I've got a problem getting my PC connected to the Pinnacl...

I've got a problem getting my PC connected to the Pinnacle Showcenter!
Situation:
* Windows XP sp2
* Panda IS 2008 (disabled when trying to get connection)
* Welk Lynksys WRT54GL
* DHCP enabled (192.168.1.100 - 192.168.1.180)
* PC wired connection to router
* Pinnacle Showcenter 250 (I entered a static IP address 192.168.1.150 Subnet 255.255.255.0) wired connection to router.
I can't connect the Pinnacle Showcenter to my PC (Windows Mediaplayer 11) through the router when using a CAT5 cable. (I managed to get a wireless connection!)
As a rookie I mus be missing some settings but I've got no idea what. Gateway settings? DNS? Subnetmask?
Every little help is welcome.
Regards
Marc

On Pinnacle Showcenter use static Ip 192.168.150...subnet mask 255.255.255.0...with gateway 192.168.1.1 ...
 From the status page of router .... use DNS numbers on the same ...
Check if you are able to connect to the application or not ...

Similar Messages

  • Can't get a secure connection to the iTunes store

    Hey, been trying to connect to iTunes store for 4 months now. It used to work on my computer but now it says there's a problem getting a secure connection to the iTunes store. Its not the firewall or the network. Have tried: removing AVG, flushing dns, emailing apple, updating iTunes, uninstalling and reinstalling iTunes, changing to a new wireless network, but nothing worked. Have looked at all the pages of possible errors for windows but can't find anything that works.
    Any ideas? My computer used to have Norton 360 on it but it was deleted. Could there possibly be some files remaining that are preventing a connection to the iTunes store?
    Here's the error message part..
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iTunes Store was unsuccessful.
    An unknown error occurred (-28).
    Secure connection attempt to iPhone activation server unsuccessful.
    An unknown error occurred (-28).
    Last successful store access was 2009-03-22 00:06:15.

    here is the full message
    Microsoft Windows Vista Home Premium Edition Service Pack 1 (Build 6001)
    Sony Corporation VGN-SZ71E_B
    iTunes 8.2.0.23
    QuickTime 7.6.2
    FairPlay 1.4.10
    iPod Updater Library 8.1d19
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.5.1.3
    Apple Mobile Device Driver not found.
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number 7ED07C9C624D1BE5
    Current user is not an administrator.
    The current local date and time is 2009-07-05 18:27:05.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA, NVIDIA GeForce 8400M GS
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {A89A4327-224A-4BC2-A822-9B166AD2E714}
    Description: Intel(R) Wireless WiFi Link 4965AGN
    IP Address: 192.168.1.102
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Sun Jul 05 18:14:25 2009
    Lease Expires: Mon Jul 06 18:14:25 2009
    DNS Servers: 194.168.4.100
    194.168.4.100
    194.168.8.100
    Adapter Name: {5D4BDCCA-89C5-4C89-8547-1AAF8A41C56E}
    Description: Bluetooth Device (Personal Area Network)
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers:
    Adapter Name: {687A0F17-3DBF-4EDA-8008-7FEA39063F42}
    Description: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: Yes
    HTTP Proxy: 137.73.37.85:80
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Connection attempt to iTunes Store was unsuccessful.
    An unknown error occurred (-28).
    Secure connection attempt to iTunes Store was unsuccessful.
    An unknown error occurred (-28).
    Secure connection attempt to iPhone activation server unsuccessful.
    An unknown error occurred (-28).
    Last successful store access was 2009-03-22 00:06:15.

  • HT1277 why i cannot set up my exchange account into my iphone 4s.  everything that needs to input has been provided right, but error says cannot get email not connected to the srver.where seems to be the problem?pls help.btw,i have an outlook for macbook

    please help me find out the solution to the problem.
    My iphone 4S was not able to fetch mails from the server ( outgoing and incoming)
    I was trying to configure my exchange account and follow all the procedures correctly but am having trouble in sending and receiving mails as the error says " cant get mails cannot connect to the server?  where seems to be the problem?
    Have read from the support services that if you using a Pop3 account into another device which I did ( my email was configured via outlook for mac in my macbook) there might be a lock out problem and cannot get emails on the second device which is my iphone?  ( I want to set up my exchange account to my iphone so wherever and whenever i go i cant still access to my email easily. Please help.

    No one seems to be hearing what Big Q is saying.
    He can pair his iPhone to his Macbook, but cannot CONNECT. He's NOT asking for alternative solutions, like Wi Fi.
    I am able to both pair and connect my one one Macbook to my other one, but I can only pair but not connect my iPhone or iPad to either Macbook. So I have the same problem. But I can pair and connect my Macbooks to other Bluetooth devices, like my ancient Nokia cellfone, or my Bluetooth HP printer.
    It's irrelavent that I can instead use a direct USB cable or Wi Fi between my Macbooks and my iPhone/iPad - why can't I use Bluetooth? If Apple does not allow Bluetooth between it's Macbooks and other Mac devices, then why have Bluetooth at all? Does my iPhone have Bluetooth only so that I can pair and connect to my my non Apple mobile handsfree car kit, or communicate easily with the dreaded Apple enemy Samsung, or what?
    Make no mistake , I am a diehard Apple fan, but this Bluetooth non compatibility issue appears shortsighted and seemingly pointless. Why does Apple not just say why they created the non compatibility, or have a message on the Bluetooth setup programme which simply and clearly says "don't bother wasting hours of your time trying to pair and connect your iPhone to your Macbook, because we don't allow that anymore, reason being that............"?
    As a first time user of this Forum I am surprised at the intolerant and highhanded tone of some of the replies  to what is a legitimate question, that is obviously plagueing many, many other Apple users.

  • HT1595 Since getting a new Verizon router I must unplug/plug in my Apple TV to get it to connect to the network every time I turn it on. What can I do to solve this problem?

    Since getting a new Verizon router I must unplug/plug in my Apple TV to get it to connect to the network every time I turn it on. What can I do to solve this problem?

    I would discover which brand of routers verizon bundle and go to the router makers homepage and check if they had a newer firmware for the router

  • Problem getting a wireless connection to HP iPAQ h5455

    Problem getting a wireless connection to HP iPAQ h5455.  This unit is small hand held device simlar to a PDA.  I has both wireless and bluetooth access.
    I get a connection to the modem but I can not connect to the internet.
    I have verified the connection by ping and using the information provided on one of the h5455 status page.
    I believe the problem I can not find anywhere to enter in my user id and password to get access to my dsl account.
    Do I really need to enter in my user id and password to make a connection for the internet?
    I have 3 other computer in my home network, 2 hardwired and 1 wireless.  All of them can connect and go online with no problems.

    #1 What is the brand and model of your router?
    #2 What is the brand and model of your modem?
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Hi,  For no apparent reason my phone stopped working...so I did a reset and got the message 'Restore Needed'. I connected to iTunes and got this message: 'iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your pas

    Hi,
    For no apparent reason my phone stopped working...so I did a reset and got the message 'Restore Needed'. I connected to iTunes and got this message: 'iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your passcode on your iPhone before it can be used with iTunes'.
    The problem is, I can't enter my passcode because I'm not given that option on the iPhone. All I seem to be able to do is make an emergency call.
    It's been working fine otherwise. Any suggestions?
    This is the SECOND replacement iPhone I've had this week and I'm getting a bit fed up.
    Thanks in advance for any help,

    Are you referring to the 4 digit passcode needed to enter the phone and use it's features?
    If so reboot your iPhone and enter the passcode to get it operational.  Launch Image Capture on the Mac and connect the iPhone.  Now you should be able to download the video files to wherever you want on your hard drive. 
    OT

  • Updating firmware when I can't get an internet connection through the router

    I am trying to update the firmware for WRT54G V8, but some of the instructions indicate I need to have the router connected and be connected to the internet.  I cannot get an internet connection through the router.  Can I upgrade firmware without being connected to the internet through the router.  (I have had this router for about a year and a half with no problems until now.)

    Yes, you can upgrade the firmware without an Internet connection.
    To upgrade the firmware, first download the new firmware into a computer that you can wire to your router.
    Next, power down your entire network.
    Then wire the computer to a LAN port on the router.
    Disconnect all other wires from the router.
    Power up the router and allow it to fully boot (1-2 minutes).
    Power up your computer.
    Login to the router, and do the firmware upgrade  (it will likely take several minutes).
    Power down your entire network.
    Next you need to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • Bought PE 13, installation and registration OK. Want to access 'Help / first steps...(as well as the other options): always get message: no connection to the Internet. Which is obviously not true!!

    I can only repeat: I Bought PE 13, installation and registration OK. Want to access 'Help / first steps'...(as well as the other options): always get message: no connection to the Internet. Which is obviously not true!!
    hakune
    P.S. the way to get through to be able to post my problem is not very userfriendly.

    Pe won't contact net please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error between the computer and our activation servers.

  • While Opening HFM application getting Error : "A connection to the server has failed. (status=503)"

    Hi All,
    While Opening HFM application I'm getting Error : "A connection to the server has failed. (status=503)".
    I Checked the Doc ID 1516598.1 and tried to increase the timeout setting, which really didn't help.
    Where can check a log for this connection issue, not able to see any error in Starter or HFM server logs.
    Please help me to fix this issue.
    Server: Windows 2008 R2
    EPM Application: 11.1.2.2
    Database: Oracle 11g
    Regards,
    Rajeevan D

    Hi!!
         I am facing the same issue and have increased the timeout setting according to the Doc ID 1516598.1.
         When I open up the app, it takes more than 5 minutes but it just get little longer and I've got the error....
         My HFM is at 11.1.2.2.300 version.
    Server: Windows 2008 R2
    EPM Application: 11.1.2.2
    Database: Oracle 11g
    Thanks

  • Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

    Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • Bought a blue tooth keyboard and I can't get it to connect to the ipad

    I bought a keyboard from bro ketone to use with the iPad. I can't get it to connect on the Bluetooth. Does anyone use this product with their iPad?

    Return your phone and get your money back. There are no unlocked iphones sold in the US...none...zero...nada. All US iphones are locked to AT&T with no way to officially unlock them as AT&T will not authorize the unlocking of an iphone for anyone for any reason. Doesn't matter if purchase the iphone with or without contract, they are all locked to AT&T. Return it and purchase a phone in France. All of the carriers there offer unlocking.

  • How do I get iTunes to connect to the itunes store in Windows 8.1?

    How do I get iTunes to connect to the iTunes Store in Windows 8.1?

    Hello, russ222. 
    Thank you for visiting Apple Support Communities.
    Here are a couple troubleshooting articles that I would recommend going through when experiencing issues connecting to the iTunes Store.
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    https://support.apple.com/kb/TS3297
    Cheers,
    Jason H.

  • Getting error "cannot connect to the App Store"

    getting error "cannot connect to the App Store"

    YAY!!! Saved it in my Mac's Firefox Bookmarks for easy future access!
    Hope you are having a lovely afternoon today! I'm about ready to go bobo....I have an early meeting, and I don't want to oversleep! The nice part is that I work remotely, so I only have to wake up 15 minutes or so before the meeting.... I don't even use an alarm clock anymore (really, my iPhone alarm, which is much more pleasant), unless I have to get up at 6:30 or something....
    TMI?
    GB

  • Ipad not getting charged while connected to the laptop

    ipad not getting charged while connected to the laptop.

    It's no different from the iPad 1 in  that regard.  When connected to a computer via USB it should charge when sleeping only.   Hit the sleep button and leave it for a while to see if that works.   It's much slower charging that way than using the actual charger.
    Not all USB's are powered, or powered enough, so what the previous poster said could also be the case.

  • Why can't I get Lightroom to connect to the internet?  I've tested my internet connection and it is working.

    How do I get Lightroom to connect to the internet?  I've tested my internet connection and I'm able to.

    Sure, but if I have International League Pass shouldn't there be a way to tap into that? I mean, if I can watch it on my computer, why can't I conveniently watch it on the television sitting right next to it via Apple TV. Seems odd...

Maybe you are looking for

  • Setup problem of Entertainment Center for Windows 7.

    There is a problem with Creative's Entertainment Center for Sound Blaster X-Fi. In the download section for my SB X-Fi Platinum card, the Entertainment Center setup file is only available for Windows Vista and not for Windows 7. Even if I choose comp

  • Shared printer not visible on network

    I have an Epson WF-3520 and i originally tried connecting it directly to the internet but everytime it went to sleep the computer would no longer be able to connect to the printer and i would have to turn off the printer delete it from the computer a

  • Script in Process Success Message. No go in chrome(ium)

    Not sure if this is considered a bug or not, or if the handling of branches with process success message has changed, but it doesn't seem to work anymore with a standard branch to page on chrome. It is reporting: Refused to execute a JavaScript scrip

  • Every time I launch Firefox I hear the audio I uploaded for an EPK. Why?

    I have uploaded audio for an EPK, with Artistecard.com. Even after re-launching Firefox many times, and of course after closing all the pages, the music starts every time I launch Firefox, and plays over and over. What can I do? Thank you.

  • Class definition not found

    Hi I am getting an error with the message ' xml token writer ' class definition not found.May you please provide the API that I should use to make this class available.. Thanks in advance, Sudeep.