I've got TWO problems when trying to run iTunes

I've been trying to solve them separately, but each one of the answers requires for the other problem to be solved, and I am desperate. I've recently (one week ago) bought an iPad mini and I regret buying it, since I can't sync it to my computer. I don't even know what to do anymore, and its been TWO WEEKS of constantly trying.
The problem started when I tried updating iTunes as usual via the Apple updater. Somehow it gave me an error message, so I did as told by the program and downloaded it manually. After that, I got an R6034 error. Following a thread's advice, I uninstalled every Apple-related program in my computer, even did some cleaning-up, just in case. I reinstalled it, and when I thought I was done, an error popped up claiming that I don't have sufficient privileges to start system services, so Apple Mobile Device failed to start. I tried to fix this, but the R6034 error keeps popping up EVERY time I try to install or even RUN iTunes.
What should I do? All my music is in this computer, and I am even thinking about asking for a refund on my iPad and iPod. iTunes has never given me trouble and I've been using it for at least 5 years, but this problem is big enough to make me reconsider whether or not use it.

I reinstalled it, and when I thought I was done, an error popped up claiming that I don't have sufficient privileges to start system services, so Apple Mobile Device failed to start. I tried to fix this, but the R6034 error keeps popping up EVERY time I try to install or even RUN iTunes.
Doublechecking. Have you worked through the following user tip?
Troubleshooting issues with iTunes for Windows updates

Similar Messages

Problem when trying to run MD04

I am experiencing problems when trying to run my MD04 Collective access, for vendor say X & Y.
I buy many products from these vendors and I therefore need to have access to place these orders anytime of the day (as it can take more than one hour to raise the orders) and it is only allowing me access last thing in the day for some strange reason.
Please can you look into this - I'm not sure if there is a server issue due to the size of the job, but I must have the ability to undertake this task.
I tried to limit the selection further but still the problem is not getting solved.
please tell me what else can be done?
Thanks in advance.
Regards,
Sonal.

Basically when i am trying to do collective access thru MD04 I am putting plant and vendor.
the sys is not displaying the stock reqmt list but is getting time out.
I tried limiting further by putting delivery dates, MRP controller but still it is not working.
What else can be done?
Thanks & Regards,
Sonal

HT1349 When trying to run itunes on my PC, get this message. This application has failed to start because MSVCR80.dll was not found.

When trying to run itunes on my PC, I get this message. This application has failed to start because MSVCR80.dll was not found. Do you have any clues on a solution?

Welcome to Apple Support Communities
A solution is listed in the thread below.
It probably and other similar discussions appear in the More Like This window to the right of your question. The ones with a green check mark are questioned marked 'answered' by the original poster.
https://discussions.apple.com/message/24610401#24610401

Error when trying to run itunes

I downloaded ace codecs pack for my pc and after installing I tried to run itunes and i receive an error every time I try!
PLZ help me I dont wanna format the pc agein

hello the moon!
I downloaded ace codecs pack for my pc and after installing I tried to run itunes and i receive an error every time I try!
gaah ... are you currently getting an "itunes has encountered an error ..." message? if so, does your QuickTime currently give you an error message when you try to launch it?
the Ace Mega Codec Packs have been breaking QT 7 and itunes lately. i think it's something to do with some versions of the codec pack containing the old QT 6.5.2.10 codecs, but i'm not precisely sure what the mechanism is.
first, let's try a careful standalone QT 7.0.3 reinstall. download and save a copy of the the standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off all antivirus and antispyware applications prior to the install.
Quicktime 7.0.3 Standalone Installer
if you get an error message on the install, let us know what it says. include error message numbers if you're getting any.
if the install goes through, do QT and itunes launch properly again?
love, b

Tryed to install the latesest version of itunes and got error 126 when trying to start itunes

After installing the latest version of Itunes, which it said it installed successfully,I got the following message when trying to start up Itunes,
Error 7 Windows error 126 The program can't start because MSVCR80.dll is missing from your computer.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Problem when trying to run in "Debug Mode" in JDeveloper9i

Hello All ,
i have a problem to debug my application using
JDeveloper9i .
i get an error: "fdebug.exe could not be read "
and Application error box appears .
i did the following steps in the instalation:
1) i installed the JDK 1.3
2) installed the Jdev9i from base installation zip
3) In <jdeveloper_root>\jdev\bin\ i executed the command
InstallOJVM.bat c:\jdk1.3
and get message:
"InstallOJVM successfully"
4) i wrote simple program and put a breakpoint ,
when i'm trying to run the program in "Debug mode" i get an error box message
"fdebug.exe Application Error"
The memory instruction could not be read
please help ,me to fix the problem i need the debuger option .
thanks in advance.

Do you have the file c:\jdk1.3\jre\bin\fdebug.exe, if you don't, you
need it. Look for the file in the base install directory, it should be
there and then copy it to the location above.
Michel

Problem when trying to install iTunes 7.7

Hi Experts,
While trying to install iTunes i get an error message as follows - "Older version of Apple software update cannot be removed. contact your technical support group."
Now I cannot even get into iTunes nor does iTunes start automatically when the ipod touch is connected to the computer.
Pls. help me in resolving this issue.
thanks

Sorry to say I am glad this is not just me. That is why I am here also. This just started the other day. I will post a fix if I find if off the board and hope you will do the same. Talk about chasing your tail. I can not delete the program no matter what I try. I was warned by a fella at the apple store that if you do get itunes up and running do not sync the ipod to the program like you normally do. You will lose everything. There is a faeture that will help you up load to itunes from you ipod. Be carefull.

Error message: When trying to run iTunes

I've just installed iTunes and I'm trying to run it, but every time i 'Agree' to the iTunes Software Liscence Agreement, I get an error that states,
"The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "My Music" folder.
I've tried making a folder inside my My Music folder, named iTunes, but the problem still persists.

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

"An error occured when trying to run iTunes.exe"

The problem I have occures when opening iTunes or when it has been open for approximately one minute. There's this error message poping up and tells me that iTunes ran into a problem and has to be closed. This also appears when trying to add music to the library before the error pops up.
I've tried about everything to correct the problem such as rebooting after install, reinstall, download different versions etc.
It doesn't seem to be able to solve. And that's why I ask you. I've never heard of anyone else facing this problem so I need tips.

hi Christopher!
There's this error message poping up and tells me that iTunes ran into a problem and has to be closed. This also appears when trying to add music to the library before the error pops up.
hmmm. you're right, that one is exotic.
recently, however, i've been seeing more and more unusual errors pop up when people have antivirus applications (or antispyware applications) blocking access to the itunes library. so let's try an experiment. does your itunes behave itself if you launch it (or do the other activities) under those circumstances?
keep us posted.
love, b

Error message 13005 when trying to run iTunes 8

Can anyone help me. I bought my new nano today. Have previously run iTunes with no problems but but today this error message comes up. Have uninstalled and re-installed to no avail.
Guy

Message numbers in the 13000 range are usually do to a problem with Genius. I have seen 2 totally different fixes posted here in the forums. edit - Sounds like you already tried method 1.
*Method 1*
Rename these files, or delete them
iTunes Library Genius.itdb
iTunes Library Extras.itdb
Try opening iTunes again. And turn off Genius as fast as you can. You can turn it back on later, but first get iTunes running.
*Method 2*
Go to Control Panel > Add/Remove Programs
Choose iTunes, press the Change button and then the repair button.
Message was edited by: Katrina S.

QuickTime not found error when trying to run iTunes 64 bit on W7, QuickTime not found error when trying to run iTunes 64 bit on W7

I have quicktime installed on windows 7, 64 bit, and then installed the 64 bit version of iTunes. Install is successful, but when I try ot run iTunes, I get an error - "QuickTime was not found". Any suggestions?

I have the same problem, and while I can 'fix' it with the approach described here, I have to 'fix' it that way EVERY TIME I launch itunes. I suppose the lousy support for mainstream computers is apple's way of saying, 'well of course you can't use your phone, you're not living in a (TM) apple home (TM) please sell your existing home and purchase one from apple if you want your phone to work.' I never would have imagined that as a computer programmer it would be a multi-hour/failed installation process to get iTunes and the iPhone4 working properly. What a joke.

When trying to run itune getting message that itunes has stopped working ?

I am getting following popup message "itunes has stopped working "
I have downloaded newest version & tried but it is still not working.
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.0.1.22
Application Timestamp: 4c9c64ce
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0800254e
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
My ipod (4th generation;2GB)shuffle has also stopped working.It gets detected on windows explorer shows the content but not playing anything.
Pl help.

many thanks. (Haven't seen one of these in a while, and now suddenly there's two in one day.)
I think some other application (apart from QuickTime itself) has stashed old QuickTime componentry on the PC in an unorthodox location. (Codec packs and video converters are the usual suspects with that, although some games might do the same.)
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
*If you have a 32-bit version of Windows,* open the "System32" folder.
*If you have a 64-bit version of Windows,* open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

After updating my iTunes to 10.4 I get an error message saying "iTunes was not insatlled correctly. Please reninstall iTunes. Error 7 (widows error 999). I reinstalled and still get same message when trying to run iTunes.

When I installed the update originally, it said it installed correctly. How do I fix this?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659)

R6034 error when trying to run iTunes

I had a runtime error R6034 in iTunes.exe. 'An application has made an attempt to load the C runtime library incorrectly'
I've removed iTunes player from my Windows7 laptop, and reinstalled but get the same error.
Any suggestions??

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99946)

Launching issue when trying to run itunes on windows vista, can anyone help? ive tried uninstalling and then reinstalling but still have the same error code

This has only occurred recently and I am not being able to load up itunes on my computer which is quite a pain

See Troubleshooting issues with iTunes for Windows updates.
tt2

I've got TWO problems when trying to run iTunes

Similar Messages

Maybe you are looking for