I've had it with itunes 7...can anyone post a link to last ver of itunes 6
I sick already of the 100% cpu usage that this junk apple have released as an alleged upgrade. Everything that it does, be it synching, downloading, importing etc just swallows CPU time. This is just a sloppy piece of work with no apparent testing.
Grateful if anyone can point me in the right diection of the last ver 6 of itunes and the ipod updater so I can downgrade to a working version.
http://www.apple.com/support/downloads/itunes605forwindows.html
copy and paste this into the address bar
Similar Messages
-
I have an oritinal iPad and need to restore it to factory settings. I've followed the instuctions from the reset menu. When it powers back up it takes me to a screen indicating I need to attach it to iTunes. The iPad was loaned to me so I did not have a need to back it up. Can anyone help me restore the settings without connecting to iTunes?
Helpjere-
When you reset to factory settings, you erased all content and settings. That restored it to factory settings except that it kept the latest iOS update.
The person who loaned it to you can connect it to iTunes on their computer. They will be given the option to restore from their backup.
Fred -
I've lost my itunes icon from my desktop and can't see it anywhere else. I have recently upgraded to windows 9 and thought maybe this had something to do with it. Can anyone help please?
Has iTunes been uninstalled or removed from you system?
Is it no longer in the Start Menu or in Control Panel?
What exactly was downloaded and installed? There is no Windows 9, so it's not possible that it is installed on your computer. -
Since I installed ios 6.1 in my iPhone 4, I can't sync it with iTunes. Can annyone help me? I have already reinstalled iTunes and reseted the iPhone, but it still doesn't sync. Thank you.
Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible
You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
http://support.apple.com/kb/PH1453 -
I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?
Right clicking on your ipod in the device list an d choosing "transfer purchases" will copy apps and bought media from iTunes to your computer. Due to the new iTunes library on your new HD, iTunes will erase your ipod during the first sync. To save your data to the computer take a look at this article about saving data from your device to a computer: http://support.apple.com/kb/HT4137
Basically it's backing up manually, transferring her purchases (apps and bought music), letting iTunes erase the ipod due to the new iTunes library, and restoring from the manual backup again, to get all the data and settings back.
Make sure your new computer account is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0 -
When i try to sync contact via itunes to outlook, it doesnt get sync, even i checked the sync contact with outlook. Can anyone guide whats the actual problem?
I have similar problems trying to synchronize my calendar, also after update on 7.1.1. on my Iphone 5.
It doesn;t replace the outlook entries on Iphone 5.
I didn,t try to synchronize the contacts, because it may fail.
Has any one an idea what could be the reasson for thid synchronize problems. -
My iphone 5 don't want to connect with itunes, what can I do... I have an itune reedem card with a balance $15.05 but I can buy anything
It seems as though you are describing two different things, unless you are trying to say that you cannot connect to the iTunes Store on through the phone. If that is correct, suggest you try and do a search, the question has been asked a great deal and answers can be found. Maybe even try and describe the error message you are seeing when trying to connect.
-
My 3GS will not power up. Tried restoring through iTunes but ended with failure. Can anyone help? Thanks
See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I had a computer problem and had to reinstall itunes. Can I sync my ipod shuffle to my new itunes?
This link will help you, http://support.apple.com/kb/TS1591
-
I dropped my iphone 3gs and the screen has gone blank now showing a white screen with no icons can anyone advise me how to fix it?
Tim is correct.
But, first step with 3GS white screen and most iPhone problems is Reset, hold both home and power buttons until iPhone begins to restart itself, usually about 10 seconds of holding both buttons. If still white screen.
Next step would be Restore the iPhone Firmware with iTunes on your computer. If still white screen.
Next step would be to follow Tim's advice, if you had not already. -
When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?
Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
I can't deauthorise my daughter's last computer from iTunes because it has crashed. We have three computers in the house but I can't authorise my new MacbookPro for iTunes or homesharing because it says I have 5 computers authorised (I don't). I can't even get my music from the iTunes library on my old Macbook onto my new one, because it won't let me sync my iPhone 5 with my old Macbook, as I can't update the iTunes software. So I have a new MacbookPro and a new iPhone 5 and I can't get any of my music on either of them. I feel singularly depressed.
As you have more than 1 computer authorised then you should be able to log into your account on your computer's iTunes (Store > View My Account) and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : authorising and deauthorising.
-
I have gone through all of the troubleshooting steps and still do not see my iPhone 4 (6.1.3) when I connect with USB to iTunes. Can anyone help?
I'd try removing and then re-installing iTunes. An uninstall will not remove your music etc. That should re-install the usb drivers etc. I don't think you can separately delete and install the drivers.
-
i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music
Maybe you are looking for
-
Data Not getting transferred in the Cube for 2LIS_03_BF
Hello Gurus, I have installed the cube 0IC_C03 from standard business content. While executing the data load , the data is seen in PSA but does not get updated in Cube The info package is on mode "In PSA and then at once in InfoCube" Regards Lalan
-
Every time I enable the OnBoard USB, in bios, the memory check takes ages.
yup. Every time I change the OnBoard USB to enabled in BIOS, the startup memory check takes for ages (approximately 5 minutes or so...)(the check jamms for a few numbers before it's finished, it jamms on numbers 104857 and after a little while it goe
-
Default Native directory password for accessing openldap data
hi everyone , i was trying to read openldap data from hyperion shared services . i know i can change the password in change native directory password for the root and i can read all the Ldap data. I was wondering if there is any default password for
-
Page layout skewed after comment added to blog post
I am having an issue where my page layout is all out of whack after a reader posts a comment. The body text of the blog post drops down the page to cover over the top comment. Also noticed that the weblink that the reader has entered doesn't work - I
-
JCoIDoc.Server HandleRequest IDoc
Hi Experts, I've some problem to use "JCoIDoc.Server". I try to send an IDoc CLSMAS03 to a non-sap system (using SAPJCo). With the sample code of the library, I'm able to process RFC call from SAP to my java application, call some BAPI's from Java to