I've got a payg sim: i've been given an iphone 3g, and when i connected it to my mac and itunes, a message told me that the sim was :not compatible" with the iphone. is this because, as i've been told, my card is an old style sim and i need the newer styl

i've got a vodsaphone payg sim: i've been given an iphone 3g, and when i connected it to my mac and itunes, a message told me that the sim was :not compatible" with the iphone. is this because, as i've been told, my card is an old style sim and i need the newer style that works In smart phones? if so, how do i go about getting the right card.

Contact your carrier & get a new sim...they should give you one for free.

Similar Messages

  • HT201210 the firmware is not compatible with my iphone

    i want update my iphone but when i open firmware :" the firmware is not compatible"
    i have iphone4s

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • When I down loaded the new upate a message said that the upgrade was not compatible with my anti-virus software so they disabled it. This is unacceptable.

    I got a message to up grade Firefox so I did. At a certain time in the process a message came up and said that you have some add ons that aren't compatible with this software so they will be disabled. At this time I tried to stop the up grade because I don't like things just being disabled, but it would not allow me to do so. As I continued to the next screen it told me that the software that was disabled was my anti-virus software. I run a business on my computer and am not happy that the protection of my computer and its contents is at risk.

    Firefox 4 is itself no longer supported and is not secure so the choice is between firefox 5 and firefox 3.6.
    Firefox 5 currently [/questions/839953#answer-205178 has problems] with the McAfee site advisor, but the McAfee AV still works ok with it; is that the AV you are using or is it something else ?

  • I just downloaded IOS 8.0 and now my Brookstone Scanner no longer work. I read in theScanner app that my scanner is not compatible with iOS 8.0.  Is there an Update coming to fix this? Or can I downgrade to IOS 7.0.  Right now my scanner is no good.

    MMy Brookstone Scanner no longer works with IOS 8.0.  Is an Update coming to fix this?

    You'll have to contact Brookstone, the developer of the app in question to find out if they will update the app.

  • Told when i updated my firefox 9.1 my yahoo toolbar vanishedhen updating that the yahoo toolbar was not compatible with firefox

    got an update alert from firefox to update which i did and saw a window that came up saying that update was succesful but that yahoo toolbar was not compatible with firefox and my yahoo toolbar has vanisehd and not been able to get it back i have mozilla firefox 9.1

    Get the latest Yahoo Toolbar as mentioned in the following Yahoo Toolbar User Guide:
    * [http://help.yahoo.com/tutorials/tb8/tb/tb_start2.html]
    I have checked and the Yahoo Toolbar works fine in Firefox 9.0.1. Check and tell if its working.

  • Could not complete your request because the file is not compatible with this version of photoshop

    Hello,
    I'm a beginner in PS. I was edit TIFF file in PS. Size of file is 21x89.1(22.6 MB). Then suddenly power - cuted. But after 5 min turn on PC and PS can't open my TIFF file.
    Error is (could not complete your request because the file is not compatible with this version of photoshop)
    What should I do, how I open this TIFF file? I realy need to open this file?
    Please help me...
    Regards, Suvd.S

    Out of curiosity, were you actually saving the file at the moment the power cut off, or had you just saved it?
    If not, I don't understand the reason the file should have become corrupted.  If it was successfully saved on disk from the prior save operation, just shutting off the power on Photoshop would lose your current edits, but the file should still be intact.
    -Noel

  • How do I resolve: "Could not complete the Crop command because the file is not compatible with this version of Photoshop" error message?

    Photoshop document created in current version of PSCC2014, now will not crop, resize, etc without throwing compatibility error.
    "Could not complete the Crop command because the file is not compatible with this version of Photoshop."
    How do I resolve without recreating the file?

    Ooops.  Hit save reply prematurely. 
    You may be able to open the flattened composite or the embedded JPEG preview of your file in Adobe Illustrator, GraphicConverter (Mac only) or some such application, but your layers will be gone.
    The problem of working across a network is that it's not supported by Adobe:
    This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
    See: 
    http://kb2.adobe.com/cps/406/kb406793.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
         Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.   It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

  • PSD error: "Could not complete your request because the file is not compatible with this version of Photoshop"

    Help needed, encountered this error while opening psd file.
    the psd file is created in CS5, tried to open it in CS3 because it said "...the file is not compatible with this version of Photoshop", i got the same error message in CS5
    tried to open it at Firework CS6 (got the idea from Re: Recovering Crashed PSD file) but it give me error message "Could not open the file. An internal error occured"
    is there any way to recover the file?
    it's for my mid-semester score
    thank you in advance

    Hi gener7,
    i've uploaded the file and sent you the link
    thank you very much for the help.

  • CS5: Could not complete your request because the file is not compatible with this version of Photosh

    After several hours creating a PSD file in Photoshop CS5 I attempted to revert some changes and got this error "Could not complete your request because the file is not compatible with this version of Photoshop".
    I closed the file and restarted Photoshop and still get this error.
    I restarted the computer and still get this error. Now my hours of work are WASTED!
    This file was created using Photoshop CS5 Extended and was never in any other software.
    Details:
    Mac Photoshop CS5 (12.0 running in 32 bit mode)
    File had a video layer (h.264)
    MaxBook Pro 2.8Ghz
    OSX 10.6.3

    I was able to open the file in Photoshop CS2 and all layers were intact. PS CS2 gave me the message: "A layer is corrupt and will be discarded." Turns out that was the video layer. The file itself was fine and I am again working on it in PS CS5.
    Which leads me to ask: If a video layer gets corrupted why can't PS CS5 open it?
    PS CS2 had no problem opening the file, it just flatteded the video layer - it even kept the current key frame.
    Additional info: Just before the file went bad I made a level adjustment to the video layer and set a keyframe in the animation panel. Then I saved and got the error "Could not complete your request because the file is not compatible with this version of Photosh' in Photoshop Macintosh". Also the source H.264 video file appears to be fine, it's only a 5 second clip and it play fine in every app - even PS CS5.

  • Could not complete your request because the file is not compatible with this version of Photosho

    I just tried to open a file that I had saved last night and I got the message:
    "Could not complete your request because the file is not compatible with this version of Photoshop."
    Normally I would just chalk it up to a corrupt file and redo the project but I've had this happen to me 5 or 6 times in the past two weeks. I dont know what to do!
    Things I've tried that haven't work:
    Opening in ImageReady and Gimp, changing file extention to .tiff, dropping into photoshop as smart object, opening in Illustrator, re-installing photoshop, deleting old actions/plug-ins that might glitch up the system.
    I just started a new job and I'm working on a 2.5GHz Mac Mini (OSX ver. 10.7.4) with Photoshop CS6 (16-bit).
    I am NOT saving over a server or anything like that.
    I did NOT close photoshop too quickly last night.
    I do NOT have any Nortan Anti-virus anything.
    I've spend hours reading up on this and every fix that I've found doesn't work.
    I've been using photoshop for YEARS and I've NEVER had this problem before.
    Please HELP!

    There is a problem with the latest update, Mac, and saving a PSD file.  Apparently it may not open in CS6, but will open in other versions.  They are working on patch.

  • On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

    Need help-
    On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

    Thank you station_two but I did install them in my
    applications>adobe>presets>brushes and still I get this error message......
    On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

  • Hi, photoshop crashed and the file I was previously working in on the same version says Could not complete your request because the file is not compatible with this version of Photoshop. I'll appreciate any help. Thank you.

    hi, photoshop crashed and the file I was previously working in, on the same version of Photoshop says "Could not complete your request because the file is not compatible with this version of Photoshop." I'll appreciate any help. Thank you.

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • "Could not complete your request because the file is not compatible with this verson of PS".

    Hi,
    I have adobe PS 2014, purchased about 1.5 months ago. Yesterday i saved my my file as psd, today i attempted to open my file only to recieve the following msg "Could not complete your request because the file is not compatible with this verson of PS". I do not have a later version of PS, this is all i have. Has anyone exp this before?
    thanks in advance for any help
    Ryan

    This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
    See: 
    http://kb2.adobe.com/cps/406/kb406793.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
        Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.  It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

  • Computer crashed. But i saved my PSD every like 30 seconds.. Now i open my file it says "Unable to complete request because the file is not compatible with this version of Photoshop"

    So my friend posted a funny pic in her christmas outfit and I thought it would be fun to turn it into a fake Christmas Movie poster..
    Anyways.. My computer crashed.. "It does that sometimes" I re-opened my PSD and it says "Unable to complete request because the file is not compatible with this version of Photoshop"
    Anyway to recover ANY of the file?
    Here is the file im having trouble with. You can download it here if you are interested in taking a look: http://portalpacific.net/movieposter.psd
    Thanks for any help! Happy New years designers!

    PortalPacific wrote:
    …Here is the file im having trouble with. You can download it here if you are interested in taking a look:  …http://portalpacific.net/movieposter.psd
    I downloaded it and looked at it.  Even Graphic Converter can't recover any pixels or meaningful data, just some general information:
    In my experience, if GraphicConverter can't open it, nothing will.
    Your file is toast  Sorry.

  • ITunes could not restore the iPhone, because backup copy is corrupted or is not compatible with restorable iPhone. What do I do if I want to restore the iPhone from the latest backup?

    I want to restore the iPhone from a backup, but can not as much as they wrote iTunes
    "iTunes could not restore the iPhone, because backup copy is corrupted or is not compatible with restorable iPhone."

    Bummer. Sounds like the backup is corrupt...
    Do you have a question?

Maybe you are looking for

  • Import Purchase Order issue in Fund-mangement

    Dear Sir, We have implemented Fund-Mangement and are facing following problem in Import Purchase Order . In Import Purchase Order , the CVD & Additional Duty are the MODVATABLE  items . But as per standard SAP practice , we are mentioning tax code as

  • Two Subnets?

    Have a WRT54G with network-ready printer connected via RG45 - works fine and all wireless laptops print to it. Need to move the printer to other end of house.  Do I need A) an Access Point, B) Bridge, or C) another router for the printer to connect (

  • CTI jumps

    Anyone out there having a problem with the cti jumping ahead about 12 or so frames after you hit play?  It's not a major issue but a little annoying. Thanks for any input.

  • Getting  BEA-110412 JTA error

    Hi, I have J2EE application which runs on weblogic 10.1 & oracle 11g database. I am getting the below error. ####<Oct 21, 2011 9:53:38 AM EDT> <Error> <JTA> <skate> <server> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tunin

  • Import keynote to imovie

    Hi I would like to do keynote slides with animation and put them in an imovie. What is the best format to export from keynote to retain the animations in imovie? Thanks