding the driver.

Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP. I am loathe to upgrade to Windows Vista/7/8 just yet. Can I obtain and use an earlier version of iCloud Outlook Add-in? My iPad II synchronizes!

Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP. I am loathe to upgrade to Windows Vista/7/8 just yet. Can I obtain and use an earlier version of iCloud Outlook Add-in? My iPad II synchronizes!

There is no 'earlier' version that supports XP. iCloud launched with Vista/7 support only.

Why can't I install safari on my IMac running Windows 7 under Bootcamp

Why can't I install safari on my IMac running Windows 7 under Bootcamp?

http://support.apple.com/kb/DL1531?viewlocale=en_US&locale=en_US
Is this the download you're trying?

Double Display on Imac doesn't work under windows, there's a solution?

Hi, I'm a mac user who needs windows for certain applications, so I've installed it with bootcamp on my Intel based Imac 20''.
It's very useful for me having 2 monitors to work also in windows, but there's a problem: when I boot under windows the imac transmits the signal (I can go over the main monitor with the mouse) but the 2nd monitor doesn't receive the signal and remains black!
Everything is tested and works properly on macos, so there's a possible solution?
Thanks
Davide

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta

IMac 27" as external under windows

Hello there,
I just bought a rMBP and wish to conect it to my 2011 27" iMac, everything works under OS X, but if I try it under windows it won't recognize the iMac at all (this is with thunderbolt). Is there anyway I could use windows 7 (in the macbook pro) and use the iMac as external? (doesn't matter if booted with os x or windows). Thanks.

Anyone?

Configure the Apple numeric keyboard under Windows in iMac

I have an iMac with Windows 7. How can I configure the Apple numeric keyboard under Windows?

From Apple:
Are there any Macintosh features that I should not expect to work when running Windows XP on an Intel-based Macintosh computer?
Even after installling the Macintosh Drivers CD, the Apple Remote Control (IR), Apple Wireless (Bluetooth) keyboard or mouse, Apple USB Modem, MacBook Pro's sudden motion sensor, MacBook Pro's ambient light sensor, and built-in iSight camera will not function correctly when running Windows.

I just got an imac that doesn't have the option of a cd drive, I have my adobe suite on another computer, how do I get it on the new computer?

I purchased the adobe suite cs6 a few years ago on a cd, installed it on another computer, and now I got the imac that doesn't have a cd drive, how do I install the adobe suite onto my new computer without having to use the cd?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

MacBook Pro cannot connect to external display (projector) under Windows

Our office has got one of those lovely new 13" MacBook Pros and we cannot figure out why it cannot connect to either of our 2 projectors with Windows 7.
We have an older MBP with NVidia graphics that connects just fine under both OS X and Windows. And this machine connects fine under Snow Leopard.
There was a recent Thunderbolt chipset update and we applied that; on the Windows side the Intel driver has been updated but nothing happens. Have also zapped the PRAM to no effect.
To add another wrinkle: I just connected the MBP to my Cinema Display and the external display shows fine in both OS X and Windows--Windows didn't even require me to go to the control panel.
This leads me to two thoughts: either it is something with the Thunderbolt to VGA adaptor (hard to believe, though, since it works for OS X) or it is something to do with the native resolution of the projector (equally hard to believe, as changing through various settings in Windows NOTHING happens on the external projector--it doesn't blink, go back or anything.)
Any ideas?

I wish I could find the discussion, but I cannot.
There was a discussion about the Windows 7 driver for the Thunderbolt port. The conclusion I believe was that it only outputs digital signals, not analog.
The other conclusions were:
A USB-VGA adapter adapter bypasses this limitation because the driver is in the adapter itself and works regardless of the OSX/Windows operating system in charge.
Run Windows under VM, where OSX is in charge and can create analog output through Thunderbolt
If only I could find that thread ...

Mini-DVI not supported under Windows XP?

Hi all,
I recently picked up a mini-DVI to VGA adapter and a 17" LCD from Lenovo (IBM). Under OSX, the dual displays works wonderfully well and easy. The OS picked it up right away and ran with it.
Under Windows XP, however, no such luck. The display will mirror the iMac during the Windows boot-up process and then go black once XP is booted. The monitor claims nothing is attached to it.
Windows will play the "ding-ding" sound whenever I unplug or plug the adapter and even claims to see the monitor via the Display settings panel.
Google told me several people have voiced this complaint while logged into Windows on their Intel machines. Does anyone here know of a fix or workaround? Thanks!

Any ideas? I am having the exact same problem. The funny thing is when I boot in XP the windows logo is displayed on my external monitor. But then disapears. I will try and update the ATI monitor drivers, and see if there is a bootcamp update. But anyone with info please let me know!!
thanks

How can i use 3d pdf on my mac? Under windows i can open my pdf with 3d animation but under mac it is not possible. İ also check the web site of adobe, but there are no information about it. Please help.

Hello who can help me?
İ need to open the 3d animation pdf. But my mac is not able to open it and my friends have also the same problem.
İ need this information for my work. İt would be very nice if someone could tell me how i can open the 3 d animation .pdf files. Under windows it is no problem, because adope reader is open it. İ also check the site of adobe to find answers, but no results.

If there is no info on Adobe about it, this is probably a case where there is a special 3D plugin that Adobe has access to on your PC. You need to find out what software generated the 3D. Then you can find out if there is an equivalent Mac compatible plugin. That said, you can always run Windows on an iMac Intel if push comes to shove:
https://discussions.apple.com/docs/DOC-2741

Better Display Driver under Windows 8 than Windows 7 for MacBook Pro Retina?

Anyone happen to know if the display support for a MacBook Pro Retina is better under Windows 8 than it is under Windows 7?
Ideally, I would like to be able to run 2880x1800 at True Color as well as have the HDMI out fuction as a second display (maching the behaviour while booted under Max OS X 10.8).
Under Windows 7, the highest resolution that supports True Color is 1600x1200. This would be okay if that setting did not distort the picture (everything is slightly squeezed). At 2880x1800, the highest color depth is High Color (16-bit) which is, well, not something one can actually use if doing graphics work. On my 27" iMac, 2680x1600 supports True Color as expected.
Also under Windows 7, the display connected via HDMI is not recognized.
I've contected both Apple care support and Microsoft support about this, but Apple referred me to Microsoft and Microsoft referrred me back to Apple.
Thanks,
Warren
P.S. Personally, I think it's rediculous to even attempt to do graphics work under Windows, but tell that to the Windwows based corporate world that I freelance in.

Yes, there is a better display driver for the MacBook Pro Retina while running Windows 7 Pro.
And, the answer is so obvious, that I feel a little silly having started this thread in the first place!
The Windows 7 Professional NVIDIA drivers for the NVIDIA GeForce GT 650M card need to be installed manually by downloading them from NVIDIA directly.
If you need to do this on your MBPr Boot Camp volume, use this link:
http://www.nvidia.com/Download/index.aspx?lang=en-us
Then, set the pop-up menus based on your MBPr. [Mine were as follows: GeForce; GeForce 600M Series (Notbooks); GeForce GT 650M; Windows 7 64-bit: English (US)]
What tipped me off to this is that the CUDA drivers need to be downloaded manually on the Mac OS X side to take full advantage of raytracing in Adobe After Effects CS6 and CC. As soon as I started to run that installer it dawned on me, "Hey, you probably need to install the drivers on the Boot Camp side as well." And sure enough after doing so, I am able select all of the expected resolutions as well as run 2880 x 1800 at Millions of Colors (32-bit).
I guess I'm showing my nearly three decades worth of being a Mac user where I'm accustomed to having about everything needed included with the OS.
-Warren

Setup cocoon with 9ias 9.0.2 under windows NT

Setup Cocoon with 9ias OC4J (9.0.2) under Windows NT
This was a painful process for me. I finally made it work. Thought my story might help someone else. If anyone sees anything that could cause problems down the line, please let me know.
NOTE: This took me a week to get right, so the restarts I suggest may not be appropriate, just guesses on my part.
A. FIRST SECTION (Based off of steps 9 - 11 of Metalink note 148497.1) - This deploys the cocoon.war file
1. Copy cocoon.war file to oracle 9ias home in the j2ee/home/applications directory. (NOT cocoon_jvm14. I tried to use the cocoon with jvm1.4. The version of 9ias I use wanted 1.3, so that is what I ended up using.)
NOTE: I followed the 9-11 steps from the above note the first time and manually changed the files below, but when I had to reboot my machine a couple of days later it lost the changes. So I went in thru OEM and did it there and have had no problems. These steps are detailed below.
2. Log into Oracle Enterprise Manager. Click on 9ias instance. Click OC4J_home.
3. Go to Advanced Properties. Edit the default-web-site.xml file. Look for the statement <default-web-app application="default" name="defaultWebApp" root="/j2ee"/>. After that statement, add the following: <web-app application="default" name="cocoon" root="/cocoon"/>
4. Go back to OC4J_home. Click on default link near the top of the page. (It has a Path underneath is that says application.xml) Then click on Advanced Properties. Edit the application.xml file. Look for the statement <web-module id="defaultWebApp" path="../../home/default-web-app"/>. After that statement, add the following: <web-module id="cocoon" path="../../home/applications/cocoon.war"/>.
5. Go back to 9ias instance and do a "Restart All".
B. SECOND SECTION ( Based off of Metalink note 184826.1)
1. Go to the Apache/Apache/conf/mod_oc4j.conf file underneath your 9ias home. Add the following line at the bottom of the file: Oc4jMount /cocoon/* home
Either "Restart All" from OEM again, or follow step 3 from the note. WARNING: I read somewhere that if you try to do the dos dcm/opmn stuff with the OEM at the same time, that you have corruption problems? So close the OEM if you do the dos commands just in case.
C. THIRD SECTION (This is what I did with the Cocoon jars to make 9ias/oc4J find them and use them. I am by no means saying this is the correct way. Just a way. If anyone has a different way, I would appreciate hearing it.)
1. Go to 9ias home and in the j2ee/home directory make a new folder. (I called mine xerces.) Copy the following jar files, found in the j2ee/home/applications/cocoon/web-inf/lib directory (this dir will show up after cocoon.war is deployed with the A. FIRST SECTION restart), into your new folder:
a. batik-all-1.5b2.jar
b. xalan-2.3.1.jar
c. xercesImpl-2.0.0.jar
d. xml-apis.jar
2. Log into the Oracle Enterprise Manager. Click on OC4J_home. Click on Server Properties. Scroll down to the bottom and type the following into Java Options: -Djava.ext.dirs=xerces. (If you named your new folder xerces.)
D. LAST SECTION
1. I rebooted my machine and said a prayer. From the url "http://myhost:7777/cocoon/" I got the cocoon welcome page!

I've heard rumors its about a month away. We were waiting for it, but then
decided to go to Linux, as it probably performs better, and the release for
Linux is already out. 9.0.2 is certified on Linux:
- SuSe SLES7
- Red Hat Advanced Server 2.1
Waiting for Oracle to release a software product seems almost like waiting
for a sunny day in Seattle -- you eventaly get it, but its unpredicatable
as to when it will actually be at best...

I've got a imac under windows domain, if I loggin as no movil account, I cannot do anything. Why?

Similar Messages

Maybe you are looking for