I've got a Mac Pro and monitor reads

Entering power save. Every time I restart this comes on, and the screen is black. HELP!!

HI,
Did you mean this to be in Older Displays and Monitors ?
I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD ( or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
9:36 PM      Saturday; December 24, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
  iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Similar Messages

  • Will mac pro and monitors ordered together ship at the same time?

    Will Mac Pro and Thunderbolt monitors, if ordered together, ship at the same time? Or will they ship the in-stock monitors now initiating the Applecare start date for the whole order even though the Mac Pro is not expected to ship until sometime in March?

    I ordered the new Mac Pro (model 6.1) on December 18, 2013 along with a 27 in. Apple thunderbolt display.  The fully maxxed out new Mac pro shipped on January 8, 2014 and arrived January 13, 2014.  My Thunderbolt display shipped within 1-2 days of placing the order, i.e. the week of December 18th and arrived before Christmas.  A few days after receivng my new Mac Pro, I received the Apple Care paperwork and both the new Mac Pro and the Apple Thunderbolt display were listed with a start date of January 7, 2014, i.e. the day that my new Mac {ro was prepared for shipment -- not the day my thunderbolt display was shipped.
    Tom

  • Just got the mac pro and mouse will not connect.

    I've googled the heck out of it and can't find anything wrong.  At this point I don't know what else to say but, the mouse isn't working. Checked batteries, went through ALL processes, and nothing seems to work.  All I get it the green status light blinking or it will say it's connected for 30 secs but doesn't do anything. If anyone else has any other help or info I would appreciate it.

    Sprad05 wrote:
    If anyone else has any other help or info I would appreciate it.
    How far is you mouse from the back of your mac pro and is there anything between those two points?  Beyond about 3 to 4 feet the MM on a mac pro for many people is problematic.  Here's a 24-page thread on this topic:
    Poor Bluetooth reception and jerky mouse
    Bottom line, use a bluetooth dongle (that what I use -- IOGear GBU421) or wire up an external antenna to the bluetooth card inside your mac pro.
    As an experiment you could try doing a smc and pram reset and keep the mouse close to the back of your machine and seeing if it pairs up and stays connected.

  • Mac Pro and monitor compatibility

    Hi
    Just ordered a new Mac Pro (ATI Radeon HD 4870 512MB), couldn't afford an apple display.
    I'm looking to take advantage of the dual monitor option.
    Can anyone tell me whether I need an adapter to connect the following monitors? Or even if the following monitors will work with the NEW Mac Pro?
    Main monitor - Samsung T220 22" TFT Monitor 1680x1050 20,000:1 2ms VGA/DVI.
    Secondary monitor - Dell E151FPp 15" VGA.

    Be careful about mixing the 4870 with third party monitors. Make sure to test it out thoroughly before you return period is up. There have been display issues with the 4870 and any third party monitors. It is not guaranteed, however quite common.
    Check for mouse jumping, display anomalies, etc. The monitors listed should work however, it seems you need two adapters:
    This one should be included with your mac pro:
    http://store.apple.com/us/product/M8754G/A?mco=NDcyMDY3OA
    It depends on which monitors you want to hook up, but there are also these adapters:
    http://store.apple.com/us/product/MB572Z/A?mco=NDcwMjAzMA
    http://store.apple.com/us/product/MB570Z/A?mco=NDY5Nzg0OQ
    You could just hook your samsung DVI to DVI, then use the MDP to VGA for the Dell, however make sure to read the reviews carefully, as MDP to VGA (and MDP to DVI for that matter) hasn't had a really great track record according to a lot of people.

  • Mac Pro and Panasonic DV

    Have just got a Mac Pro (and am also new to Macs). I have a two year old Panasonic NV-GS15 digital video camera attached via firewire, I can't pick up the camera at all...in i-movie, Final Cut Pro (5.1) or even see it when looking under the firewire port. Have been on Panasonic website and the driver information I found was related to PC/Windows. Have emailed Panasonic but they aren't replying.
    Any suggestions/answers/wishes of luck?
    Mac Pro   Mac OS X (10.4.7)   2 x 2.66 Dual Core Intel Xeon, 2GB 667 MHz

    I have same problem with Mac Pro and Panasonic PV-GS120. I went to Apple store and tried Mac Pros over there and they all had the problem. PowerBooks (G4 and Intel) as well as iMacs can all see the camcoder fine and iMovie imports clips without problems. System Profiler does not show any FireWire devices once the camcoder is attached Mac Pro and /var/log/system.log reports that FireWire has been reset multiple times in the last minute. I've filled in the form to escalate issue to Apple but I have no idea when the issues is going to be addressed.
    Mac Pro   Mac OS X (10.4.7)  

  • Ive plugged in my USB superdive into my mac pro and nothing happens?

    Ive got a Mac pro and the disk drive doesn't work, so i bought a USB superdrive and when i plug it in, nothing happens. Its has if it isn't plugged in. I really only use my drive for sims 3. Please help, im desperate

    It's Superdrive for MacBook Air, I think.
    I'd the same problem about two months ago, because I was inattentive and I didn't read the titles right on the box. So, when I came home I was confused. MacBook Pro doesn't want to work with that Superdrive.
    After long searching I found nice solution: http://www.tuaw.com/2012/04/02/use-the-macbook-air-superdrive-with-any-almost-ma c/
    It really works.
    Hope this help you too.
    Good luck.

  • Ive got a Mac Pro bought seconf hand, It doesn't allow me to update as the username is blocked to the previous owner, it appears off and can't change it, the box goes directly to password. I have changed the computer username and password but the problem

    Ive got a Mac Pro 2010, bought second hand through eBay. When it comes to update the software, the username is blocked to the previous owner. It appears off and the box goes directly to password. I have tried to reset then to log in in apple store with my login but didn't help. I would appreciate any tips to sort it out
    Thanks fellas

    That machine did not ship with Mountain Lion (Mac OS X 10.8), so that means the copy of Mountain Lion on the machine was purchased by the former owner and is non-transferable. It is permanently linked to his/her Apple ID, so you cannot update or reinstall it.
    What you need to do (which the seller should have done for you) is reinstall the original system that that machine came with. I believe that would be Snow Leopard (Mac OS X 10.6). What you need to do is reinstall that system from the original disks. If the seller did not provide those disks, you can call Apple and get them replaced for a small shipping and handling fee.
    For more info, see:
    http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

  • I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

    I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

    If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.

  • I've got a mac pro problem with the starting up, but also a red light on the logic board solidly on. Its not among the diagnostic led. It's located near the BT adapter and the front fans. Also the fans run loud also. any solutions?

    Hi
    I've got a mac pro late 2006, and i am having problem with it for quite a while now. the problem i am facing is the start up process, and the red light on the logic board. Earlier I've got the two led on the diagnostic leds 5 and 6 turned on without the diagnostic button being pressed, and i think those are related to the processors overtemp. I've managed to solve that by, removing the processors and re applying the thermal compound on the heatsink. what i have left now with is the red light on  the logic board at the time i plugged in the power. At the same time when this light come on, the power indicator at the front panel come on as well. i am not sure what is this light relates to. We've replace the power supply too, and gone through the SMC reset but seems no help.
    Any idea on the problem? I am desperate about it, and i will be greatful if anyone can help..
    thanks and hope for your best solutions
    Kari

    I can't help directly with your problem but you might check here http://tim.id.au/laptops/apple/macpro/ for a service manual which could answer your question.

  • I just got a new mac pro and did not set up a password and now it is asking me for one? what can I do now?

    Hi...please help me. I just got a Mac Pro yesterday and did not set up a password at apple now it is asking me for one to download flash player plug in. what can i do?

    Shootist007 wrote:
    You must of set a password on the computer when you kfirst turned it on. Otherwise you wouldn't be using it.
    What I think you are talking about is a user name and password for an Apple ID.
    Apple IDs use a email address and a password you create for that email address on Apples website.
    There should be a link on whatever page you are on to Create an Apple ID. Click that link.
    Or just open App Store from the link on you Dock then Find the link to create an Apple ID.
    Absolutely not.  You can create a blank password.  Yes it's stupid.  Yes it's unsafe.  But from helping people with their Macs, I find most do not set up a password.  <facepalm>

  • Just got a new mac pro and can't manage to set a password and keep it.  It keeps telling me I have the wrong password.

    Just got a new mac pro and can't manage to set a password and keep it.  It keeps telling me I have the wrong password.  I want to start over and I can't even get back in to do this bc it won't take any of my passwords.  How can I start over completely?

    You got a new laptop? try asking there or in Lion forum.
    If it has Lion, use the Recovery Mode boot Command-R
    Use that to erase and reinstall - it has network install ability.
    Want MacBook Pro forum or Lion Community?
    MacBook Pro
    Lion Mac OS X Communities
    New, as in from Apple, it would have asked for full setup.
    Want to reset the password? (it is used then I'd wipe it clean and start over)
    How to run the Password Reset utility in OS X 10.7 Lion

  • I just got my first mac pro and I can't get the photos out of iPhotos moved on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. Thank you so much

    I just got my first mac pro and I can't get the photos out of iPhotos and move them on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. what to do? Thank you so much

    How is your external drive formatted? Use Disk Utility to check the volume format. If it is NTFS, you will need to reformat the HDD as exFAT in order to retain universal compatibility (RW to it on both Mac and Windows).

  • I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

  • Question about Mac Pro and Adding GPU's

    I am a recent convert from PC and I had a Dell system that had two Nvidia Cards in it, but I could not use each one to run one monitor because it was SLI and it could only clone my screen and not extend it. So I had to plug both monitors into one card, and I basically paid for one card that I never really used since I wanted two monitors.
    I have two monitors hooked to my new Mac Pro, and my question is if I put in another Nvidia GT120 will each GPU run one monitor, and will they run as one big desktop just they way I have it set up now. Plus is there any benefit to having the dual GPU? I work on documentary videos and I use Adobe Creative Suite a lot. Will having the dual GPU speed up things like After Effects and Premiere. I know snow Leopard will help some, but in the mean time will an extra GPU help any?

    As Hatter said, you can drive 2 monitors from 1 video card on the Mac. SLI/Crossfire doesn't work under OSX, so unless you need to run more than 2 monitors, there's no need to have more than 1 video card...
    And I wouldn't say you got no use out of the 2nd video card in your dell. If you were gaming at all, you were probably getting better performance using the SLI than you would have gotten with just 1 card.
    So, yes, under OSX, you can drive 2 monitors with the 1 card and it will let you either clone the desktop on to both displays (both show the same thing) OR stretch the display so the desktop stretches across both displays...
    I'll be doing this with my mac pro to drive 3 monitors (using a 2nd video card)... Which should give me a HUGE desktop (I can't describe how much nicer it is to have tons of desktop space when programming or doing video editing...)

  • Connection mac pro and tv sony bravia

    Hi guys, I got a mac pro 13" with osx 10.8.2 and I'm trying to connect it with a tv sony bravia KDL-40V5500 via HDMI cable.
    I simply want to use the tv monitor as the mac monitor... I connect it with the cable dvi-hdmi but it doesn't work.
    the tv firmware is the latest version available ( 2010), I' ve also tried with a samsung tv and it works perfectly so I don't get why with this sony doesn't fit.
    the mac recognize the sony tv but the screen is always black... I tried with every hdmi port on the tv ( they're 4)
    I also wrote to sony support team but the response was that must be an error setting on the mac...
    every tips will be pleased
    Andrea

    RESTART! got it.

Maybe you are looking for

  • When I try to open Firefox I receive this message, "Application has failed to start because ssl3.dll was not found." HELP!

    I've been using Firefox for about 3 years. Today, I ran a scan of my computer Webroot Anti Virus and deleted all "risky stuff" they checked. Don't know if this is a coincidence but right after the scan I could not open Firefox. I receive the message,

  • Adding a single channel to my service?

    I am hoping to get an answer from someone in Verizon.  Can I add a single channel to my current lineup.  I just switched from Comcast and realize now that I don't get the NHL network.  I don't really want the entire sports package for $15.  Can you a

  • What is the IDOC for Final Approval of PO

    Hi, Can any one tell me .. 1. what is the IDOC for Final Approval of Purchase Order? 2. Is there any Separate IDOCs for GRN(Goods Receipts Note) in Transaction MIGO. Like Creation of GRN, Changing of GRN, Cancelling of GRN, Transfering materials to S

  • Mail is not working in iCloud

    What is going on? I checked the status page and it is not indicating a problem. All of my emails are showing up in my Gmail inbox. How is this happening? What is going on?

  • N97 green and red call and end keys not working

    Couldn't find any mention of this on the boards - the red and green buttons on my N97 aren't working....I almost started to wonder if they were purely decorative! Anyone else had this problem. Guess I'll have to sent it for repair, a bit frustrating