I've got the memory card stuck in cd slot how do I get out

Ive got the sd card stuck in the cd ..how can i remove?

It's easier than you'd think https://youtube.com/watch?v=9fCUZo00I5E

Similar Messages

Shoot i got my memory card in my cd slot how do i get it out

how do i get it out?please help!

Guys, it has to be fairly new if it has a memory card reader!
Perhaps Mr Ives and company should reconsider putting the memory card reader slot just below the ODD slot. I am sure that many folks try to insert discs and memory card by feel alone.
sdfsddfgssdg, you may do some damage fishing around in the ODD looking for something as small as a memory card. Then any damage to your ODD would not be covered by warranty. Best to pay the price of your error and have it looked at by a pro.
Dah•veed

My ipad has frozen screen white the notification saying Not Enought Storege. How can I get out off it?

My ipad has frozen screen white the notification saying Not Enought Storege. How can I get out off it?

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use it again.
You need at least 50 MB of free space to back up onto iCloud. Open Settings > General > Usage, and remove applications that you do not need

HT5509 I am stuck in guided access. Nothing is working as the Apple support says it should. How do I get out?

My daughter' iPad is stuck in Guided Access. How do I get out?

Try resetting the iPad - press and hold the Poewr and Home buttons until the screen goes blank, then release them. The iPad should reboot. Go straight into the Settings app and turn off Guided Access.
~Lyssa

Leopard install is stuck halfway through. How do I get out?

I have a Power Mac G4, currently running OSX 10.3.9. Today I bought the installer disc for Leopard, and began an install.
The install is stuck on the "Installing" screen (which comes after it checks your disc is OK). I have the dreaded spinning beachball of death, and the thin blue line in the progress bar is going nowhere. Under the progress bar it says "Time remaining: Calculating...
My G4 specs:
Power PC G4 (3.3)
OSX 10.3.9
Processor: 1.25GHz
Memory: 1.25GB DDR SDRAM
I set the disc going in the lower DVD chamber (not the DVD player that came with the Mac, but another one I had installed that also has a DVD burner). Is it possible that my Mac doesn't like me using this DVD drive?
Help! How do I stop it and try again? I don't want to just shut down my machine in case I kill in mid-install. Is there a way of force-quitting the install or something?

A halfway installed operating system is not totally lost necessarily. It could just be a bad directory, or insufficient space, or a corrupt file somewhere that has yielded an issue installing. Regardless, you can attempt to recover data to an empty Firewire external hard drive at least the same size as your internal drive using Prosoft Data Rescue, Subrosasoft Filesalvage, or Boomerang's Boomerang if you can't mount the hard drive via Target Disk Mode using another Mac or booting that external hard drive from a second partition. To mount it via Target Disk Mode do this set of instructions:
http://www.info.apple.com/kbnum/n58583
Your recovered files won't be bootable, and registration codes won't be saved, but at least your data has a good chance of being saved if you do one of the above.
If you decide to get a second Firewire hard drive, my recommendation is to get one at least 20 GB larger than your internal hard drive, partition it, and install Leopard, Superduper, and one or all of the data recovery programs (Data Rescue, Filesalvage, Boomerang) on the 20 GB partition, and leaving the empty partition to recover data to. If you can boot that external hard drive's partition and do that recovery in one way or another, then you can safely analyze why the internal hard drive failed installation.
To boot the external hard drive after installing the operating system on it, use the Startup Manager below:
http://www.info.apple.com/kbnum/n106178
If none of the three recovery utilities can see the internal hard drive, then a data recovery specialist such as http://www.drivesavers.com/ is necessary. They are expensive.
This is why you should always backup before installing new software, and after saving any important data. See my backup FAQ*:
http://www.macmaps.com/backup.html
- * Links to my pages may give me compensation.

Hi there, I have a iphone 3gs and it wants to upgrade to the ios6 software, and you can't even use the phone now. My question is, how do i get out of the software update?

Hi there,
My partner owns an iphone 3gs, and was working fine yesterday, but now it doesnt want to work, as it is stuck on the new software update. How do i get passed this? I have tried plugging it into my computer as it was saying, connect to itunes. Did not seem to work.
Sincerly,
Faith

Your headline says iPhone 3GS, but your text says 3G.
iPhone 3G is not compatible with iOS5. 3GS is.

Osx stuck in single mode, how do I get out please

I have a Mac Pro OSX mountain lion, stuck in single mode,not sure of administrative account so just want to get out of single mode .it displays right now...display all 1475 possibilities?(Y or no) I hit No and it repeated I don't want to Press yes unless I know what's going to happen. can someone please Help Me.I just want to get out of here so I can take it to the Apple store tomorrow

If you cannot login you will have to go back to single user mode in order to reset a password.
Follow the instructions here:
http://www.macyourself.com/2011/08/20/how-to-reset-password-for-mac-os-x-10-7-li on/
excerpt:
Shut down your Mac and turn it back on while holding down the Command and S keys at the same time until your see a black screen with white text. This is known as Single User mode.
You can skip this step, but it’s recommended that you don’t because it will check the consistency of your hard drive. At the prompt, type fsck -fy and press Enter.
Once the disk check is complete and the prompt returns, type mount -uw / and press Enter.
Type launchctl load /System/Library/LaunchDaemons/com.apple.opendirectoryd.plistand press Enter.
Type ls /Users and press Enter. All of the usernames on the computer will be listed, which is helpful if you don’t know or remember what these are.
Type dscl . passwd /Users/username password while replacing username with one of the users displayed in the previous step and replacing password with the new password of your choice. Press Enter. You will likely get an error message about a file or directory not being found – it’s safe to ignore this.
Type reboot and press Enter.

Hi I've done An update on my iphone5 today and some how it's got stuck in recovery mode how do I get out of it

Hi I've just done the new up date to my iPhone, and it's now gone into recovery mode and is telling be to restore phone how do I do this

Beattygirl wrote:
, do you know how to restore it?
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

HT1349 My ipad has the apple logo stuck on it. How do I get rid of it?

I can't get my iPad to work. The Apple logo is frozen on it. I can't get it off to get it working again.

There are two things to try. If the first thing you try fails, try the next.
Two Button Reset.
This is the least likely to result in loss of data. Read that again, especially the phrase "least likley."
Unplug the iPad from the computer.
Press and hold both the home and the sleep/wake buttons (ignore the red slider) until you see the silver Apple logo.
When you see the logo, let both buttons go.
If this worked, you should see an icon instructing you to connect to iTunes. My guess is that the reset did not work.
DFU Restore
This will very likley result in loss of data.
Plug the iPad into the computer.
Ensure that it is running the latest version of iTunes and that it has access to the internet.
Press and hold both the home and sleep/wake buttons for exactly eight seconds.
Release only the sleep/wake button but continue to hold the home button for another five seconds.
Let go of the home button, then look at the computer screen for an instructional popup.
The popup should say "iTunes has detected a device in recovery mode. . .(etc)" Click accept to all boxes and let iTunes download and install all of the latest device Firmware and Software.
If no popup appears, repeat the above DFU instructions. If you 've never done a DFU, it may take about three attempts to get the timing right.

HT201210 Stuck in Activation Limbo, How do I get out of it?

I have an iPhone 4s. I've had iOS7 ever since the beta came out. I received it with my iOS Developer Certificate.
Last night my phone just went into the Activation Mode, like when you turn your iPhone on for the first time. It is stuck in Activation Limbo. It will not move past the screen after you select a Wi-Fi connection. This message appears...
"Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
If this problem persists, contact Apple Support at apple.com/support."
Well I've connected my iPhone to iTunes and it says my software is out of date and needs to be updated. When I check for updates, it says my sortware is up-to-date and won't do anything. It won't even let me back up my phone.
Has anyone else had this problem? Is there a way I can get my Phone back so I can use it? Do I just have to wait until it just randomly with Activate?

Hi
I am having this exact same problem. Apparently you need to put the phone in DFU mode, then restore the phone (i would advise backing up your phone before hand) However my phone will not allow me to do this so i am stuck as well.

I'm stuck in proxy mode, how can I get out?

I seem to be be stuck in proxy mode. Even with a new library and a new clip, it shows a 'missing proxy' label. I can't switch to 'optimized/original media'. FCPX simply doesn't do it. I already tried trashing prefs and reinstalling FCPX. please help?
Arnoud Kwant
The Netherlands

What exactly happens when you try to switch by selecting Original/Optimized as in Alchroma's image? Does it still show Proxy as selected?
You may also try Window->Revert to Original Layout.
If reinstalling, it is recommended that you use FCS Remover to make sure that all traces of the application are deleted. And then you'd need to download a fresh copy from the App Store, and also download the additional content from inside the application.
It stays on Proxy. That is the issue.
Revert to original layout didn't help.
I uninstalled using AppCleaner. I deleted all files (except the 1Gb of additional content)
(BTW thanks for Luis and Alchroma for trying to help)

I-Pod stuck in test mode, how do I get out?

I-Pod screen shows "Accessorize Test" below that reads "please plug FW" followed by "LCD ID: 1" and followed by "FWPWR : 0"
If I plug it into my computer, it isn't recongized. Doesn't show up in I-Tunes or on My Computer. I've tried pressing all the wheel keys... nothing works.

Have you tried "Resetting" your iPod. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: iPod isn't responding it appears to be frozen

I plugged my usb into a macbook air and opened a word document. when i tryed to save it an error box popped up saying word had encountered an error but when i tryed to click on the X it just kept popping up how do i get out of it?

Please Help I don't know what to do and the laptop isn't mine

If you don't need the changes saved then you can force quit the word app. On the menubar, cick the  > Force quit > select word.

How do I get out of the "no bootable device" screen?

I am doing a clean install of both operating systems and successfully deleted the windows partition, and reinstalled the Mac partition. When I got boot camp assistant started and it restarts to prepare installing windows, I am faces with the "no bootable device" screen. It says to insert a boot disk. Currently the Mac snow leopard disk is in the drive (in order to access certain disk utility functions, etc) but I can't get the disk out. I've tried force ejecting in every way and it won't eject.
So I try to boot back into the Mac partition by holding down option/alt, and it doesn't work. It just goes straight to the same no bootable device screen. How do I get out of this? Every suggestion I've seen is to hold down option and boot into Mac and I can't do that. It's almost like the keyboard does NOT respond at all while in the boot up process, can't force eject by holding keys, can't boot into anything by holding keys. Solution?

an update on this in case anyone else runs into this problem. it turns out the mac os x install disk got rubbed the wrong way or something and was mucking up my entire computer by just being in the drive. i couldn't get it out, so i took it down to geek squad and they forcibly removed it.
after that i was able to hold down option and get into the mac partition i created earlier, which i wasn't able to do with that disk in the drive.
now i can most likely get back to installing windows on my partition, however the drivers are located on that install disk...so i'm going to be looking for ways to get around that.

Every time I hit the app store I get the message "loading". How can I get out of this and get the app "qrreader" that I want to load???

I'm getting a little frustrated trying to get the "APP " "qrreader". Everytime I tap on the APP icon it is "loading". How can I get out of this and start over with the
APP I want???

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

I've got the memory card stuck in cd slot how do I get out

Similar Messages

Maybe you are looking for