I ve heard there is part of HR module needed to be installed

Hello
I never dealth with HR. I am pure technical person. I ve heard there is part of HR module needed to be installed and I have to react very quicly.
Can you help me please

Hi,
There is a HR module in SAP.Which will give all the employees data in the organization.Suppose this module is necessary you can install.
Regards
Suman Kumar

Similar Messages

I heard there is a recall for first generation iPods?

I heard there is a recall for first generation iPods due to the batteries catching fire. Where and how do we return for replacement?

Yes it every time you put the serial number it says that th iPod is not part of the recall program. I tried 4 days ago and it send me to my mail address to where they have to ship the box although I never completed. It is interesting that the program started in November 11/2011 and after November 11/2013 no one can have the product replaced.

I heard there was a security breach in Java installed in Macs and that there is a patch to fix it. But that's all I know. Is there more info available?

I heard there was a security breach in Java installed in Macs and that there is a patch to fix it, but that's all I know. Does anyone know how to fix it?

There isn't a patch for a computer running Leopard .
Leopard and earlier users see recommendations at: https://discussions.apple.com/thread/3872491

HT4208 Just gave my old ipad to Mother N Law. How do I get her up to speed? I heard there are some classes she can take. How do I make a reservation?

Just gave my old ipad to Mother N Law. How do I get her up to speed? I heard there are some classes she can take. How do I make a reservation?

They have Discover your iPad workshops at the Apple Store. Is there one near her?

I bought the Airport Extreme because I thought it would increase the range of the WiFi signal in my house. I have a DSL modem (also Wifi) and there are parts of the house that do not seem to have a strong Wifi signal.

I bought the Airport Extreme because I thought it would increase the range of the WiFi signal in my house. I have a DSL modem (also Wifi) and there are parts of the house that do not seem to have a strong Wifi signal. The Airport Extreme does not seem to be increasing my Wifi signal strength? Any thoughts on what I could be doing wrong? I am able to connect to it, etc. Just thought the strength would be better.

The broadcast power of all wireless routers and devices is limited by law.....and all manufacturers run their routers full blast.....so the relative signal strength of wireless routers from one manufacturer to another will tend to be remarkably similar.....despite the fancy advertising claims.
You may want to consider adding another AirPort Extreme to "extend" the signal strength in your home. If you decide to do this, the "extending" Extreme would normally need to be located at a point that is approximately half the distance from your "main" AirPort Extreme and the general area that needs more wireless coverage.

My eBay pages don't work properly. There are parts missing. The symbols on the My eBay page have gone. The £ paid sign, checkout, feedback, and probably more. I can't list an item as the submit button has disappeared. It all works fine on IE.

My eBay pages don’t work properly. There are parts missing. The symbols on the My eBay page have gone. The £ paid sign, checkout, feedback, and probably more.
I can’t list an item, as the submit button has disappeared.
It all works fine on IE. I’ve uninstalled and reinstalled Firefox, but still the same.
How can I regain my missing bits please.
Thanks

Can you attach a [http://en.wikipedia.org/wiki/Screenshot screenshot]?
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
See http://kb.mozillazine.org/Websites_look_wrong
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS. I heard there was a plug-in to download for this, but cannot find it. Help?

I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS. I heard there was a plug-in to download for this, but cannot find it. Help?

You would need at least CS3 with ACR 4.6 to natively edit NEFs from a D90 in PS:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
It might also work to use the DNG Converter 4.6 or newer to convert the NEF files to DNGs and then those might open in your older CS2 ACR, but I’m not sure, since it’s a 9 year old program I haven’t used in years.
The DNG Converter can be found, here:
http://www.adobe.com/downloads/updates.html

We are creating a photo book and on the cover in the lower right hand corner there is part of the title. We did not create it and cannot find how to delete it. Any ideas.

We are creating a photo book and on the cover in the lower right hand corner there is part of the title. The cover title is centred below the cover picture. We did not create it and cannot find how to delete it. Any ideas?

Preview according to this article and see what it does. http://support.apple.com/kb/PH2486
The printed book will match the preview
LN

I heard there is a new Apple TV for use with apple ipad air. Is this true?

I heard there is a new Apple TV for use with apple ipad air. Is this true?

Re: I heard there is a new Apple TV for use with apple ipad air. Is this true?

TS1702 I have the iPhone 3S and have the update to ios6 on my phone. Any reason NOT to update? I've heard there are issues ...

I have the iPhone 3gs. Any reason NOT to update to iOS6? I've heard there were glitches.

The iOS 6 is great, but really is there some issues with some people. This is your choice, but i would suggest to update only when the new version of the iOS 6 (probably the 6.0.1) comes out.

HT3986 I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation dis

I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation disc which, then said the installation had been successful.
Outlook is still not working. Can anyone please advise me on what to do next.

Remove MS Office 2011 completely (here are instructions) and reinstall it.
It's not a simple or fast process but it is important to follow all of the steps in order to get all the files that Office scatters around. This will not affect your data files, only MS Office and its preferences.

Is there any BAPI or function module to delete entries from a table (VBAK)

Hi Everybody,
this is my first thread in SDN...
my problem follows...
A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
tables:
VBAK     sales document: header data
selection fields:
VBAK-LIFSK      ≠     <BLANK>
VBAK-ERNAM     =     userID used by e-Sales / IVE
          (EP-BATCH / EAI-BATCH)
VBAK-ERDAT      <=     Current system Date
VBAK-ERZET     <=     Current system Time - 20 minutes
These orders should be deleted from SAP system.
This report should be scheduled to run regularly every 10 minutes.
my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
best replies will be rewarded....
regards
Reddy

Hi Vasanth ,
thanks for your reply.
i tried in the same manner what u mentioned.
but how to pass only one parameter to the functionmodule..
here in this case we have to pass only update flag as 'D'..
i did the same it giving dump..
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "ORDER_HEADER_INX".
Although the currently specified field
"INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.
my pgm :
*& Report YNEW_ORDER_DELETION
REPORT ynew_order_deletion.
TABLES:vbak.
PARAMETERS:
     p_lifsk LIKE vbak-lifsk DEFAULT '02'.
SELECT-OPTIONS:
   s_lifsk FOR vbak-lifsk DEFAULT '10',
    s_ernam FOR vbak-ernam,
    s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
    s_erzet FOR sy-uzeit.
*PARAMETERS:
p_erzet LIKE sy-uzeit.
   s_erdat like vbak-erdat,
   s_erzet like vbak-erzet.
DATA:
   BEGIN OF int_final OCCURS 0,
        w_vbeln TYPE vbak-vbeln,
   END OF int_final.
DATA:
int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
DATA:
wf_time TYPE sy-uzeit.
INITIALIZATION.
s_ernam-low = 'KULKARMA'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
s_ernam-low = 'EAI-BATCH'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
wf_time = sy-uzeit - 1200.
p_erzet = sy-uzeit - 1200.
p_erzet-low = wf_time.
APPEND s_erzet.
int_order_header_inx-updateflag = 'D'.
APPEND int_order_header_inx.
START-OF-SELECTION.
SELECT vbeln FROM vbak
                   INTO TABLE int_final
                   WHERE lifsk EQ p_lifsk
                     AND ernam IN s_ernam
                     AND erdat IN s_erdat
                     AND erzet IN s_erzet.
IF sy-subrc = 0.
    LOOP AT int_final.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
        EXPORTING
          salesdocument         = int_final-w_vbeln
ORDER_HEADER_IN             =
    order_header_inx            = int_order_header_inx
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
NO_STATUS_BUF_INIT          = ' '
        TABLES
          return                      = int_return
ORDER_ITEM_IN               =
ORDER_ITEM_INX              =
PARTNERS                    =
PARTNERCHANGES              =
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES              =
SCHEDULE_LINESX             =
ORDER_TEXT                  =
ORDER_KEYS                  =
CONDITIONS_IN               =
CONDITIONS_INX              =
EXTENSIONIN                 =
    ENDLOOP.
    LOOP AT int_return.
      WRITE:/ int_return-type,
              int_return-id,
              int_return-number,
              int_return-message.
    ENDLOOP.
ENDIF.
please help me ..its a very urgent issue to be solved...
am waiting for ur reply...
regards
gangareddy

Is there a limit on how many times I can install my CS5?

I own CS5 and have it installed on 2 computers. I need to upgrade my computers and am wondering if I am going to have any trouble installing CS5 onto new machines. Is there a limit on how many times I can install the program? Do I have to verify ownership first or what?

I believe the limit on how any times an application can be installed has been removed, but, as it stands, there is no limit to the number of installations you can have... just the number of activated installations. For what it sounds like you are doing, there is should not be an issue of hitting a limit even if there is one.
If you are reinstalling on new machines then you probably want to deactivate the current installations before you attempt to activate on the new machines.

I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.

Is there a way to leave Windows 7 OS and install Windows 8 additionaly

Is there a way to leave Windows 7 OS and install Windows 8 additionaly with Bootcamp 5, means to have a triple boot option or dual boot option where the windows partition can choose to start windows 7 or windows 8 ?

Welcome to the Apple Support Communities
The problem you have is that Boot Camp doesn't allow you to create more than two volumes on the hard drive: one for OS X and another one for Windows, so you can't create another one for another Windows. If you want to test Windows 8, I recommend you to download a virtual machine application like VirtualBox, create a virtual machine and install Windows 8 there

I ve heard there is part of HR module needed to be installed

Similar Messages

Maybe you are looking for