I've got a very complicated set-up that I'd like to know if it will work.

Hello people of apple!
I'm 14 running Win 7 on the desktop I built, and I'm soon going to switch to a MacBook Air in June.
I have a wireless G Zyxel router on one side of the house, and want the Airport Express to take that signal, add a network hard drive (via ethernet), and give me my own N network on the other side of the house.
I'll make it simpler below...
Zyxel G router
WEP secured
Airport Express
WEP secured with a different password
-WD Ethernet hard drive plugged into the Express
-Xbox 360 wirelessly connected to the Express
-Macbook Air/Pro (not decided yet) connected wirelessly to the Express
How will this work? The G router is WEP secured, and I want the Express to have a different WEP password so my family can't access my hard drive.
Can the Express take a G signal, make a N signal, add a hard drive (IN through its ethernet), and send the signal to both a macbook and an xbox?
Thanks.
PS. The reason I want N is so that I can get faster transfer rates from the hard drive, not in some illusion that my internet speeds will be faster.
So can Airport Express's Ethernet port be used to input AND output data? I know it should, as that is what the internet is, but just checking.
And I will be using Airplay with my iPod on top of all this.
Message was edited by: BobTheTwit

If you know where the page is at, I myself don't see any reason why you can't access it.
The only thing I could think was if Livejournal.com had a lock on the page or if you had to sign-in and your u/n and p/w had expired.
I'd say go ahead and at least try.
davewdan

Similar Messages

HT4623 i have 4s and the operating system is iOS 5.1.1 got the update message of iOS 6. if update the iOS 6, other functions will work unchanging?

I have apple 4s and the operating system is iOS 5.1.1 got the update message of iOS 6. if update the iOS 6, other functions will work unchanging?

What other functions?
There have been some wifi related issues reported with the 4S being updated to IOS 6. There is no turning back once you update so keep that in mind.
I recommend updating via iTunes so that you make a backup of all your data. You may want to make an iCloud backup as well.
Other than that, I don't understand what other functions you are concerned about?

Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work w

Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work with all our tools work quickly and efficiently, I guess I understand.
We await your response .
Thank you very much .

This is a user to user forum with "some" Adobe staff participation, make requests at this link
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

TS1702 Is there a way to lock out or restore original settings on an iPad used in a school lab setting. We need something like the program cornerstone, which will allow the iPad to revert back to its original setup.

We setup iPads for a mobile lab and students change the settings or set up a pass code on the iPad. Is there a way to lock the settings folder or an app to revert any changes back to the original set up like the program cornerstone (for a pc)?

you might need to post this question on iPad in the Enterprice community
check these posts, it might help:
https://discussions.apple.com/message/18419745#18419745
https://discussions.apple.com/message/11401701#11401701

HT1222 My Iphone 4 has been having messaging problembs since i got the 7.0.1 update and i would like to know if it can be fixed

My Iphone has been having messaging problems since i got the 7.0.1 update is there a way i can fix this

DavidBenJeshuah wrote:
apple wont give me a new phone cause I broke the screen and I replaced it my self.
Correct. When you did that, you voided all warranty/support, & forfeited the right to an out of warranty replacement.
There was nothing wrong with the screen I bought,
And, exactly, how do you know that? Since Apple DOES NOT sell iPhone parts, there is no official source for genuine parts. Thus, many on the market are counterfeit & produce nothing but problems.
Good luck.

I got a brand new iPod Touch but I'd like to know if I could exchange or return it so I can get the new one. It has no scratches and hasn't been dropped.

I want to know if this is possible. I'd obviously pay what's left for the newer version, but I don't even know if this is possible. Again, my iPod has zero scratches, hasn't been dropped, brand new. I had a case on it the whole time. Please reply! Thank you.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I am going to Phnom Penh, Cambodia next week. I have a playbook, but only got the rapid charger to take with me. Was wondering if the charger will work over there or will I get it burned up?

Solved!
Go to Solution.

Read the label on the charger. They are are mostly " input 110/240 V" or "110 - 240V" which covers all world power ranges. If it says "Input 110/115v" then it is Americas/Canada domestic only and it will get fried as Cambodia are on 230-240 like majority of the world .
http://en.wikipedia.org/wiki/Mains_electricity_by_country

Trying to scan photos from my photo album to a folder on my desktop. Have been trying to figure out for over an hour. Seems very complicated and cumbersome, Can you help?

Trying to scan photos from my photo album to a folder on my desktop. Have been trying to figure out for hours. Seems very complicated and cumbersome. Can anyone help? It's got to be much quicker (fewer key strokes) and simpler than what I've been able to discover.

Open the file, parse it, populate an ArrayCollection or XMLListCollection, and make the collection the DataGrid dataProvider:
http://livedocs.adobe.com/flex/3/html/help.html?content=Filesystem_08.html
http://livedocs.adobe.com/flex/3/html/help.html?content=12_Using_Regular_Expressions_01.ht ml
http://livedocs.adobe.com/flex/3/html/help.html?content=dpcontrols_6.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/ArrayCollection.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/XMLListCollection.html
If this post answered your question or helped, please mark it as such.

I just got my very first apple device (apple extreme router) but no dyndns?

I need to access my nas from outside. I got everything working, finally, except my dyndns account. Are you even able to use this router with dyndns? I got it yesterday and I like the signal, but no external access to my nas? I'm looking at this document but it refers to the older models I guess.
http://dyn.com/support/clients/
This may be a deal killer for me. My old router is working but I see these at work so I wanted to get a bit more acquanted with the apple hardware which is why I bought my own router. The signal from this is a tiny bit better than my old router, but I could also access my dyndns account from that one.
I have tried the dyndns.com and http and https://sitename.com and still can't access anything. I have also forwarded the 80, 443, and 22 ports and still, nothing. I know the apple stuff is supposed to work out of the box, but I've had very little luck with that at all. I have now set up several routers and none "worked" out of the box. I have done manual and auto setups. At least now I'm getting a bit more familiar with them to make them work, but I'm still stuck on the dyndns for it. If anyone has any suggestions please feel free to post. I'm still scratching my head trying to figure this out, thanks. The only apple hardware is this apple extreme, I run windows 7 on my computers. Oh yeah that error I still get every now and then from the utility on windows just stinks. Usually after I get that I can no longer even get into the setup.

Check the Sound system preferences. If the volume is turned up and the Mute checkbox is not marked, you don't have anything plugged into the headphone/output jack, and testing the Alert Volume on the Sound Effects pane doesn't generate a tone, then the technician may have failed to properly reconnect the speakers and you'll have to take the Mac back to the Apple Store. First, though, try resetting the PRAM:
http://support.apple.com/kb/ht1379
Regards.

Does anybody got a Windows 8 set up correctly on a Touchsmart PC ??

After trying three days setting up Windows 8 on my Touchsmart 600-1040es PC I can officially anounce ... it does not work (at least not for me) !!!
Is there anybody out there who got W8 to work on a touchsmart PC ??
Which model and how did you do it .... I am very curious !!
Thanks for your feedback (since HP does not seem to care a lot)

@ remstoffer
> Re: Does anybody got a Windows 8 set up correctly on a Touchsmart PC ??
Yes. I have been using my tx2 since the DP. Currently still on the RP. The only problem I had was a delay after the CP waiting for N-trig to get an update available for the DuoSense driver for Multi-Touch. (IIRC the generic driver that MS provided supported single touch only but at least tap worked. When I installed the then latest N-trig driver Multi-Touch worked but tap didn't.) Now there is a message about having to do the firmware update under W7 but that's no problem for me since I am dual-booting. Anyway, now I would complain more about pen support than touch but I think that that might have more to do with my hardware than with the level of pen support left in the OS. Even in W7 I wasn't really happy with the pen support.
What are your symptoms? Can you use it just as a normal Desktop without Touch?
What's a TouchSmart 600? Specifically how is Touch supported on it?... Oh. "NextWindow 1950"? Looks like it's pretty old (for W7 X64) and it isn't even listed by "Earlier Touch Screen Products". Perhaps you could try installing the W7 driver in compatibility mode? (I'm not going to insert a link to the driver I found--2009-11-05--in case I have guessed incorrectly about what you have. <w>)
Good luck
Robert Aldwinckle

HT202213 Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up desperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc

Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up seperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc) ????

How to use multiple iPods, iPads, or iPhones with one computer

I just got my new iPhone4 set up today and it has pulled in every email that is in my desk top as being unread. Yet I have read all the emails. Still the iPhone thinks they are unread. Does anyone know how I can delete all of these at one time?

I just got my new iPhone4 set up today and it has pulled in every email that is in my desk top as being unread. Yet I have read all the emails. Still the iPhone thinks they are unread. Does anyone know how I can delete all of these emails at one time from the phone?

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

My Ipod was originally set up as a sub-account of a firends. After that, I got an Iphone and set up my own Apple account. I just got a new Ipod, and now can't sync my old Itunes to it. Can anyone help me? I'm even OK with deleting the old Itunes account

My Ipod was originally set up as a sub-account of a firends. After that, I got an Iphone and set up my own Apple account. I just got a new Ipod, and now can't sync my old Itunes to it. Can anyone help me? I'm even OK with deleting the old Itunes account, and staring over. I just really want to get the new Ipod under my own account, and be able to use it...

There is no such thing as a "sub-account." Also, you probably mean iTunes library, when you say "account." Your "account" in iTunes is your Apple ID, which is what you use to sign in to the iTunes Store to make purchases. iPods are associated with an iTunes library, not with an Apple ID (iTunes Store account). You'll need to clarify...
So, this is what I think you are saying. You previously shared an iTunes library on a computer with your friend. Your old iPod was synced to that iTunes library.
You got an iPhone, and at that time, you set up your own iTunes library. Is that on a different computer? How does the iPhone affect your question about the iPod?
You got a new iPod. What is your "old iTunes"? Is that the iTunes library you shared with your friend?

I recently got a new iphone 4 w/iOs 7. I set up th eicloud, etc. and got my contacts and appointments from outlook. All was fine. Now it will not snyc/update my phone from outlook. I get "Your setup couldn't be started because of an unexpected error."

I recently got a new iphone 4 w/iOs 7. I set up th eicloud, etc. and got my contacts and appointments from outlook. All was fine. Now it will not snyc/update my phone from outlook. I get "Your setup couldn't be started because of an unexpected error."

Hello JinxUK,
Thank you for the details of the issue you are experiencing with the iCloud Control Panel. I found an article referencing the error message you are getting:
“Your setup couldn't be started because of an unexpected error.”
Apple is investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
I recommend saving that link so that you can check back for a resolution when it becomes available.
Thank you for using Apple Support Communities.
Best,
Sheila M.

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

I've got a very complicated set-up that I'd like to know if it will work.

Similar Messages

Maybe you are looking for