I've got a small problem w/a project...

I have a fistful of plans for model planes in pdf format. Some of these things are six feet across the wings. But when I blow 'em up to 100%, and try to print, all I get is the one page printed @ 15%. I have a "poster razor" which does a fine job, but it won't read pdf files. Does anyone know of a freeware that'll do th' job for me, or a method whereby I can do what's needed to get a whole plan done on several/many sheets? TilePrint also doesn't read pdf's; I tried that, too.
I'll certainly appreciate any guidance I can get.
Thanks,
Ron Ingram
Montross, Va.

I'm afraid I wasn't clear (thru my own ignorance ). What I've got isn't the Acrobat, but the reader. And that apparently doesn't have the same capabilities.
All it gives me is a button that says "Tile vertically, or tile horizontally".
So I guess I'm still stuck.
But thank y'all anyway.
RD

Similar Messages

Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows

Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same

Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
Next step is to pan that pink noise around with my SPL meter to calibrate the room.

Very small problem RE: Variable not initializing

//Hey, folks! Having a small problem here. Compiler keeps telling me that "result" variable may not have been initialized for this method. This is probably an issue of variable scope? It's staring me in the face and I can't see the problem. Can you see the problem?
public Shape randomShape()
          Random generator = new Random();
          intShapeDecider = generator.nextInt(3);
          int intCrdntX1 = generator.nextInt(500);
          int intCrdntY1 = generator.nextInt(500);
          int intCrdntX2 = generator.nextInt(500);
          int intCrdntY2 = generator.nextInt(500);
          int intWidth = Math.abs(intCrdntX1 - intCrdntX2);
          int intHeight = Math.abs(intCrdntY1 - intCrdntY2);
          Shape result;
          if (intShapeDecider == 0)
               result = new Line2D.Double(intCrdntX1,intCrdntY1,intCrdntX2,intCrdntY2);
          else if (intShapeDecider == 1)
               result = new Rectangle(intCrdntX1,intCrdntY1,intWidth,intHeight);
else if (intShapeDecider == 2)
          result = new Ellipse2D.Double(intCrdntX1,intCrdntY1,intWidth,intHeight);
          return result;
     }

Nope...don't think that's the problem. My random ints are only 3 possible nums ...0,1, or 2. I have an if for each possible condition. Therefore, nothing "else" can really happen. No?

Problem with installing free App (Everything is fine, bur we had a small problem getting your license)

Hello,
We have free App for SharePoint Online. Some our customers have problems with the installation. After install they see an issue with obtaining a license which should be free.
"Everything is fine, bur we had a small problem getting your license. Please go back to the SharePoint store to get this app again and you won't be charget for it."
See the screen:
How can we resolve the issue?
Thank you!
Our App: "Resource Reservation"
https://store.office.com/resource-reservation-WA104276770.aspx

Hi Gabe,
First, please check the suggestion above is helpful. I also suggest you removing all version of Office and re-install Office 2013.
We can try to run the application as an administrator and check if it works.
1. Right click the shortcut of the application or the main application.
2. Select properties.
3. Select compatibility tab and select "Run this program as an administrator."
If there is anything I can do for you about this issue, don't hesitate to tell me.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Macbook pro i5 intermittent problems switching on? Would not switch on today took several attempts anyone else got the same problem?

I went to switch on my macbook pro this morning, would not switch on could hear fan in background battery 96% but would not turn on, disconnected power supply twice the plugged back in and worked. Has anyone else has this problem. Only had the computer since April 11. Anyone got any similar problems?
Andrea

Basic warranty is one year. You can extend the warranty an additional two years when you purchase AppleCare. Don't you read your User Guide? Didn't they explain that when you bought the MBP?

I need help please! Can pictures get on your icloud other ways? Can something be put on there by someone other than yourself, liked public wifi or hacked? Got a big problem h some **** on an iPod and I am to knowledgeble about the ipod...thanks

. Can pictures get on your icloud other ways? Can something be put on there by someone other than yourself, liked public wifi or hacked? Got a big problem with some **** on an iPod and I am to knowledgeble about the ipod...thanks

You're not confusing this with a shared Photo Stream...?
Because the short answer is no, photos don't appear unless they were put there by someone with your Apple ID credentials. To rule out that possibility, change your Apple ID password by carefully following all these instructions:
iCloud: Change your iCloud account password
If you decide to change your password, and you also want to change your Apple ID, I recommend you do not concurrently change your Apple ID until sufficient time has passed and you are confident the password change has been effected on all your iOS devices. 24 hours ought to be more than enough.
It is not necessary to change your Apple ID unless it is an email address you no longer wish to use.

I got a big problem that iPlanet 6.0 SP2

Hi,
I got a big problem that iPlanet 6.0 SP2 is in cycle of restart.
The web server's error logs is the following:
[16/Jul/2002:00:30:05] info ( 8545): successful server startup
[16/Jul/2002:00:30:05] info ( 8545): iPlanet-WebServer-Enterprise/6.0SP2 B11/13/2001 00:49
[16/Jul/2002:00:30:09] info ( 8599): Installing a new configuration
[16/Jul/2002:00:30:09] info ( 8599): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:30:09] failure ( 8599): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:30:09] info ( 8599): A new configuration was successfully installed
[16/Jul/2002:00:38:14] failure ( 8545): Child process admin thread is shutting down
[16/Jul/2002:00:38:16] info ( 9053): Installing a new configuration
[16/Jul/2002:00:38:16] info ( 9053): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:38:16] info ( 9053): A new configuration was successfully installed
[16/Jul/2002:00:38:16] failure ( 9053): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:46:04] failure ( 8545): Child process admin thread is shutting down
[16/Jul/2002:00:46:05] info ( 9496): Installing a new configuration
[16/Jul/2002:00:46:05] info ( 9496): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:46:05] failure ( 9496): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:46:05] info ( 9496): A new configuration was successfully installed
[16/Jul/2002:02:43:31] failure (15596): Child process admin thread is shutting down
[16/Jul/2002:02:43:32] info (16212): Installing a new configuration
[16/Jul/2002:02:43:32] info (16212): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:02:43:32] info (16212): A new configuration was successfully installed
[16/Jul/2002:02:43:32] failure (16212): Error accepting connection -5928, oserr=130 (Connect aborted)
You can see child process is shutdown and restart it.
I don't know what's problem is.
And other problem is the following:
[16/Jul/2002:16:10:25] catastrophe (23966): Server crash detected (signal SIGBUS)
[16/Jul/2002:16:10:25] info (23966): Crash occurred in NSAPI SAF NSServletService
[16/Jul/2002:16:10:25] info (23966): Crash occurred in function direct_identityHashCode from module /usr/java1.2/jre/lib/sparc/libjvm.so
[16/Jul/2002:16:10:25] failure (23454): Child process admin thread is shutting down
[16/Jul/2002:16:10:26] info (24006): Installing a new configuration
[16/Jul/2002:16:10:26] info (24006): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:16:10:26] failure (24006): Error accepting connection -5928, oserr=130 (Connect aborted)
FYI, here is our environment:
# /usr/java1.2/bin/java -version
java version "1.2.2" Solaris VM (build Solaris_JDK_1.2.2_07, native threads, sunwjit)
# uname -a
SunOS wagency2 5.6 Generic_105181-31 sun4u sparc SUNW,Ultra-4
Sun Enterprise 450 (2 X UltraSPARC-II 400 Mhz, 2G Memory
If you have any solution and experience, please let me know.
Thanks,
Barney Kim
[email protected]

Barney,
from the error log the problem seems to be related to the use of an external JDK. Try reverting back to the original JRE. See if that helps, i.e., the server starts up fine. Use the administration GUI and select Global Settings > Configure JRE/JDK Paths. On the screen that appears, you can configure the path to the JRE. The default would be <server-root>/bin/https/jre.
If that works fine, you might download a more recent version of the JDK. iWS 6 SP2 supports JDK 1.3.1.
Hope this helps.
Best regards
Rodrigo

Small problem in refreshing JFrame

Please help me in sorting out this small problem. I called a function on a button click. In that function i tried to change the text on a button initially then i have some code to execute and then again i set other text to the same button. But iam not able to see the initial text while execution. It is as follows
jbut.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent ae)
connectServer(); //The function that i called
//conncetServer function
public void connectServer
jbut.setText("Please Wait");
// jbut.validate();
try{
Thread.sleep(10000);
}catch(Exception e)
jbut.setText("Disconnect");
// jbut.validate(); This i tried
But i am not able to see the please wait label on the screen i tried in several ways. can anyone of you tell me how to solve it..

Hi, Problem is Gui manages its own Thread, so once u invoke a process, until it finishes GUI won't get refreshed. 2 ways to handle it.
1. Either use SwingUtilities.invokeLater method
Example Code.
jbut.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent ae)
jbut.setText("Please Wait...");// set the text
Runnable connectServerThread = new Runnable(){
public void run()
connectServer();
jbut.setText("");// return back to normal.
SwingUtilities.invokeLater(connectServerThread);
or
2. Implement Runnable interface in ur class and invoke the same inside run method. It will definitely work since i checked it.
Example code.
Thread connectServerThread = null;
jbut.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent ae)
connectServerThread = new Thread(this);
connectServerThread.start();
public void run()
// set the label visible here.
jbut.setText("Please Wait...");
// invoke server process.
connectServer();
// hide the label or button here.
jbut.setText("");
Sreni.

Console CatOS MOTD small problem

Hello,
I have a small problem when connecting to a console port.
We make a connection via a terminalserver to the console port of a 6500 (Tacacs+). I like to have a banner before I login on CatOs. The problem with a MOTD is that only the banner is shown after a logout.
Any suggestions?
Greetings.
Jeroen

for some reason, this doesn't work for console access. It does work for direct telnet access.
Maybe there is some problem with remote access via a terminalserver to the console port. Do i have to change something on the line (TTY) ports of the terminalserver?
switch> (enable) set banner telnet ?
disable Suppress the default Cisco Systems Console banner
enable Display the default Cisco Systems Console banner

Many small problems in Mavericks

When user experience many small problem in daily work, I feel the design is failed.
Memory management has a lot of problem, I feel my macbook is abnormal slow after I upgraded to Mavericks. Sometime, I need to wait for several sec to get what I want.
I think this problem is extreme important for OS.
When I want to start a probelm, click once, no response, click twice, pop-up 2 times after 5 sec.
Then i change my way of work, clock one time, work on other task. 5 sec later, multi desktop switch the desktop to the starting program. Then, I don't know what I was doing.
Another is sound problem, sound doesn't work sometime and need some kind of procedure to get it back.
Please don't ask me do something to solve the problem everytime when it happen. It is OS task to work it properly.
Whatever how many great feature you added is meaningless if user daily experience is bad.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec bash
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Small problem

I am very new to java, and having a small problem:
When i click on a button, i want the buttons name to be displayed
in a text field, saying "You have pressed" then the name of the button.
but i want to do this with multiple buttons and not just one button, so i want to be able to press any button and its name to be displayed in a text field.
your help will be appreciated

Sorry if i did not display code, thanks to all those who replied, heres some of the code, if i have gone wrong in any where could you please help me too correct, i think you will have a general idea of what i am trying to achieve:
import java.awt.*;
import java.awt.event.*;
import java.awt.Button;
import java.lang.Object;
public class Calculator extends Applet implements ActionListener
Button b1 + b2 + b3 + b4 + b5 + b6 + b7 + b8 + b9 + b10 + b11 + b12 + b13 + b14 + b15 + b16 + b17 + b18;
setLayout(new GridLayout(5,4));
public void init( );
Button b1 = new Button( "1" );
b1.addActionListener ( this );
add(b1);
Button b2 = new Button( "2" );
b2.addActionListener ( this );
add( b2 );
Button b3 = new Button( "3" );
b3.addActionListener ( this );
add( b3 );
Button b4 = new Button( "4" );
b4.addActionListener ( this );
add( b4 );
Button b5 = new Button( "5" );
b5.addActionListener ( this );
add( b5 );
Button b6 = new Button( "6" );
b6.addActionListener ( this );
add( b6 );
Button b7 = new Button( "7" );
b7.addActionListener ( this );
add( b7 );
Button b8 = new Button( "8" );
b8.addActionListener ( this );
add( b8 );
Button b9 = new Button( "9" );
b9.addActionListener ( this );
add( b9 );
Button b10 = new Button( "10" );
b10.addActionListener ( this );
add( b10 );
Button b11 = new Button( "+" );
b11.addActionListener ( this );
add( b11 );
Button b12 = new Button( "-" );
b12.addActionListener (this );
add( b12 );
Button b13 = new Button( "x" );
b13.addActionListener ( this );
add( b13 );
Button b14 = new Button( "/" );
b14.addActionListener (this );
add( b14 );
Button b15 = new Button( "MC" );
b15.addActionListener ( this );
add( b15 );
Button b16 = new Button( "MR" );
b16.addActionListener ( this );
add( b16 );
Button b17 = new Button( "M+" );
b17.addActionListener ( this );
add( b17 );
Button b18 = new Button( "c" );
b18.addActionListener ( this );
add( b18 );
after this i get stuck, i don't know how to create a small text field that syas you have pressed (then the button name) if this coding is wrong, can you please explain what i have done wrong!
Thanks

Small problem led to big problem

I had a few contacts that existed on my Centro which did not exist on my desktop. So I contacted the Palm Chat Support. The person who helped me had me perform several things which eventually led to my phone getting stuck in a loop. Things were not getting better so I asked to be transferred to a supervisor. The supervisor told me the only solution was a hard reset. I finally agreed to this. Now when I reinstall any applications (not third-party) such as calendar or address book, my phone won't come on. I can see the calendar or the address book but when I go to turn on the phone, it goes back into the endless loop. A soft reset will not take it out of the loop, only a hard reset. When I do a hard reset, I then have the ability to use the phone again but I have no data in my calendar, address book, etc. So essentially I have either a PDA or a Phone--but I can't have both. This started as a very small problem (a few missing contacts which I could have probably/should have probably just manually entered into the desktop). Now I have a very big problem, simply b/c of what I was directed to do by Support. Is there any hope?
Post relates to: Centro (AT&T)

There could be to issues going on here that you are having this result. One thing could be corrupted data such as your contacts or calendar, the other could be corrupted programs that are coming back from a hotsync.
The first I would like to troubleshoot as it is the easiest. To fix this what we need to do is hard reset your device. The instructions to do that is here http://kb.palm.com/wps/portal/kb/common/article/887_en.html this tells you how to do all types of resets. Also, what we need to do is rename your backup folder. What this folder is, it hold all your programs from the last time you synced your PC. On your computer go here
Palm Desktop 4.2 and below
My Computer--> C drive --> Program files --> Palm/PalmOne--> your hotsync username
Palm Desktop 6.2.2
My Documents/Documents --> Palm OS Desktop --> your hotsync username
Right click on your backup folder and rename it to "backupOld". Resync your device to the same user name and you will get all your contacts, calendar, tasks, and memos.
You can install the programs again but make sure they are compatible with the device. Also try one program again and wait 24 hours to see if the same thing happens again. This way you know what program is causing the issue.
If you have any questions about this or if this does not work please post back.

Small problem really annoying! Reinstall does not fix issue!!

Hi there Small problem really annoying! Reinstall does not fix issue!!
The Next button when on Taskbar is showing back!
Weird but really annoying!!
Windows 8.1 64 AMD Quad Core Black

Nothing no help?

I've got a small problem w/a project...

Similar Messages

Maybe you are looking for