I've got an app frozen on the application page

I purchased an app, but it didn't disappear after I bought it and I can't get it to clear the app store page. It's frozen on there. Help?

Reset time, press and hold both the home and power buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.

Similar Messages

HT201274 My iPod touch got restarted and frozen on the apple logo screen after I erased all content and settings. And it got restarted and frozen again every 5-10 mins until low battery.

My iPod touch got restarted and frozen on the apple logo screen after I erased all content and settings. And it got restarted and frozen again every 5-10 mins until low battery. It also doesn't recognize by iTunes. Did any one has the same problem? And how did you solve it? Thank you.

Try here:
iOS: Not responding or does not turn on

I cannot open Pages from the app or from a saved document on the desk top. I get an error: "The application Pages cannot be opened -1712" Any suggestions?

I cannot open Pages from the app or from a saved document on the desk top. I get an error: "The application Pages cannot be opened -1712" Any suggestions?

The following previous discussion has a solution that worked for a variety of people with the -1712 error on a variety of applications and may help: The application Safari can't be opened -1712

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G.

Why all newly installed Apps appear on the second page of Launchpad?

I'm new to Mac (1y now). Using 10.7.5 on my MacBook Air.
Every time I install an App it appears in the second page of Launchpad and since I don't want to have a second page, I move it back into one of my App groups on the first page, erase the empty page, and next time I install an App it happens again! What's wrong with the endless open space I still have on the first page? Why is that not good enough?

Slightly bumping because I believe I understand this strange phenomena...
It would appear that the iPhone allows you to create folders, but the device still treats these apps even when they are put in folders as if they take a "Space" on the homescreen. That being said if you have more than a few third party applications installed they would " if you were to unfolder all your apps" end up on the second page.
Please tell me I am wrong and this is a joke...

Should a list of updated apps remain on the Updates page?

Before ios 7, as soon as an app would update, the icon and any mention of the update would disappear from the Updates page. Now there is a list there of all the apps that have updated since I installed ios 7. The list is organized by date with headings that say "Updated" followed by the date they were updated. This situation is also true for my iPad Mini. The list of updated apps remains on the Updates page.
Very strange is that the list does NOT appear on the Updates page on my iPad 2. Once the updates are installed on my iPad 2, the icons disappear from the Updates page.

Yes, it is normal.
Check the settings of your iPad 2 and see if you have Updates set to automatic.

HT4623 I've downloaded ios7 to my ipad and its now frozen on the 'Hello' page

I've downloaded iOS7 to my ipad2 and its now frozen on the 'Hello' page. Help please.

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

The application Pages won't open on my mac?

When i click on the application pages nothing happens. I tryed double clicking and the only option I'm given is to remove it from the dock. I tryed downloading douments from online, and then opening them, but it wouldn't open. What happened? How do I fix it?

Check that it actually exists in your Applications folder. The icon on the Dock is only an alias pointing to the original appliaction.
What version and release of Pages?
What version of OSX?
How did you buy and install it?
Peter

The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

Hi everyone.
I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf , (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
I follow the instructions of that document carefully:
I go to: PeopleTools -> Web Profile -> Web Profile Configuration
    2. Then I choose the Web Profile: "Development".
    3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
    4. Stop the Web Domain and Clear cache.
    5. Start the Web Domain again.
After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
I tried many combinations with the ctx parameters URL but it does not work yet.
I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter, Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
Thanks for you help and feedback.

2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
Also, you can use multiple ctx parameters:
E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

Just installed os x maverick and updated my version of pages now when I try to open a document stored in pages format from old version get message "The Application "pages" can't be opened -1712 What is wrong?

Just updated to new version of pages. Now can not open stored documents created under al pages. Get message "the application pages can' be opened -1712" hat do I do?

Apple released Pages 5.0 to run on Maverics only. They completely rewrote the program for Maverics and 64 bit compatibility. They failed to explain that this version is missing much of the previous version's capability and that it cannot read older Pages files. When they install it they leave the older Pages 4.3 in place because it is the only way to read the older Pages files and upgrade them to a level that can be read by Pages 5!
If you still have Pages 4.3 on your computer it will tell you what to do. If you do not then go into your backups and retrieve it.
Because of the deficiences of Pages 5 I have removed it from my Mac and gone back to working with Pages 4.3. I have also removed Pages 2 from my iPad and found Pages 1.7 in the Time Machinew backups and brought it forward and droped it onto the iTunes icon to restore it and then synced the iPad to get the Pages 1.7 running again - it is compatible with Pages 4.3 on the Mac so all is back to normal for me.
Apple say that they will fix many of the deficiences in Pages 5 in the next six months. I suggest you wait until then and keep an eye on these communities beforte considering the "upgrade".
Incedentaly Pages 5.0 writes files that cannot be read by anything else including Pages 4.3 - better hope no one sends you one! It does not save RTF either - what where they thinking!

The application pages is not loading

The application page of apple store is not loading in my iPad,why?

..... And are you running iOS 5 on the iPad? I assume that would get a warning from the store if you aren't running iOS 5, but I'm just making are. You do need to be running iOS 5.

Cant select the paper ICC profile in the applications page saet-up or print

Cant select the paper ICC profile in the applications page set-up or printer box.
I loaded a new paper profile into what I thought was the proper places(s) and it showed up in some applications but not in another. Does this mean the application is at fault? Can anyone tell me where the profiles are supposed to be installed?
Thank you in advance.

This is from "Ask Chris' forum:
Also, I suspect you are confusing paper types with color profiles. The paper types you see in the driver will not change: http://www.inkjetart.com/news/archive/IJN_01-26-06.html#3

Creating a table in the application pages and pasting it into iWeb 08

I have learned today that if you create a table in pages and then copy and paste it into iWeb 08 it uses the the ORIGINAL entry in the upper left cell as the name of the png file that is created as the image for the iWeb folder.
If that ORIGINAL name had a space in the name the resulting server can probably not link successfully the data in that png file.
Solution: When you FIRST create the table in the application pages that you plan to copy into iWeb use a single word in that upper left cell -- you can change the content later but the "pasted" file will be that word.png.
Enjoy!

I use the class cl_xml_document to create XML documents.
It has all the methods required to create XML documents...perfectly. It is fairly straightforward when you get into it...and you can produce very good xml files.
also, try this little report...
whilst this is not full blown XML example it may give some ideas or possibly the format generated maybe be enough for your needs. This is a simple test example of converting an ITAB into an xml type file and then it was sent to a server
report zsjc2.
data :
itab   type table of sflight,
l_xml type ref to cl_xml_document.
start-of-selection.
select * from sflight into table itab up to 1 rows.
end-of-selection.
create object l_xml.
call method l_xml->create_with_data( dataobject = itab[] name = 'ROOT' ).
call method l_xml->display.
data: v_uri type string,
        v_response type ref to cl_xml_document.
v_uri = 'http://broker.dev.eproc1.uk.compass:7080/saphttptest'.
call function 'SWF_XML_SEND_VIA_HTTP_SERVER'
    exporting
      uri                            = v_uri
      request_document               = l_xml
*   USER                           = ' '
*   PASSWORD                       = ' '
   importing
     response_document              = l_xml. "v_response.
You can use other methods, additional to what this example shows, to create a true XML file. You need more coding - but the above example is just a 'quick and dirty' half waay house to get you moving along in one possible direction. I actually preferred using the class than transformations.

My address book is not in the Launchpad nor the Applications page. How do I display it on the desktop?

How do I access the Address Book when it is not displayed in the Launchpad nor the Applications page? I need to transfer it to a flash drive.

It's now named Contacts.

Why has my iTunes app frozen? The screen has been unresponsive for several days now.

Why has my iTunes app frozen?
To begin with I thought it was restrictions on the country I was visiting but since retraining home it has not recovered.
The app opens and the screen is animated, but there is no response to my touch on any part of the screen.

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the iPad forum.
Regards.

I've got an app frozen on the application page

Similar Messages

Maybe you are looking for