I've got the problem about sharing the screen
Hi, i bought iMac 21.5 (Late 2013), i'v upgraded it to the Mavericks. I've got the problem about sharing the display, i have thunderbolt to hdmi adapter and while i plug it to my TV, it doesn't work, it has no signal on TV, can someone help me ?? Thank Yo
Hello Gukakila
Start your troubleshooting with the article below. Try out the cable on a different tv or monitor to see if it shows up there. You may also need to reset the SMC and Parameter Ram.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
-Norm G.
Similar Messages
-
The Problem about clearing the system cache
Hi, there!
I'm trying to draw a lot of image in iPhone programming.
I used [UIImage imageNamed].
but it doesn't clear immediately the system cache.
At last it occurs the out of memory.
So I thought using imageWithContentsOfFile, but it works very slowly.
Does anybody know how to clear the system cache?Read Position.flx can execute much faster than 5 ms but as it reads a register that is updated every 5 ms on the board, it reads the same value multiple times.
To get around this problem there are two methods:
Buffered High-Speed-Capturing (HSC)
With buffered HSC the board stores a position value in it's onboard buffer each time a trigger occurrs on the axis' trigger input. HSC allows a trigger rate of about 2 kHz. That means, you can store a position value every 500 µs. Please refer to the HSC examples. You may have to look into the buffered breakpoint examples to learn how to use a buffer, as there doesn't seem to be a buffered HSC example available. Please note that you need an external trigger-signal (e. g. from a counter of a DAQ board). Please note that the amount of position data that you can acquire in a single shot is limited to about 16.000 values.
Buffered position measurement with additional plugin-board
If you don't have a device that allows you to generate a repetitive trigger signal as required in method 1.), you will have to use an additional board, e. g. a PCI-6601. This board provides four counter/timers. You could either use this board to generate the trigger signal or you could use it to do the position capturing itself. A PCI-6601 (or an M-Series board) provides can run a buffered position acquisition with a rate of several hundred kHz and with virtually no limitation to the amount of data to be stored. You could even route the encoder signals from your 7350 to the PCI-6601 by using an internal RTSI cable (no external wiring required).
I hope this helps,
Jochen Klier
National Instruments -
The problem about changing the SID
Hello,
Due to some reasones ,we shoud chang the R3 sid from PR3(instance number is 00) to QR3 on one IBM iseries host .As we read some relatives doc about system copy ,we decide use method of exoprt/import to do this.But there are paramter that really confuse me now.In the step of SAP system instance indentification,I hesitate the instance number should be set.Should I choose a new number or keep the value that PR3 used(instance number is 00).BTW,is there two instance or just one instance in the host after I change the system sid
Thanks in advance.
Message was edited by:
RongI understnad this problem now.But still one got me.
I want to use SMIGR_CREATE_DDL to generating ddl statements for migration,but when I finished this ABAP I cann't find any script has been generated.
The installation Directory is '/tmp'.
Our platform of R/3 is OS/400.
Thanks.
Message was edited by:
Rong -
Is this the most up to date article on up-dating the iPhone OS - is there anything about the problems relating to the up-date to OS 6 - my G3 no longer works and Apple seems to have gone to ground. No Genius bar appointments available for a week!
iOS 7 devices need iTunes 11.1 or newer to sync. Depending upon your computer and the OS it is running, you may not be able to upgrade to iTunes 11.1 based on the requirements for iTunes 11.1. What computer and OS are you running your iTunes on? From the iTunes download pages I see the requiorements are:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store -
Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$
-
my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?
Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario -
Problem about get the workflow context
There are 2 servers.
One is Weblogic server (server1), deployed a fusion web project on it.
Another is BPM server (server2), deployed the bpm process on it.
On the fusion web project, we use API to get the tasks. But we encountered a problem about get the workflow context.
There are 2 method to get the workflow context.
1. getTaskQueryService().authenticate(userId, password, null, null), this method need to pass in useId and password, we can get the user form request but can't get
password.
2. getTaskQueryService().createContext(request), we pass the request on server1, but can't get the context on server2, exception thrown.
Appreciate if you can give some help.javax.el.ELException: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[jcooper, ERole]
at javax.el.BeanELResolver.getValue(BeanELResolver.java:266)
at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:173)
at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:200)
at com.sun.el.parser.AstValue.getValue(Unknown Source)
at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
Truncated. see log file for complete stacktrace
Exception thrown when createContext() -
Hi l have got a problem l downloaded the software iOS 7.0.4 for iPad 2 but doesn't want to install.It says verification failed because u are not connected to the Internet even l have data bundles or using Wifi
Try a reset: hold down the home button along with the power button until you see the Apple, then let go.
-
The Problem about Monitoring Motion using PCI-7358 on LabVIEW Real Time Module
Hello everyone,
I have a problem about monitoring the position of an axis. First let me give some details about the motion controller system I’m using.
I’m using PCI-7358 as controller and MID-7654 as servo driver, and I’m controlling a Maxon DC Brushed motor. I want to check the dynamic performance of the actuator system in a real time environment so I created a LabVIEW function and implemented it on LabVIEW Real Time module.
My function loads a target position (Load Target Position.vi) and starts the motion. (Start.vi) then in a timed loop I read the instantaneous position using Read Position.vi. When I graphed the data taken from the Read Position.vi, I saw that same values are taken for 5 sequential loops. I checked the total time required by Read Position.vi to complete its task and it’s 0.1ms. I arranged the loop that acquires the data as to complete its one run in 1ms. But the data shows that 5 sequential loops read the same data?Read Position.flx can execute much faster than 5 ms but as it reads a register that is updated every 5 ms on the board, it reads the same value multiple times.
To get around this problem there are two methods:
Buffered High-Speed-Capturing (HSC)
With buffered HSC the board stores a position value in it's onboard buffer each time a trigger occurrs on the axis' trigger input. HSC allows a trigger rate of about 2 kHz. That means, you can store a position value every 500 µs. Please refer to the HSC examples. You may have to look into the buffered breakpoint examples to learn how to use a buffer, as there doesn't seem to be a buffered HSC example available. Please note that you need an external trigger-signal (e. g. from a counter of a DAQ board). Please note that the amount of position data that you can acquire in a single shot is limited to about 16.000 values.
Buffered position measurement with additional plugin-board
If you don't have a device that allows you to generate a repetitive trigger signal as required in method 1.), you will have to use an additional board, e. g. a PCI-6601. This board provides four counter/timers. You could either use this board to generate the trigger signal or you could use it to do the position capturing itself. A PCI-6601 (or an M-Series board) provides can run a buffered position acquisition with a rate of several hundred kHz and with virtually no limitation to the amount of data to be stored. You could even route the encoder signals from your 7350 to the PCI-6601 by using an internal RTSI cable (no external wiring required).
I hope this helps,
Jochen Klier
National Instruments -
I have set up the RWA and I can log in to the web console with my server account. However when I click on any of the shared folders I get this error:
An unexpected error occurred. Please try again. If the problem continues, contact the person who manages your server.
Does anyone know how to troubleshoot this?
Regards,
MaciekI had this very same issue with one of our customer's servers that was running Windows Server Essentials. I ended up calling Microsoft about the issue. I hope this helps someone. This originally appeared on my blog: http://techspeeder.com/2014/01/14/remote-web-access-error-an-unexpected-error-occurred/
Troubleshooting Steps:
1. We were getting unexpected errors while accessing shared folders remotely
2. The tech found IIS handlers were missing
3. She went to IIS > server level ( parent level) and added managed handler mapping :
Name: svc-Integrated-4.0
Request path: *.svc
Executable: System.ServiceModel.Activation.ServiceHttpHandlerFactory, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
4. Added script mapping:
Name: svc-ISAPI-4.0_64bit
Request path: *.svc
Executable: windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll
Name: svc-ISAPI-4.0_32bit
Request path: *.svc
Executable: windir%\Microsoft.NET\Framework32\v4.0.30319\aspnet_isapi.dll
5. Ran IISreset.
6. We were able to access resources in Remote access, then. -
I have just updated to Yosemite, but now I can't get the custom short-keys to work.
In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
Does anyone have the problem? All the other shortcuts work!Hi Thomas,
I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
Thanks for identifying this issue!
In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
Cheers,
Alex -
The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
I know the image can fill the monitor, because at start up, the white Apple logo screen fills it up. But once the system starts up, there are bands of black framing the image. I have searched extensively on the internet and found the following clues, none of which solved the problem:
1) In the Windows world you can get software from ATI called Catalyst Converter that gives you the cpaobility to scale the image. This software/feature is not available for Mac users.
2) Viewsonic's web site has a trouble shooting tool. This came up in response to the topic "you have recently upgraded to a larger monitor"
"This could be an issue if you have an older Apple using the system's onboard memory to support both the system and video display. Even if you have enough onboard RAM to support a higher resolution, it will not since the system will use some of the memory. Because the true video RAM available is much smaller than the total onboard amount, the system limits the size of the image. You will need to contact Apple to get an upgrade in onboard RAM or update the complete system."
I have 2GB of RAM, so lack of RAM memory does not seem to be an issue. I am running OS 10.6.8
Does anyone have any clue how to solve this problem. It is frustrating to have a 27" monitor behaving like a 25" monitor.
Thanks in advance for sharing any experience on this.
JD in PAhttp://www.xlr8yourmac.com/Graphics/radeon_X1900XT/X1900XT_dust_buildup.html#sto rytop
http://www.xlr8yourmac.com/Graphics/X1900XT_Overheating/ATI_X1900_artifacts.html
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M/
http://www.amazon.com/PCIe-Power-Cable-nVidia-Video/dp/B002UR1654/
http://www.amazon.com/gp/product/B0036Q7MV0/ -
I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8? If this is so, I need to find an older flash player plugin to reinstall. I do not want to upgrade from 10.6.8 at this time because I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
rayvonr wrote:
...I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
1) Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) is a full featured app that can be downloaded from Intuit for $15 and will work with your data file if you are using Quicken 2005, 2006 or 2007 (if you version is earlier, let me know for more instructions on easy conversion):
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
2) Partition your hard drive, or add an external hard drive and install Mavericks there and "dual-boot" to operate your music programs in Snow Leopard and experiment with them in Mavericks.
DO NOT install Mavericks over Snow Leopard! -
Hi Everyone,
I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
to another computer.
My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
The following are some details about the problem:
1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
I know this because a current is being read on the current meter connected to field point module.
My questions are the following:
1. What are the possible reasons for the data not being sent to the field point module?
2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
Thankyou very much for any help that you can provide. I greatly appreciate it.
Faen9901Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
choose to provide LabWindows/CVI support.
Regards,
Aaron
Maybe you are looking for
-
Hey all, I've been using an xserve raid for imap storage for all my user's data for quite a while now, as originally I grew large enough that the sheer amount of data was bringing my mail server to it's knees when running it from the OS drive. Mailbf
-
i am living in germany. I enter my visa card informations to setup Apple ID. but it says this is not valid. but it is valid. may be it is not accepting the german card system. what is the problem. please help
-
We have a new macbook pro, my husband put his yahoo mail account on the dock mail icon, and then I put mine on it (its gmail)....It seems to have meshed the 2 accounts together, and both in-boxes are shown in one long window all meshed together.....a
-
URGENT!! - Bug on read (readLine) method?
Hello to all, I have need of a large aid. I need to know if There is the possibility that the method read() or readLine(), than I use for reading data from a socket from a PLC, has a Bug. This why, with the socket opened and of the data in arrival fr
-
Problem in cheque printing form "ZF110_PRENUM_CHC"
Hi All, I modified the standard form "F110_PRENUM_CHCK" as per my client requirement ,but in the form the multiple invoice documents(RUGP-BELNR) are not displayed.i.e., there are three invoice documents having same clearing document but in the form